• There are no items in your cart

ASME B31.3:2016

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

PROCESS PIPING
Available format(s)

Hardcopy , PDF

Superseded date

08-05-2019

Language(s)

English

Published date

01-01-2016

Foreword
Committee Roster
Introduction
Summary of Changes
Chapter I - Scope and Definitions
Chapter II - Design
Chapter III - Materials
Chapter IV - Standards for Piping Components
Chapter V - Fabrication, Assembly, and Erection
Chapter VI - Inspection, Examination, and Testing
Chapter VII - Nonmetallic Piping and Piping Lined
              With Nonmetals
Chapter VIII - Piping for Category M Fluid Service
Chapter IX - High Pressure Piping
Chapter X - High Purity Piping
Appendices
A - Allowable Stresses and Quality Factors for Metallic
    Piping and Bolting Materials
B - Stress Tables and Allowable Pressure Tables for Nonmetals
C - C Physical Properties of Piping Materials
D - Flexibility and Stress Intensification Factors
E - Reference Standards
F - Guidance and Precautionary Considerations
G - Safeguarding
H - Sample Calculations for Branch Reinforcement
J - Nomenclature
K - Allowable Stresses for High Pressure Piping
L - Aluminum Alloy Pipe Flanges
M - Guide to Classifying Fluid Services
N - Application of ASME B31.3 Internationally
Q - Quality System Program
R - Use of Alternative Ultrasonic Acceptance Criteria
S - Piping System Stress Analysis Examples
V - Allowable Variations in Elevated Temperature Service
X - Metallic Bellows Expansion Joints
Z - Preparation of Technical Inquiries
Index

Describes Rules for the Process Piping Code Section B31.31 have been developed considering piping typically found in petroleum refineries; chemical, pharmaceutical, textile, paper, semiconductor, and cryogenic plants; and related processing plants and terminals.

DevelopmentNote
SPANISH edition of 2010 version is still available, see ASME B31.3 SPANISH. (10/2012)
DocumentType
Standard
ISBN
9780791871195
Pages
562
PublisherName
American Society of Mechanical Engineers
Status
Superseded
SupersededBy
Supersedes

API 941 : 2016 STEELS FOR HYDROGEN SERVICE AT ELEVATED TEMPERATURES AND PRESSURES IN PETROLEUM REFINERIES AND PETROCHEMICAL PLANTS
NFPA 318 : 2018 PROTECTION OF SEMICONDUCTOR FABRICATION FACILITIES
NFPA 654 : 2017 PREVENTION OF FIRE AND DUST EXPLOSIONS FROM THE MANUFACTURING, PROCESSING, AND HANDLING OF COMBUSTIBLE PARTICULATE SOLIDS
ASCE 7 10 : 2011 MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES
API 15S : 2016 SPOOLABLE REINFORCED PLASTIC LINE PIPE
API 16D:2004 SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT
API 676 : 2009 : R2015 POSITIVE DISPLACEMENT PUMPS - ROTARY
API 578 : 2018 GUIDELINES FOR A MATERIAL VERIFICATION PROGRAM (MVP) FOR NEW AND EXISTING ASSETS
API STD 602 : 2015+ERR 1 : 2016 GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES
EN 16125:2015 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
API 674 : 2010(R2016) POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
API RP 2611 : 2011 TERMINAL PIPING INSPECTION - INSPECTION OF IN-SERVICE TERMINAL PIPING SYSTEMS
API 623 : 2013 STEEL GLOBE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS
API 53 : 2012 BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS
UFC 3-540-08 : 2017 UNIFIED FACILITIES CRITERIA - UTILITY-SCALE RENEWABLE ENERGY SYSTEMS
EN ISO 13631:2002 Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002)
NBR 15827 : 2014 INDUSTRIAL VALVES FOR INSTALLATIONS OF EXPLORATION, PRODUCTION, REFINING AND TRANSPORT OF PETROL PRODUCTS - REQUIREMENTS FOR DESIGN AND PROTOTYPE TEST
API 570 : 2016 PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS
API 600 CHINESE : 2015 STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS
API 612 : 2014 PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - STEAM TURBINES - SPECIAL-PURPOSE APPLICATIONS
API 603 RUSSIAN : 2013 CORROSION-RESISTANT, BOLTED BONNET GATE VALVES - FLANGED AND BUTT-WELDING ENDS
API 2510A : 1996 : R2010 FIRE-PROTECTION CONSIDERATIONS FOR THE DESIGN AND OPERATION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE FACILITIES
EN ISO 10442:2002 Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors (ISO 10442:2002)
EN ISO 13628-15:2011 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 15: Subsea structures and manifolds (ISO 13628-15:2011)
NORSOK L 005:2013 COMPACT FLANGED CONNECTIONS
NFPA 58 : 2017 LIQUEFIED PETROLEUM GAS CODE
NFPA 51 : 2018 DESIGN AND INSTALLATION OF OXYGEN-FUEL GAS SYSTEMS FOR WELDING, CUTTING, AND ALLIED PROCESSES
