ASHRAE 62.1 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
11-28-2019
07-18-2018
Foreword
1 Purpose
2 Scope
3 Definitions
4 Outdoor Air Quality
5 Systems and Equipment
6 Procedures
7 Construction and System Start-Up
8 Operations and Maintenance
9 References
Normative Appendix A: Multiple-Zone Systems
Normative Appendix B: Separation of Exhaust Outlets
and Outdoor Air Intakes
Informative Appendix C: Summary of Selected Air Quality
Guidelines
Informative Appendix D: Rationale for Minimum Physiological
Requirements for Respiration Air
Based on CO[2] Concentration
Informative Appendix E: Acceptable Mass Balance Equations for
Use with the IAQ Procedure
Informative Appendix F: Information on Selected National
Standards and Guidelines for
PM10, PM2.5, and Ozone
Informative Appendix G: Application and Compliance
Informative Appendix H: Documentation
Informative Appendix I: National Ambient Air Quality
Standards (NAAQS)
Informative Appendix J: Informative References
Informative Appendix K: Addenda Description Information
Describes minimum ventilation rates and other measures intended to provide indoor air quality that is acceptable to human occupants and that minimizes adverse health effects.
This standard applies to spaces intended for human occupancy within buildings except those within dwelling units in residential occupancies in which occupants are nontransient.2.2
| Committee |
TC 4.3
|
| DevelopmentNote |
Supersedes and redesignates ASHRAE 62 (02/2005) Draft addenda a & b are available for public review. (09/2016) Also available in Spanish translation; See ASHRAE 62.1 SPANISH. (01/2017) Draft addenda f, g, h, j, k, m, n, o, q, r, t, v, w, y, z, o, p, l, s & u are available for public review. (03/2018)
|
| DocumentType |
Standard
|
| Pages |
61
|
| PublisherName |
American Society of Heating, Refrigerating & Air Conditioning Engineers
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE ARP 1315 : 2013 | SAFETY CONSIDERATIONS FOR AIRPLANE LAVATORIES |
| Z5000-18 | Building commissioning for energy using systems |
| NFPA 5000 : 2018 | BUILDING CONSTRUCTION AND SAFETY CODE |
| AHRI GUIDELINE W (I-P) : 2014 | SELECTING, SIZING, & SPECIFYING PACKAGED AIR-TO-AIR ENERGY RECOVERY VENTILATION EQUIPMENT |
| ICC 2015 INT. SOLAR ENERGY PRO. & COMM. : 2015 | 2015 (ISEP[TM]) INTERNATIONAL SOLAR ENERGY PROVISIONS[TM] COMMENTARY |
| ASHRAE GUIDELINE 1-4 SPANISH : 2014 | PROCEDURES FOR PREPARING FACILITY SYSTEMS MANUALS |
| UFC 3-540-08 : 2017 | UNIFIED FACILITIES CRITERIA - UTILITY-SCALE RENEWABLE ENERGY SYSTEMS |
| UFC 3-520-05 : Change 1 | UNIFIED FACILITIES CRITERIA - STATIONARY BATTERY AREAS |
| UFC 4-510-01 : Change 2 | UNIFIED FACILITIES CRITERIA - DESIGN: MILITARY MEDICAL FACILITIES |
| FC 4-211-03F : 2016 | FACILITIES CRITERIA - AIR FORCE FIGHTER ENGINE MAINTENANCE FACILITY |
| FC 4-721-02F : 2015 | FACILITIES CRITERIA - AIR FORCE LEVEL 1 CONFINEMENT FACILITY |
| FC 4-740-14N : 2014 | FACILITIES CRITERIA - NAVY AND MARINE CORPS CHILD DEVELOPMENT CENTERS |
| ASHRAE GHCDGS HEAT PUMP SYSTEMS : 2014 ERRATA 2016 | GEOTHERMAL HEATING AND COOLING DESIGN OF GROUND-SOURCE HEAT PUMP SYSTEMS |
| ASHRAE GUIDELINE 29 : 2009 | GUIDELINE FOR THE RISK MANAGEMENT OF PUBLIC HEALTH AND SAFETY IN BUILDINGS |
| ASHRAE GUIDELINE 32 : 2012 | SUSTAINABLE, HIGH-PERFORMANCE OPERATIONS AND MAINTENANCE |
| ASHRAE/ACCA 180 : 2008 | STANDARD PRACTICE FOR INSPECTION AND MAINTENANCE OF COMMERCIAL BUILDING HVAC SYSTEMS |
