• There are no items in your cart

AS/NZS 61347.2.1:2002

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Lamp controlgear Particular requirements for starting devices (other than glow starters)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

02-20-2019

Language(s)

English

Published date

10-10-2002

Preview

Introduction1 Scope2 Normative references3 Definitions4 General requirements5 General notes on tests 5.1 Starting devices for use with lamps having different electrical characteristics 5.2 Number of specimens6 Classification7 Marking 7.1 Mandatory markings 7.2 Information to be provided, if applicable8 Protection against accidental contact with live parts9 Terminals10 Provisions for earthing11 Moisture resistance and insulation12 Electric strength13 Thermal endurance test for windings14 Fault conditions15 Heating of independent starting devices 15.1 Normal operation 15.2 Abnormal operation16 Pulse voltage of ignitors17 Mechanical strength18 Construction19 Creepage distances and clearances20 Screws, current-carrying parts and connections21 Resistance to heat, fire and tracking22 Resistance to corrosionAnnex A (normative) - Test to establish whether a conductive part is a live part which may cause an electric shockAnnex B (normative) - Particular requirements for thermally protected lamp controlgearAnnex C (normative) - Particular requirements for electronic lamp controlgear with means of protection against overheatingAnnex D (normative) - Requirements for carrying out the heating tests of thermally protected lamp controlgearAnnex E (normative) - Use of constant S other than 4500 in t[w] testsAnnex F (normative) - Draught-proof enclosureAnnex G (informative) - Explanation of the derivation of the values of pulse voltagesAnnex H (normative) - TestsAnnex I (normative) - Mechanical strength testingAnnex J (normative) - Precautions to be observed when measuring with sphere-gapsBibliography

Specifies safety requirements for starting devices for fluorescent and other discharge lamps for use on a.c. supplies up to 1000 volt at 50/60 Hz in combination with lamps and ballasts. This Standard is identical to and reproduced from IEC 61347-2-1:2000.

This part of IEC 61347 AS/NZS 61347 specifies particular safety requirements for starting devices (starters other than glow starters and ignitors) for fluorescent and other discharge lamps for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz which produce starting pulses not greater than 100 kV and which are used in combination with lamps and ballasts covered in IEC 60081, IEC 60188, IEC 60192, IEC 60662, IEC 60901, IEC 61167, IEC 61195, IEC 61199, IEC 61347-2-8 and IEC 61347-2-9.It does not apply to glow starters or starting devices which are incorporated in discharge lamps or which are manually operated. Preheat transformers for fluorescent lamps are covered by IEC 61347.2.8NOTE - Glow starters are dealt with in IEC 60155.This standard refers only to starting devices for use with ballasts and lamps which are internationally the most in demand.Performance requirements are given in IEC 60927.

Committee
EL-041
DocumentType
Standard
ISBN
0 7337 4861 9
Pages
15
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

First published as AS/NZS 61347.2.1:2002.

AS 2886-1986 Voltage measurement - Sphere-gap method (one sphere earthed)
AS 3864-1997 Medical refrigeration equipment - For the storage of blood and blood products
AS 4111-1993 Starters for fluorescent lamps - Performance requirements
AS/NZS 61347.1:2002 Lamp controlgear General and safety requirements (IEC 61347-1:2000, MOD)

AS/NZS 1158.6:2010 Lighting for roads and public spaces Luminaires
AS/NZS IEC 61347.2.13:2013 Lamp controlgear Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules (IEC 61347-2-13, Ed.1.0 (2006) MOD)
AS/NZS 61347.2.9:2004 Lamp controlgear Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps) (IEC 61347-2-9:2000 MOD)
AS/NZS 60927:2005 Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements (IEC 60927, Ed.2.2 (2004) MOD)
AS/NZS 60079.15:2006 Electrical apparatus for explosive gas atmospheres Construction, test and marking of type of protection, n electrical apparatus
AS/NZS 60079.15:2011 Explosive atmospheres Equipment protection by type of protection 'n'
AS/NZS 1158.6:2004 Lighting for roads and public spaces Luminaires
AS/NZS 60598.1:2003 Luminaires General requirements and tests (IEC 60598-1:2003, MOD)

View more information
US$69.34
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.