NFPA 59 : 2018 UTILITY LP-GAS PLANT CODE
AWWA M45 : 3 FIBERGLASS PIPE DESIGN
API 602 RUSSIAN : 2009 STEEL GATE, GLOBE, AND CHECK VALVES FOR SIZES NPS 4 (DN 100) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES
API 538 : 2015 INDUSTRIAL FIRED BOILERS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE
ANSI/CSA AMERICA FC 3-2004 (R2017) PORTABLE FUEL CELL POWER SYSTEMS
API TR 938-C : 2015 USE OF DUPLEX STAINLESS STEELS IN THE OIL REFINING INDUSTRY
AWS D10.10/D10.10M : 1999 : R2009 RECOMMENDED PRACTICES FOR LOCAL HEATING OF WELDS IN PIPING AND TUBING
API 945 : 2003 : R2008 AVOIDING ENVIRONMENTAL CRACKING IN AMINE UNITS
API 573 : 2013 INSPECTION OF FIRED BOILERS AND HEATERS
ICC 2012 INTERNATIONAL BUILDING CODE : 2012 INTERNATIONAL BUILDING CODE
MSS SP 110 : 2010 BALL VALVES THREADED, SOCKET-WELDING, SOLDER JOINT, GROOVED AND FLARED ENDS
PIP PNC00001 : 2013 PIPE SUPPORT CRITERIA FOR ASME B31.3 - METALLIC PIPING
NACE RP 02 86 : 2002 ELECTRICAL ISOLATION OF CATHODICALLY PROTECTED PIPELINES
API 616 : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API 619 : 2010 ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
NFPA 86D : 1999 INDUSTRIAL FURNACES USING VACUUM AS AN ATMOSPHERE
NORSOK U-009:2011 LIFE EXTENSION FOR SUBSEA SYSTEMS
NFPA 52 : 2016 VEHICULAR NATURAL GAS FUEL SYSTEMS CODE
API 608 RUSSIAN : 2012 METAL BALL VALVES - FLANGED, THREADED AND WELDING ENDS
API 677 : 2006 : R2010 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
API 579-1 : 2016 FITNESS-FOR-SERVICE
NORSOK D 007:2013 WELL TESTING SYSTEM
NFPA 850 : 2015 FIRE PROTECTION FOR ELECTRIC GENERATING PLANTS AND HIGH VOLTAGE DIRECT CURRENT CONVERTER STATIONS
MSS SP 88 : 2015 DIAPHRAGM VALVES
UFC 3-310-04 : Change 1 UNIFIED FACILITIES CRITERIA - SEISMIC DESIGN FOR BUILDINGS
EEMUA 193 : 2013 MANAGING COMPETENCE ASSURANCE FOR PERSONNEL UNDERTAKING IN-SERVICE INSPECTION OF PRESSURE EQUIPMENT
EEMUA 168 : 2010 GUIDE TO THE PRESSURE TESTING OF IN-SERVICE PRESSURISED EQUIPMENT
EEMUA 223 : 2010 PRESSURE EQUIPMENT TESTING AFTER REPAIR, MODIFICATIONS OR RE-RATING: A GUIDE TO THE PRESSURE TEST WAIVER
ASME B16.34 : 2017 VALVES - FLANGED, THREADED, AND WELDING END
API 677 :2006 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
API 2610:2005 DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES
API 674 : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
EN ISO 13628-3:2000 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems (ISO 13628-3:2000)
EN ISO 28921-2:2017 Industrial valves - Isolating valves for low-temperature applications - Part 2: Type testing (ISO 28921-2:2015)
EN ISO 28921-1:2017 Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013)
EEMUA 164 : 1993 SEAL-LESS CENTRIFUGAL PUMPS - CLASS 1
EN 14870-3:2006 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges (ISO 15590-3:2004, modified)
EEMUA 151 : 1987 LIQUID RING VACUUM PUMPS AND COMPRESSORS
EN ISO 10438-2:2007 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 2: Special-purpose oil systems (ISO 10438-2:2007)
PIP PCECV001 : 2016 GUIDELINES FOR APPLICATION OF CONTROL VALVES
DEFSTAN 02-348/2(2008) : 2008 GUIDE TO THE DESIGN, CORROSION ASSESSMENT AND STRESS ANALYSIS OF STEAM SYSTEMS PIPEWORK
API 16D CHINESE : 2004 SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT
API 611 : 2008 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
EN ISO 13628-1:2005/A1:2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
API 16C CHINESE : 1993 SPECIFICATION FOR CHOKE AND KILL SYSTEMS
NACE SP 02 86 : 2007 ELECTRICAL ISOLATION OF CATHODICALLY PROTECTED PIPELINES
API 16ST:2009 COILED TUBING WELL CONTROL EQUIPMENT SYSTEMS
API 577 : 2013 WELDING PROCESSES, INSPECTION, AND METALLURGY
API 625 : 2010 TANK SYSTEMS FOR REFRIGERATED LIQUEFIED GAS STORAGE
API 682 : 2014 PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
API 7K CHINESE : 2010 DRILLING AND WELL SERVICING EQUIPMENT
API 591 : 2014 PROCESS VALVE QUALIFICATION PROCEDURE
API 17V : 2015 RECOMMENDED PRACTICE FOR ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR SUBSEA APPLICATIONS
API 582 : 2016 WELDING GUIDELINES FOR THE CHEMICAL, OIL, AND GAS INDUSTRIES
API 64 RUSSIAN : 2001 RECOMMENDED PRACTICE FOR DIVERTER SYSTEMS EQUIPMENT AND OPERATIONS
API STD 600 : 2015 STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS
API 574 CHINESE : 2009 INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS
API 677 : 2006 : R2016 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
API 682 CHINESE : 2014 PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