| ASHRAE GUIDELINE 13 : 2014 | SPECIFYING BUILDING AUTOMATION SYSTEMS |
| ASHRAE 145.1 : 2015 | LABORATORY TEST METHOD FOR ASSESSING THE PERFORMANCE OF GAS-PHASE AIR-CLEANING SYSTEMS: LOOSE GRANULAR MEDIA |
| ASHRAE HDBK HVAC APPLICATIONS : 2015 | ASHRAE HANDBOOK - HVAC APPLICATIONS |
| ASHRAE/ASHE 170 SPANISH : 2008 | VENTILATION OF HEALTH CARE FACILITIES |
| ASHRAE 161 : 2018 | AIR QUALITY WITHIN COMMERCIAL AIRCRAFT |
| ASHRAE 189.1 : 2014 | DESIGN OF HIGH-PERFORMANCE GREEN BUILDINGS |
| ASHRAE 62.2 : 2016 | VENTILATION AND ACCEPTABLE INDOOR AIR QUALITY IN RESIDENTIAL BUILDINGS |
| UFC 4-720-01 : 2012 | UNIFIED FACILITIES CRITERIA - LODGING FACILITIES |
| UFC 4-024-01 : 2008 | UNIFIED FACILITIES CRITERIA - SECURITY ENGINEERING: PROCEDURES FOR DESIGNING AIRBORNE CHEMICAL, BIOLOGICAL, AND RADIOLOGICAL PROTECTION FOR BUILDINGS |
| FC 4-760-10N : 2013 | FACILITIES CRITERIA - NAVY MUSEUMS AND HISTORIC RESOURCE FACILITIES |
| API 752 REDLINE : 2009 | MANAGEMENT OF HAZARDS ASSOCIATED WITH LOCATION OF PROCESS PLANT PERMANENT BUILDINGS |
| CSA Z1610 : 2011 : FR | PROTECTION OF FIRST RESPONDERS FROM CHEMICAL, BIOLOGICAL, RADIOLOGICAL, AND NUCLEAR (CBRN) EVENTS |
| CSA Z1610 : 2011 : R2016 | PROTECTION OF FIRST RESPONDERS FROM CHEMICAL, BIOLOGICAL, RADIOLOGICAL, AND NUCLEAR (CBRN) EVENTS |
| ANSI Z9.14 : 2014 | TESTING AND PERFORMANCE-VERIFICATION METHODOLOGIES FOR VENTILATION SYSTEMS FOR BIOSAFETY LEVEL 3 (BSL-3) AND ANIMAL BIOSAFETY LEVEL 3 (ABSL-3) FACILITIES |
| ASHRAE 113 : 2013 | METHOD OF TESTING FOR ROOM AIR DIFFUSION |
| ANSI/AAMI ST79:2017 | COMPREHENSIVE GUIDE TO STEAM STERILIZATION AND STERILITY ASSURANCE IN HEALTH CARE FACILITIES |
| ASHRAE PRINCIPLES OF HVAC : 2017 | PRINCIPLES OF HEATING, VENTILATING AND AIR-CONDITIONING |
| ANSI/ASSP Z9.10 : 2017 | FUNDAMENTALS GOVERNING THE DESIGN AND OPERATION OF DILUTION VENTILATION SYSTEMS IN INDUSTRIAL OCCUPANCIES |
| FC 4-740-02N : 2014 | FACILITIES CRITERIA - NAVY AND MARINE CORPS FITNESS CENTERS |
| FC 4-730-10N : 2013 | FACILITIES CRITERIA - NAVY AND MARINE CORPS FIRE STATIONS |
| UFC 3-410-01 : Change 4 | UNIFIED FACILITIES CRITERIA - HEATING, VENTILATING, AND AIR CONDITIONING SYSTEMS |
| UFC 1-200-02 : Change 1 | UNIFIED FACILITIES CRITERIA - HIGH PERFORMANCE AND SUSTAINABLE BUILDING REQUIREMENTS |
| FC 4-721-10N : Change 6 | UNIFIED FACILITIES CRITERIA - NAVY AND MARINE CORPS UNACCOMPANIED HOUSING |
| VDI 6022 Blatt 7.1:2013-10 | Ventilation and indoor-air quality - Branch-specific guides - Waste treatment plants |
| FC 4-179-03F : 2015 | FACILITIES CRITERIA - AIR FORCE INDOOR SMALL ARMS FIRING RANGE |
| UFC 4-021-02 : 2013 | UNIFIED FACILITIES CRITERIA - ELECTRONIC SECURITY SYSTEMS |
| AIHA Z9.7 : 2007 | RECIRCULATION OF AIR FROM INDUSTRIAL PROCESS EXHAUST SYSTEMS |
| CSA Z1610 : 2011 | PROTECTION OF FIRST RESPONDERS FROM CHEMICAL, BIOLOGICAL, RADIOLOGICAL, AND NUCLEAR (CBRN) EVENTS |
| ISO 23045:2008 | Building environment design Guidelines to assess energy efficiency of new buildings |
| ICC IEBC CODE AND COMMENTARY : 2015 | IEBC® Code and Commentary |
| ICC IECC CODE AND COMMENTARY : 2015 | IECC® Code and Commentary |
| ASTM D 5952 : 2008 | Standard Guide for the Inspection of Water Systems for Legionella and the Investigation of Possible Outbreaks of Legionellosis (Legionnaires' Disease or Pontiac Fever) |
| ASHRAE GUIDELINE 24 : 2015 | VENTILATION AND INDOOR AIR QUALITY IN LOW-RISE RESIDENTIAL BUILDINGS |
| ICC 2012 INT. EXIST. BUILDING CODE : 2012 | INTERNATIONAL EXISTING BUILDING CODE |
