AS/NZS ISO 9000:2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
06-30-2017
English
06-16-2006
Provides guidance on the fundamentals of quality management systems as described in the ISO 9000 series of Standards and vocabulary of terms used in quality management. This Standard is identical with and has been reproduced from ISO 9000:2005, which incorporates the changes accepted in the ISO Draft Amendment, ISO/DAM 9000:2004.
| Committee |
QR-008
|
| DocumentType |
Standard
|
| ISBN |
0 7337 7512 8
|
| Pages |
30
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
| Standards | Relationship |
| ISO 9000:2005 | Identical |
First published in Australia as part of AS 1057-1971.Second edition 1982.Third edition 1985.AS 3900/ISO 9000 first published in Australia 1987.First published in New Zealand as part of NZS 5604:1987.NZS 5600.1 first published 1987.AS 3900-1987/ISO 9000:1987 and NZS 5600.1:1987 redesignated in 1990 as Joint Standard AS 3900-1987/NZS 9000:1990/ISO 9000:1987.Redesignated in 1992 as Joint Standard A 3900.1-1987/NZS 9000:1990/ISO 9000:1987.Jointly revised and redesignated AS/NZS ISO 9000.1:1994.AS 1057-1985 and NZS 5604:1987 jointly revised, amalgamated and redesignated in part as AS/NZS ISO 8402:1994.AS/NZS ISO 8402:1994 and AS/NZS ISO 9000.1:1994 revised, amalgamated and redesignated AS/NZS ISO 9000(Int):2000.Jointly revised and designated AS/NZS ISO 9000:2000.Fourth edition 2006. Originated in Australia as part of AS 1057-1971. Originated in New Zealand as part of NZ 5604:1987. Reissued as part of AS/NZS 8402:1994. Previous edition AS/NZS ISO 9000:2000. Fourth edition 2006.
| MP 87.2:2007 | Australian/New Zealand Certification Scheme for explosion-protected electrical equipment (ANZEx Scheme) Recognized Service Facilities Program - Basic rules and procedures |
| AS/NZS 4421:2011 | Guard and patrol security services |
| AS/NZS 2098.7:2006 | Methods of test for veneer and plywood Density of veneer and plywood |
| AS 2561-2010 | Guide to the determination and the use of quality costs (Reconfirmed 2022) |
| AS/NZS 5761:2011 | In-service safety inspection and testing - Second-hand equipment prior to sale |
| AS 5200.000-2006 | Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products (Reconfirmed 2018) |
| AS 2740-2001 | Wedge-type sockets |
| AS/NZS 2269.1:2008 | Plywood - Structural Determination of structural properties - Test methods |
| AS/NZS 4380:2001 | Motor vehicles - Cargo restraint systems - Transport webbing and components |
| AS/NZS 2097:2006 | Methods for sampling veneer and plywood (Reconfirmed 2016) |
| AS ISO 10017-2006 | Guidance on statistical techniques for ISO 9001:2000 (ISO/TR 10017, Ed. 2.0 (2003) MOD) |
| AS ISO 10015-2006 | Quality management - Guidelines for training (ISO 10015, MOD) |
| AS 2319-2001 | Rigging screws and turnbuckles |
| TS ISO 16949:2011 | Quality management - Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations (Reconfirmed 2016) |
| AS ISO 15189-2009 | Medical laboratories - Particular requirements for quality and competence |
| HB 90.1:2012 | The Small Business Handbook - Guide to ISO 9001:2008 |
| AS/NZS 3750.7:2009 | Paints for steel structures Aluminium paint (Reconfirmed 2021) |
| AS/NZS 1314:2003 | Prestressing anchorages (Reconfirmed 2016) |
| AS/NZS 2098.2:2012 | Methods of test for veneer and plywood Bond quality of plywood (chisel test) |
| AS/NZS 5762:2011 | In-service safety inspection and testing - Repaired electrical equipment |
| AS/NZS 2098.4:2006 | Methods of test for veneer and plywood Measurement of dimensions and shape for sheets of veneer and plywood |
| AS/NZS 4345:2001 | Motor vehicles - Cargo restraint systems - Transport fibre rope |