API 674 : 2010 : INC : ERR 1 : 2015 : R2016 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
API 5LD : 2017 CRA CLAD OR LINED STEEL PIPE
API 2001 : 2012 FIRE PROTECTION IN REFINERIES
API STD 17F : 2017 SUBSEA PRODUCTION CONTROL SYSTEMS
EN ISO 13628-4:2010/AC:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT
EN ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009)
EN ISO 13705:2012 Petroleum, petrochemical and natural gas industries - Fired heaters for general refinery service (ISO 13705:2012)
AWS D10.10/D10.10M : 1999 RECOMMENDED PRACTICES FOR LOCAL HEATING OF WELDS IN PIPING AND TUBING
AWS B2.4 : 2012 SPECIFICATION FOR WELDING PROCEDURE AND PERFORMANCE QUALIFICATION FOR THERMOPLASTICS
NFPA 560 : 2007 STORAGE, HANDLING, AND USE OF ETHYLENE OXIDE FOR STERILIZATION AND FUMIGATION
CEN ISO/TS 24817:2011 Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO/TS 24817:2006)
NFPA 50A : 1999 GASEOUS HYDROGEN SYSTEMS AT CONSUMER SITES
EN ISO 14692-3:2017 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2017)
ANSI/CSA FC 1:2014 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
API 6D :2015 SPECIFICATION FOR PIPELINE AND PIPING VALVES
ASHRAE HDBK REFRIGERATION : 2014 ASHRAE HANDBOOK - REFRIGERATION
API MPM CH5.8 : 2011 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 5.8: MEASUREMENT OF LIQUID HYDROCARBONS BY ULTRASONIC FLOW METERS
AWS B5.15 : 2010 SPECIFICATION FOR THE QUALIFICATION OF RADIOGRAPHIC INTERPRETERS
CEN/TR 14549:2004 Guide to the use of ISO 15649 and ANSI/ASME B31.3 for piping in Europe in compliance with the Pressure Equipment Directive
CSA/ANSI NGV 4.1-2018 Natural gas vehicle (NGV) dispensing systems
UNI EN ISO 13704 : 2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES
EN ISO 15551-1:2015 Petroleum and natural gas industries - Drilling and production equipment - Part 1: Electric submersible pump systems for artificial lift (ISO 15551-1:2015)
API RP 14C : 2017 ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR OFFSHORE PRODUCTION FACILITIES
API std 602 : 2015 GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES
CSA HGV 4.1 : 2013 STANDARD FOR HYDROGEN DISPENSING SYSTEMS
API SPEC 17E : 2017 SPECIFICATION FOR SUBSEA UMBILICALS
API 574 : 2016 INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS
API 674 : 2010 : ERR 2 : 2015 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
AWS B5.4 : 2005 SPECIFICATION FOR THE QUALIFICATION OF WELDER TEST FACILITIES
NACE SP 04 72 : 2015 METHODS AND CONTROLS TO PREVENT IN-SERVICE ENVIRONMENTAL CRACKING OF CARBON STEEL WELDMENTS IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS
API 674 : 2010 : ERR 1 : 2014 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
API 2510 : 2001 : R2011 DESIGN AND CONSTRUCTION OF LPG INSTALLATIONS
EN ISO 10438-4:2007 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 4: Self-acting gas seal support systems (ISO 10438-4:2007)
EN ISO 10437:2003 Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications (ISO 10437:2003)
EEMUA 182 : 2004 SPECIFICATION FOR INTEGRAL BLOCK AND BLEED VALVE MANIFOLDS FOR DIRECT CONNECTION TO PIPEWORK
API 590 : 1985 STEEL LINE BLANKS
API 591 RUSSIAN : 2008 PROCESS VALVE QUALIFICATION PROCEDURE
EEMUA 185 : 2011 GUIDE FOR HOT TAPPING ON PIPING AND OTHER EQUIPMENT
NFPA 53 : 2016 MATERIALS, EQUIPMENT, AND SYSTEMS USED IN OXYGEN-ENRICHED ATMOSPHERES
API 4783 : 2016 WATER MANAGEMENT AND STEWARDSHIP IN MIDSTREAM, DOWNSTREAM, AND DELIVERY OPERATIONS IN THE OIL AND GAS INDUSTRY
MSS SP 97 : 2012 INTEGRALLY REINFORCED FORGED BRANCH OUTLET FITTINGS - SOCKET WELDING, THREADED, AND BUTTWELDING ENDS
NFPA 400 : 2016 HAZARDOUS MATERIALS CODE
API 551 : 2016 PROCESS MEASUREMENT
NFPA 664 : 2017 PREVENTION OF FIRES AND EXPLOSIONS IN WOOD PROCESSING AND WOODWORKING FACILITIES
API 610 : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
API 609 CHINESE : 2009 BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE
ACI 350 : 2006 CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY
EN ISO 21049:2004 Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004)
ACI 350M : 2006 METRIC CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY
MSS SP 69 : 2003 PIPE HANGERS AND SUPPORTS - SELECTION AND APPLICATION
EN ISO 13628-6:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems (ISO 13628-6:2006)
API 609 : 2016 BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE
API 537 : 2017 FLARE DETAILS FOR PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES
CSA HGV 4.6 : 2013 MANUALLY OPERATED VALVES FOR USE IN GASEOUS HYDROGEN VEHICLE FUELING STATIONS
EN ISO 25457:2008 Petroleum, petrochemical and natural gas industries - Flare details for general refinery and petrochemical service (ISO 25457:2008)
API RP 2201 : 2003 SAFE HOT TAPPING PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES
UNE-ISO 16110-1:2015 Hydrogen generators using fuel processing technologies -- Part 1: Safety
MSS SP 130 : 2013 BELLOWS SEALS FOR INSTRUMENT VALVES
BS EN 14870-3:2006 Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Flanges
API 611 : 2008 : R2014 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
EN ISO 27509:2012/AC:2013 PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING (ISO 27509:2012/COR 1:2013)
API 16D RUSSIAN : 2004 SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT
API 945:2003 AVOIDING ENVIRONMENTAL CRACKING IN AMINE UNITS
API 2610 : 2005 : R2010 DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES
API 618 : 2007 : R2016 RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API 537 CHINESE : 2008 FLARE DETAILS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE
NACE SP 01 14 : 2014 REFINERY INJECTION AND PROCESS MIX POINTS
API TR 17TR8 : 2018 HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES
EN ISO 13703:2000/AC:2007 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND INSTALLATION OF PIPING SYSTEMS ON OFFSHORE PRODUCTION PLATFORMS
MSS SP 105 : 2016 INSTRUMENT VALVES FOR CODE APPLICATIONS
CSA HGV 4.9 : 2016 HYDROGEN FUELING STATIONS
ACI 376 : 2011 CODE REQUIREMENTS FOR DESIGN AND CONSTRUCTION OF CONCRETE STRUCTURES FOR THE CONTAINMENT OF REFRIGERATED LIQUEFIED GASES AND COMMENTARY
ASME PTB 2 : 2009 GUIDE TO LIFE CYCLE MANAGEMENT OF PRESSURE EQUIPMENT INTEGRITY
EN ISO 10438-3:2007 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 3: General-purpose oil systems (ISO 10438-3:2007)
API 15LE : 2008 : R2013 SPECIFICATION FOR POLYETHYLENE LINE PIPE (PE)
API 7K : 2015+ERR 2:2016 DRILLING AND WELL SERVICING EQUIPMENT
API 520-2 : 2015 SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 2: INSTALLATION
ASME FFS 1 : 2007 FITNESS-FOR-SERVICE
API TR 1PER15K-1 : 2013 PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT
API 17P : 2013 DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA STRUCTURES AND MANIFOLDS
MSS SP 95 : 2014 SWAGE(D) NIPPLES AND BULL PLUGS
EEMUA 184 : 2009 GUIDE TO THE ISOLATION OF PRESSURE RELIEVING DEVICES
EEMUA 208 : 2010 GUIDE TO LIFE-CYCLE MANAGEMENT OF PRESSURE RELIEF SYSTEMS
EEMUA 211 : 2016 GUIDANCE ON THE SPECIFICATION OF PRESSURE VESSELS
API TR 17TR10 : 2015 SUBSEA UMBILICAL TERMINATION (SUT) DESIGN RECOMMENDATIONS
API 599 : 2013 METAL PLUG VALVES - FLANGED, THREADED, AND WELDING ENDS
API 681 : 1996 LIQUID RING VACUUM PUMPS AND COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
EN ISO 17945:2015 Petroleum, petrochemical and natural gas industries - Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments (ISO 17945:2015)
API 7K : 2015 DRILLING AND WELL SERVICING EQUIPMENT
API 340 : 1997 LIQUID RELEASE PREVENTION AND DETECTION MEASURES FOR ABOVEGROUND STORAGE FACILITIES
NFPA 67 : 2016 GUIDE ON EXPLOSION PROTECTION FOR GASEOUS MIXTURES IN PIPE SYSTEMS
API 2RD : 2013 DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS
NFPA 99 : 2018 HEALTH CARE FACILITIES CODE
API 17O : 2014 SUBSEA HIGH INTEGRITY PRESSURE PROTECTION SYSTEMS (HIPPS)
API 751 : 2013 SAFE OPERATION OF HYDROFLUORIC ACID ALKYLATION UNITS
API 5LD CHINESE : 2009 SPECIFICATION FOR CRA CLAD OR LINED STEEL PIPE
NFPA 5000 : 2018 BUILDING CONSTRUCTION AND SAFETY CODE
API 570 CHINESE : 2009 PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS
NORSOK M 630 : REV 6 MATERIAL DATA SHEETS AND ELEMENT DATA SHEETS FOR PIPING
API PUBL 2510A : 1996 FIRE-PROTECTION CONSIDERATIONS FOR THE DESIGN AND OPERATION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE FACILITIES
BS ISO 18647:2017 Petroleum and natural gas industries. Modular drilling rigs for offshore fixed platforms
AWS D10.7M/D10.7 : 2008 GUIDE FOR THE GAS SHIELDED ARC WELDING OF ALUMINUM AND ALUMINUM ALLOY PIPE
API 681 : 1996 : R2010 LIQUID RING VACUUM PUMPS AND COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API 676 CHINESE : 2009 POSITIVE DISPLACEMENT PUMPS - ROTARY
API STD 612:2020 Petroleum, Petrochemical, and Natural Gas Industries - Steam Turbines - Special-purpose Applications
API 16D : 2004 : R2013 SPECIFICATION FOR CONTROL SYSTEMS FOR DRILLING WELL CONTROL EQUIPMENT AND CONTROL SYSTEMS FOR DIVERTER EQUIPMENT