| ICC IMC Code and Commentary : 2015 | IMC® Code and Commentary |
| NASA SSTD 8070 0084 : 2014 | HVAC AND DOMESTIC HOT WATER DESIGN STANDARD |
| ASTM D 5952 : 2008 : R2015 | Standard Guide for the Inspection of Water Systems for Legionella and the Investigation of Possible Outbreaks of Legionellosis (Legionnaires' Disease or Pontiac Fever) (Withdrawn 2024) |
| NASA SSTD 8070 0086 : 2016 | HVAC AND DOMESTIC HOT WATER OPERATIONAL AND MAINTENANCE STANDARD FOR ENERGY CONSERVATION |
| ASHRAE 188 : 2015 | LEGIONELLOSIS: RISK MANAGEMENT FOR BUILDING WATER SYSTEMS |
| ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
| AAMI ST91 : 2015 | FLEXIBLE AND SEMI-RIGID ENDOSCOPE PROCESSING IN HEALTH CARE FACILITIES |
| API 752 : 2009 | MANAGEMENT OF HAZARDS ASSOCIATED WITH LOCATION OF PROCESS PLANT PERMANENT BUILDINGS |
| C500-18 | Monitoring and energy performance measurement of industrial refrigeration systems (IRS) using benchmark energy factor (BEF) concepts |
| BS ISO 16814:2008 | Building environment design. Indoor air quality. Methods of expressing the quality of indoor air for human occupancy |
| ISO 16814:2008 | Building environment design Indoor air quality Methods of expressing the quality of indoor air for human occupancy |
| MIL-STD-1474 Revision E:2015 | NOISE LIMITS |
| ASHRAE/ASHE 189.3 : 2017 | DESIGN, CONSTRUCTION, AND OPERATION OF SUSTAINABLE HIGH-PERFORMANCE HEALTH CARE FACILITIES |
| ASHRAE/ASHE 170 : 2017 | VENTILATION OF HEALTH CARE FACILITIES |
| ASHRAE 90.4 : 2016 | ENERGY STANDARD FOR DATA CENTERS |
| ASTM E 2619/E2619M : 2017 : REDLINE | Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings |
| ISO/TR 17772-2:2018 | Energy performance of buildings Overall energy performance assessment procedures Part 2: Guideline for using indoor environmental input parameters for the design and assessment of energy performance of buildings |
| ICC 2012 INTERNATIONAL MECH. CODE : 2012 | INTERNATIONAL MECHANICAL CODE |
| NFPA 5000:2024 | Building Construction and Safety Code |
| AIHA Z9.5 : 2012 | LABORATORY VENTILATION |
| NFPA 31 : 2016 | INSTALLATION OF OIL-BURNING EQUIPMENT |
| ASHRAE 52.2 : 2017 | METHOD OF TESTING GENERAL VENTILATION AIR-CLEANING DEVICES FOR REMOVAL EFFICIENCY BY PARTICLE SIZE |
| CFR 21(PTS170-199) : 0 | FOOD AND DRUGS - FOOD AND DRUG ADMINISTRATION, CHAPTER 1 DEPARTMENT OF HEALTH AND HUMAN SERVICES - PARTS 170-199 |
| NFPA 90A : 2018 | INSTALLATION OF AIR-CONDITIONING AND VENTILATING SYSTEMS |
| ASHRAE 129 : 1997 | MEASURING AIR-CHANGE EFFECTIVENESS |
| NFPA 90B : 2018 | INSTALLATION OF WARM AIR HEATING AND AIR-CONDITIONING SYSTEMS |
| AMCA 511 : 2016 | CERTIFIED RATINGS PROGRAM - PRODUCT RATING MANUAL FOR AIR CONTROL DEVICES |
| ASHRAE HDBK HVAC APPLICATIONS : 2015 | ASHRAE HANDBOOK - HVAC APPLICATIONS |
| UL 181:11ED 2013-07 | Factory-Made Air Ducts and Air Connectors |
| CFR 40(PTS50-51) : JUL 2017 | PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY |
| NSF 60 : 2016 | DRINKING WATER TREATMENT CHEMICALS - HEALTH EFFECTS |
| AMCA 500 L : 2015 | LABORATORY METHODS OF TESTING LOUVERS FOR RATING |
| NSF 49 : 2016 | BIOSAFETY CABINETRY: DESIGN, CONSTRUCTION, PERFORMANCE, AND FIELD CERTIFICATION |
| NFPA 54 : 2018 | NATIONAL FUEL GAS CODE |
| NFPA 211 : 2016 | CHIMNEYS, FIREPLACES, VENTS, AND SOLID FUEL-BURNING APPLIANCES |
| ANSI Z223.1 : 2018 | NATIONAL FUEL GAS CODE |
| ASTM D 3273 : 2016 : REDLINE | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.