| AS/NZS 2098.8:2006 | Methods of test for veneer and plywood Water absorption and thickness swelling of unpainted plywood (Reconfirmed 2016) |
| AS 3864.2-2012 | Medical refrigeration equipment - For the storage of blood and blood products User-related requirements for care, maintenance, performance verification and calibration |
| AS/NZS 2022:2003 | Anhydrous ammonia - Storage and handling (Reconfirmed 2023) |
| AS/NZS 2098.5:2006 | Methods of test for veneer and plywood Resistance of gluelines in plywood to attack by micro-organisms |
| AS EN 50089-2013 | Cast resin partitions for metal-enclosed gas-filled high-voltage switchgear and controlgear |
| AS/NZS ISO/IEC 90003:2007 | Software engineering - Guidelines for the application of AS/NZS ISO 9001:2000 to computer software |
| AS/NZS ISO 10001:2012 | Quality management - Customer satisfaction - Guidelines for codes of conduct for organizations |
| AS 62103-2006 | Electronic equipment for use in power installations |
| AS 2758.2-2009 | Aggregates and rock for engineering purposes Aggregate for sprayed bituminous surfacing |
| AS/NZS 2098.2:2006 | Methods of test for veneer and plywood Bond quality of plywood (chisel test) |
| AS/NZS 2098.1:2006 | Methods of test for veneer and plywood Moisture content of veneer and plywood |
| AS 4049.2-2005 | Paints and related materials - Pavement marking materials Thermoplastic pavement marking materials - For use with surface applied glass beads |
| AS/NZS 2098.6:2006 | Methods of test for veneer and plywood Depth of peeler checks in veneer and plywood |
| AS 1085.15-1995 | Railway permanent way material - Part 15: Aluminothermic rail welding |
| AS/NZS 4360:2004 | Risk management |
| AS EN 50069-2013 | Welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear |
| AS 1154.1-2004 | Insulator and conductor fittings for overhead power lines - Performance, material, general requirements and dimensions |
| AS 3533.1-2009 | Amusement rides and devices Design and construction |
| AS/NZS 5050:2010 | Business continuity - Managing disruption-related risk |
| AS/NZS 4344:2001 | Motor vehicles - Cargo restraint systems - Transport chain and components |
| AS IEC 62347-2008 | Guidance on system dependability specifications (Reconfirmed 2018) |
| AS 1394-2001 | Round steel wire for ropes |
| AS/NZS 2269.1:2012 | Plywood - Structural Determination of structural properties - Test methods |
| MP 87.1:2008 | Australian/New Zealand Certification Scheme for explosion-protected electrical equipment (ANZEx Scheme) Product Certification Program - Basic rules and procedures |
| TS ISO 10004:2011 | Quality management - Customer satisfaction - Guidelines for monitoring and measuring |
| AS/NZS ISO 9001:2008 | Quality management systems - Requirements |
| AS 4371-2012 | Ceramic tableware |
| AS 5812-2011 | Manufacturing and marketing of pet food |
| AS 4049.1-2005 | Paints and related materials - Pavement marking materials Solvent-borne paint - For use with surface applied glass beads (Reconfirmed 2016) |
| AS/NZS 80079.34:2012 | Explosive atmospheres Application of quality systems for equipment manufacture |
| AS 1397-2001 | Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated |
| AS/NZS 3584.3:2012 | Diesel engine systems for underground coal mines Maintenance |
| AS/NZS 2098.3:2006 | Methods of test for veneer and plywood Bond quality and strength of scarf joints in plywood (Reconfirmed 2016) |
| AS/NZS 3760:2010 | In-service safety inspection and testing of electrical equipment |
| AS/NZS ISO 3834.1:2008 | Quality requirements for fusion welding of metallic materials Criteria for the selection of the appropriate level of quality requirements (Reconfirmed 2018) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.