EI 1594 : 2014 INITIAL PRESSURE STRENGTH TESTING OF AIRPORT FUEL HYDRANT SYSTEMS WITH WATER
BS ISO 22734-2:2011 Hydrogen generators using water electrolysis process Residential applications
API 16ST : 2009 : R2014 COILED TUBING WELL CONTROL EQUIPMENT SYSTEMS
API 15LE CHINESE : 2008 SPECIFICATION FOR POLYETHYLENE LINE PIPE (PE)
API 673 : 2014 CENTRIFUGAL FANS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API 932B : 2012 DESIGN, MATERIALS, FABRICATION, OPERATION, AND INSPECTION GUIDELINES FOR CORROSION CONTROL IN HYDROPROCESSING REACTOR EFFLUENT AIR COOLER (REAC) SYSTEMS
API RP 14E : 1991 RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS
API STD 676 : 2009 POSITIVE DISPLACEMENT PUMPS - ROTARY
NFPA 50B : 1999 LIQUEFIED HYDROGEN SYSTEMS AT CONSUMER SITES
NFPA 51A : 2012 ACETYLENE CYLINDER CHARGING PLANTS
EN ISO 13628-5:2009 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals (ISO 13628-5:2009)
EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004)
EN ISO 10439-1:2015 Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 1: General requirements (ISO 10439-1:2015)
EN ISO 10440-2:2001 Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001)
ACI 376M : 2011 CODE REQUIREMENTS FOR DESIGN AND CONSTRUCTION OF CONCRETE STRUCTURES FOR THE CONTAINMENT OF REFRIGERATED LIQUEFIED GASES (METRIC)
API 2201 : 2003 : R2010 SAFE HOT TAPPING PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES
DEFSTAN 02-772/1(2007) : 2007 WELDING AND FABRICATION OF PIPEWORK, MACHINERY AND ENGINEERING COMPONENTS FOR HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS
API 546 : 2008 BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER
EEMUA 234 : 2016 90/10 COPPER NICKEL ALLOY PIPING FOR OFFSHORE APPLICATIONS (SPECIFICATION)
API MPM CH5.8 SPANISH : 2011 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 5.8: MEASUREMENT OF LIQUID HYDROCARBONS BY ULTRASONIC FLOW METERS
API 618 : 2007 RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
EN ISO 10438-1:2007 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-1:2007)
API 603 : 2013 CORROSION-RESISTANT, BOLTED BONNET GATE VALVES - FLANGED AND BUTT-WELDING ENDS
API 614 : 2008 LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES
API 577 CHINESE : 2013 WELDING PROCESSES, INSPECTION AND METALLURGY
EN ISO 13535:2000 Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment (ISO 13535:2000)
CSA FC 3 : 2004 PORTABLE FUEL CELL POWER SYSTEMS
NFPA 37 : 2018 INSTALLATION AND USE OF STATIONARY COMBUSTION ENGINES AND GAS TURBINES
NFPA 45 : 2015 FIRE PROTECTION FOR LABORATORIES USING CHEMICALS
API 675 : 2012 POSITIVE DISPLACEMENT PUMPS - CONTROLLED VOLUME FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
AWS C5.10/C5.10M : 2003 RECOMMENDED PRACTICES FOR SHIELDING GASES FOR WELDING AND CUTTING
API 15LE : 2008(R2018) SPECIFICATION FOR POLYETHYLENE LINE PIPE (PE)
NFPA 650 : 1998 PNEUMATIC CONVEYING SYSTEMS FOR HANDLING COMBUSTIBLE PARTICULATE SOLIDS
API 520-1 : 2014 SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 1: SIZING AND SELECTION
API 2A LRFD : 1993 RECOMMENDED PRACTICE FOR PLANNING, DESIGNING AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - LOAD AND RESISTANCE FACTOR DESIGN
EN ISO 13704:2007/AC:2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES
API 2510 : 2001 DESIGN AND CONSTRUCTION OF LPG INSTALLATIONS
API 14E : 1991 : R2013 RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS
MSS SP 134 : 2012 VALVES FOR CRYOGENIC SERVICE, INCLUDING REQUIREMENTS FOR BODY/BONNET EXTENSIONS
UL 60335-2-72:1ED 2017-09 Household and Similar Electrical Appliances - Safety - Part 2-72: Particular Requirements for Floor Treatment Machines With or Without Traction Drive, for Commercial Use
NACE 5A171 : 2007 MATERIALS FOR STORING AND HANDLING COMMERCIAL GRADES OF AQUEOUS HYDROFLUORIC ACID AND ANHYDROUS HYDROGEN FLUORIDE
API 560 : 2016 FIRED HEATERS FOR GENERAL REFINERY SERVICE
NFPA 86C : 1999 INDUSTRIAL FURNACES USING A SPECIAL PROCESSING ATMOSPHERE
SAE J 2343 : 2018 RECOMMENDED PRACTICE FOR LNG MEDIUM AND HEAVY-DUTY POWERED VEHICLES
API 530 : 2015 CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES
EN ISO 10440-1:2007 Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors (ISO 10440-1:2007)
EEMUA 192 : 1998 GUIDE FOR THE PROCUREMENT OF VALVES FOR LOW TEMPERATURE (NON-CRYOGENIC) SERVICE
EEMUA 207 : 2009 DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION
API 537:2017+ADD 1:2020 FLARE DETAILS FOR PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES
