ASME B16.4 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
GRAY IRON THREADED FITTINGS: CLASSES 125 AND 250
Hardcopy , PDF
01-08-2024
English
07-18-2018
Foreword
Committee Roster
Correspondence With the B16 Committee
Summary of Changes
List of Changes in Record Number Order
1 Scope
2 General
3 Pressure-Temperature Ratings
4 Size
5 Marking
6 Material
7 Dimensions and Tolerances
8 Threading
9 Ribs
10 Plugs, Bushings, and Locknuts
11 Face Bevel
12 Coatings
Mandatory Appendices
I - Dimensions of Fittings in U.S. Customary Units
II - References
Nonmandatory Appendix
A - Quality System Program
Describes: (a) pressure-temperature ratings; (b) sizes and method of designating openings of reducing fittings; (c) marking; (d) material; (e) dimensions and tolerances; (f) threading; and (g) coatings.
This Standard for gray iron threaded fittings,Classes 125 and 250, covers(a) pressure–temperature ratings(b) sizes and method of designating openings ofreducing fittings(c) marking(d) material(e) dimensions and tolerances(f) threading(g) coatingsMandatory Appendix I provides table values inU.S. Customary units.
DocumentType |
Standard
|
ISBN |
9780791871287
|
Pages |
32
|
PublisherName |
American Society of Mechanical Engineers
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
CSA 6.18 : 2002 | SERVICE REGULATORS FOR NATURAL GAS |
ASTM F 1139 : 1988 : R1998 | Standard Specification for Steam Traps and Drains |
CSA 6.18-02 (R2017) | Service Regulators for Natural Gas |
ASTM F 1172 : 1988 : R2015 : EDT 1 | Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type |
ASTM F 1199 : 1988 : R2015 | Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum) |
ASTM F 1006 : 1986 : R2014 : EDT 1 | Standard Specification for Entrainment Separators for Use in Marine Piping Applications |
ASTM F 1201 : 1988 : R2010 | Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
ASTM F 1199 : 1988 : R2004 | Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum) |
ASME PTB 2 : 2009 | GUIDE TO LIFE CYCLE MANAGEMENT OF PRESSURE EQUIPMENT INTEGRITY |
ASTM F 1201 : 1988 : R2004 | Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
ASTM F 1271 : 1990 : R2012 | Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
ASTM F 1271 : 1990 : R2018 | Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
ASME PV CODE 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF POWER BOILERS |
ASTM F 1006 : 1986 : R2004 | Standard Specification for Entrainment Separators for Use in Marine Piping Applications |
ASME B31.3:2016 | PROCESS PIPING |
ASTM F 1201 : 1988 : R2016 | Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
MIL F 52618 : D | FITTING, PIPE, ALUMINUM ALLOY (THREADED) 150 POUND, GENERAL SPECIFICATION FOR |
ASTM F 1172 : 1988 : R2010 | Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type |
ASTM F 1199 : 1988 : R1998 | Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum) |
ASTM F 1172 : 1988 : R1998 | Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type |
ASTM F 1006 : 1986 : R2008 | Standard Specification for Entrainment Separators for Use in Marine Piping Applications |
ASME B31.5 : 2016 | REFRIGERATION PIPING AND HEAT TRANSFER COMPONENTS |
ASME B16.15 : 2013 | CAST COPPER ALLOY THREADED FITTINGS: CLASSES 125 AND 250 |
ASTM F 1199 : 1988 : R2010 | Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum) |
NFPA 11 : 2016 | LOW-, MEDIUM-, AND HIGH-EXPANSION FOAM |
ASTM F 1200 : 1988 : R2016 | Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
ASTM F 1139 : 1988 : R2010 | Standard Specification for Steam Traps and Drains |
ASTM F 1201 : 1988 : R1998 | Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
ASTM F 1006 : 1986 : R1997 | Standard Specification for Entrainment Separators for Use in Marine Piping Applications |
ASTM F 1172 : 1988 : R2004 | Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type |
ASME B31.1 : 2016 | POWER PIPING |
MIL-DTL-52618-8 Revision E:2012 | FITTINGS, PIPE, ALUMINUM-ALLOY THREADED, 150-POUND, OUTSIDE HEAD, INSIDE HEAD, AND FACE BUSHINGS |
ASME B31.12 : 2014 | HYDROGEN PIPING AND PIPELINES |
ASME B31.3 SPANISH : 2010 | PROCESS PIPING |
ASTM F 1271 : 1990 : R2006 | Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
NFPA 15 : 2017 | WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION |
ASTM F 1139 : 1988 : R2004 | Standard Specification for Steam Traps and Drains |
NFPA 14 : 2016 | INSTALLATION OF STANDPIPE AND HOSE SYSTEMS |
ASTM F 1139 : 1988 : R2015 | Standard Specification for Steam Traps and Drains |
ASTM F 1200 : 1988 : R2004 | Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
ASTM F 1271 : 1990 : R1995 : EDT 1 | Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
MSS SP 25 : 2013 | STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS |
MIL F 52618/9 : A | FITTINGS, PIPE, ALUMINUM ALLOY (THREADED) 150 POUND: GENERAL SPECIFICATION FOR |
MSS SP 88 : 2015 | DIAPHRAGM VALVES |
CSA 6.18 : 2002 : R2013 | SERVICE REGULATORS FOR NATURAL GAS |
ASTM F 1200 : 1988 : R1998 | Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
ASTM F 1271 : 1990 : R2001 | Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
ASTM F 1200 : 1988 : R2010 | Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
ISO 9001:2015 | Quality management systems — Requirements |
ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.