API 605 : 4ED 88 LARGE-DIAMETER CARBON STEEL FLANGES (NOMINAL PIPE SIZES 26 THROUGH 60; CLASSES 75, 150, 300, 400, 600 AND 900)
MSS SP 58 : 2009 PIPE HANGERS AND SUPPORTS - MATERIALS, DESIGN, MANUFACTURE, SELECTION, APPLICATION, AND INSTALLATION
API 599 RUSSIAN : 2013 METAL PLUG VALVES - FLANGED, THREADED AND WELDING ENDS
API 2510A : 1996 : R2015 FIRE-PROTECTION CONSIDERATIONS FOR THE DESIGN AND OPERATION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE FACILITIES
ASME BPE : 2016 BIOPROCESSING EQUIPMENT
MSS SP 141 : 2012 MULTI-TURN AND CHECK VALVE MODIFICATIONS
API SPEC 16C : 2015 CHOKE AND KILL EQUIPMENT
API 8C : 2012 DRILLING AND PRODUCTION HOISTING EQUIPMENT (PSL 1 AND PSL 2)
API 64 : 2017-08 DIVERTER EQUIPMENT SYSTEMS
EN ISO 10961:2012 Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection (ISO 10961:2010)
I.S. EN ISO 25457:2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FLARE DETAILS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE
NFPA 69 : 2014 EXPLOSION PREVENTION SYSTEMS
BS EN ISO 17945:2015 Petroleum, petrochemical and natural gas industries. Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments
ASME B31.1 : 2016 POWER PIPING
ASTM F 2014 : 2000 : R2019 Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications
ASME PCC 1 : 2013 GUIDELINES FOR PRESSURE BOUNDARY BOLTED FLANGE JOINT ASSEMBLY
ISO 28921-2:2015 Industrial valves Isolating valves for low-temperature applications Part 2: Type testing
CSA Z341 SERIES : 2014 STORAGE OF HYDROCARBONS IN UNDERGROUND FORMATIONS
CSA B836 : 2014 STORAGE, HANDLING, AND DISPENSING OF AVIATION FUELS AT AERODROMES
ISO 13628-1:2005 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations
NFPA 55 : 2016 COMPRESSED GASES AND CRYOGENIC FLUIDS CODE
CSA B139 : 2015 INSTALLATION CODE FOR OIL-BURNING EQUIPMENT
ISO 22734-2:2011 Hydrogen generators using water electrolysis process Part 2: Residential applications
API 521 : 2014 PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS
IEC 62282-4-101:2014 Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks
ASTM A 813/A813M : 2014-11 SPECIFICATION FOR SINGLE- OR DOUBLE-WELDED AUSTENITIC STAINLESS STEEL PIPE
DIN EN ISO 28921-2:2017-05 INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 2: TYPE TESTING (ISO 28921-2:2015)
ASTM F 2015 : 2000 Standard Specification for Lap Joint Flange Pipe End Applications
ISO 10961:2010 Gas cylinders Cylinder bundles Design, manufacture, testing and inspection
ASTM F 2015 : 2000 : R2006 Standard Specification for Lap Joint Flange Pipe End Applications
UNE-EN ISO 28921-2:2018 Industrial valves - Isolating valves for low-temperature applications - Part 2: Type testing (ISO 28921-2:2015)
BS EN ISO 25457:2008 Petroleum, petrochemical and natural gas industries. Flare details for general refinery and petrochemical service
PD CEN/TR 14549:2004 Guide to the use of ISO 15649 and ANSI/ASME B31.3 for piping in Europe in compliance with the Pressure Equipment Directive
EN ISO 23251:2007/A1:2008 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS
ISO 10438-1:2007 Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 1: General requirements
ASTM F 1949 : 1999 : R2013 Standard Specification for Medical Oxygen Delivery Systems for EMS Ground Vehicles (Withdrawn 2022)
PD 8010-2:2004 Code of practice for pipelines Subsea pipelines
BS ISO 13577-3:2016 Industrial furnaces and associated processing equipment. Safety Generation and use of protective and reactive atmosphere gases
BS ISO 16110-1:2007 Hydrogen generators using fuel processing technologies Safety
BS 7993:2011 Twin ferrule connectors and associated tubing for 316 stainless steel systems. Specification and test methods
BS 5908:1980 Code of practice for fire precautions in chemical plant
ASTM F 2014 : 2000 Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications
ISO 10440-2:2001 Petroleum and natural gas industries Rotary-type positive-displacement compressors Part 2: Packaged air compressors (oil-free)
BS 1560-3.1:1989 Circular flanges for pipes, valves and fittings (Class designated). Steel, cast iron and copper alloy flanges Specification for steel flanges
PD ISO/TR 17177:2015 Petroleum and natural gas industries. Guidelines for the marine interfaces of hybrid LNG terminals
BS EN ISO 10442:2002 Petroleum, chemical and gas service industries. Packaged, integrally geared centrifugal air compressors
NFPA 56 : 2017 FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS
BS ISO 22734-1:2008 Hydrogen generators using water electrolysis process Industrial and commercial applications
ISO 18647:2017 Petroleum and natural gas industries — Modular drilling rigs for offshore fixed platforms
NFPA 1 : 2018 FIRE CODE
ISO 27509:2012 Petroleum and natural gas industries Compact flanged connections with IX seal ring
BS ISO 10790:2015 Measurement of fluid flow in closed conduits. Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements)
BS EN 16125:2015 LPG Equipment and Accessories. Pipework systems and supports. LPG in liquid phase and vapour pressure phase
BS 7159:1989 Code of practice for design and construction of glass-reinforced plastics (GRP) piping systems for individual plants or sites
BS EN ISO 23251 : 2007 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS
ISO 13574:2015 Industrial furnaces and associated processing equipment — Vocabulary
VDI 3842:2004-06 Vibrations in piping systems
ISO 10442:2002 Petroleum, chemical and gas service industries Packaged, integrally geared centrifugal air compressors
API 12GDU : 1990 SPECIFICATION FOR GLYCOL-TYPE GAS DEHYDRATION UNITS
ISO 16111:2008 Transportable gas storage devices Hydrogen absorbed in reversible metal hydride
ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries
DIN EN ISO 17945:2015-08 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015)
ASTM F 2014 : 2000 : R2006 Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications
ISO 10439-1:2015 Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 1: General requirements
BS ISO 16111:2008 Transportable gas storage devices. Hydrogen absorbed in reversible metal hydride
BS EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps
BS 1600:1991 Specification for dimensions of steel pipe for the petroleum industry
CAN/CSA-Z662-15 Oil and gas pipeline systems
DIN EN 16125:2016-03 LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE
NFPA 59A : 2016 PRODUCTION, STORAGE, AND HANDLING OF LIQUEFIED NATURAL GAS (LNG)
BS EN ISO 13709:2003 Centrifugal pumps for petroleum, petrochemical and natural gas industries
BS EN ISO 13705:2012 Petroleum, petrochemical and natural gas industries. Fired heaters for general refinery service
ISO 13577-3:2016 Industrial furnaces and associated processing equipment Safety Part 3: Generation and use of protective and reactive atmosphere gases
ISO 13628-5:2009 Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals
ASTM F 1949 : 1999 Standard Specification for Medical Oxygen Delivery Systems for EMS Ground Vehicles
ISO 10440-1:2007 Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors
ASTM A 1091/A1091M : 2016 Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High Temperature Service
BS EN ISO 10440-1:2001 Petroleum and natural gas industries. Rotary-type positive-displacement compressors Process compressors (oil-free)
B341-15 UN pressure receptacles and multiple-element gas containers for the transport of dangerous goods
ANSI/CSA HGV 4.8-2012 (R2018) Hydrogen gas vehicle fueling station compressor guidelines
ASTM A 1091/A1091M : 2016 : EDT 1 Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High Temperature Service
ISO 10436:1993 Petroleum and natural gas industries — General-purpose steam turbines for refinery service
ISO 21049:2004 Pumps Shaft sealing systems for centrifugal and rotary pumps
ISO 13577-2:2014 Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems
NFPA 85 : 2015 BOILER AND COMBUSTION SYSTEMS HAZARDS CODE
NFPA 2 : 2016 HYDROGEN TECHNOLOGIES CODE
NASA-STD-8719.17C:2017 NASA REQUIREMENTS FOR GROUND-BASED PRESSURE VESSELS AND PRESSURIZED SYSTEMS (PVS)
ISO 15551-1:2015 Petroleum and natural gas industries — Drilling and production equipment — Part 1: Electric submersible pump systems for artificial lift
ISO 13535:2000 Petroleum and natural gas industries Drilling and production equipment Hoisting equipment
API RP 17R : 2015 RECOMMENDED PRACTICE FOR FLOWLINE CONNECTORS AND JUMPERS
ISO 15590-3:2004 Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 3: Flanges
BS EN 62282-4-101:2014 Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks
ISO 14224:2016 Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment
API 14E CHINESE : 2007 RECOMMENDED PRACTICE FOR DESIGN AND INSTALLATION OF OFFSHORE PRODUCTION PLATFORM PIPING SYSTEMS
ISO 14692-3:2017 Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design
NFPA 87 : 2018 FLUID HEATERS
ISO 28921-1:2013 Industrial valves Isolating valves for low-temperature applications Part 1: Design, manufacturing and production testing
ISO 13628-15:2011 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 15: Subsea structures and manifolds
ISO 16110-1:2007 Hydrogen generators using fuel processing technologies Part 1: Safety
NFPA 1 : 2021 FIRE CODE
BS EN ISO 13703 : 2001 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND INSTALLATION OF PIPING SYSTEMS ON OFFSHORE PRODUCTION PLATFORMS
BS EN ISO 13628-5:2009 Petroleum and natural gas industries. Design and operation of subsea production systems Subsea umbilicals
I.S. EN ISO 13704:2007 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES
BS EN ISO 15551-1:2015 Petroleum and natural gas industries. Drilling and production equipment Electric submersible pump systems for artificial lift
UNE-EN 16125:2016 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
ANSI/ASSE Z117.1 : 2009 SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES
BS 5908-1:2012 Fire and explosion precautions at premises handling flammable gases, liquids and dusts Code of practice for precautions against fire and explosion in chemical plants, chemical storage and similar premises
BS EN ISO 10438-4:2003 Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries Self-acting gas seal support systems
NFPA 484 : 2015 COMBUSTIBLE METALS
UFC 3-460-01 : Change 3 UNIFIED FACILITIES CRITERIA - DESIGN: PETROLEUM FUEL FACILITIES
NACE SP 04 03 : 2015 AVOIDING CAUSTIC STRESS CORROSION CRACKING OF REFINERY EQUIPMENT AND PIPING
BS 8010-3:1993 Code of practice for pipelines Pipelines subsea: design, construction and installation
BS EN ISO 10437:2003 Petroleum, petrochemical and natural gas industries. Steam turbines. Special-purpose applications
CSA B836:14 (R2019) Storage, handling, and dispensing of aviation fuels at aerodromes
BS ISO 13577-2:2014 Industrial furnaces and associated processing equipment. Safety Combustion and fuel handling systems
BS PD8010-1(2015) : 2015 PIPELINE SYSTEMS - PART 1: STEEL PIPELINES ON LAND - CODE OF PRACTICE
BS EN ISO 27509:2012 Petroleum and natural gas industries. Compact flanged connections with IX seal ring
ISO 23251:2006 Petroleum, petrochemical and natural gas industries Pressure-relieving and depressuring systems
BS ISO 10816-8:2014 Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts Reciprocating compressor systems
ISO/TR 17177:2015 Petroleum and natural gas industries Guidelines for the marine interfaces of hybrid LNG terminals
BS EN ISO 10438-2:2003 Petroleum and natural gas industries. Lubrication, shaft sealing and control oil systems and auxiliaries Special purpose oil systems
BS EN ISO 28921-2:2017 Industrial valves. Isolating valves for low-temperature applications Type testing
ISO 24817:2017 Petroleum, petrochemical and natural gas industries — Composite repairs for pipework — Qualification and design, installation, testing and inspection
PD 8010-1:2004 Code of practice for pipelines Steel pipelines on land
ISO 10437:2003 Petroleum, petrochemical and natural gas industries — Steam turbines — Special-purpose applications
ISO 10438-3:2007 Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 3: General-purpose oil systems
ISO 13710:2004 Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps
DIN EN ISO 28921-1:2017-05 Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013)
NFPA 407 : 2017 AIRCRAFT FUEL SERVICING
B622-14 (R2019) Selection and use of highway tanks, TC portable tanks, and ton containers for the transportation of dangerous goods, Class 2
ISO 10790:2015 Measurement of fluid flow in closed conduits Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements)
ASME PCC 2 : 2015 REPAIR OF PRESSURE EQUIPMENT AND PIPING
BS EN ISO 10440-2:2001 Petroleum and natural gas industries. Rotary-type positive-displacement compressors Packaged air compressors (oil-free)
ISO 17945:2015 Petroleum, petrochemical and natural gas industries Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments
BS EN ISO 13535:2001 Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment Hoisting equipment
ISO 15649:2001 Petroleum and natural gas industries — Piping
ISO 10816-8:2014 Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 8: Reciprocating compressor systems
ISO 13628-6:2006 Petroleum and natural gas industries Design and operation of subsea production systems Part 6: Subsea production control systems
I.S. EN ISO 28921-1:2017 INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING (ISO 28921-1:2013)
ISO/TS 24817:2006 Petroleum, petrochemical and natural gas industries Composite repairs for pipework Qualification and design, installation, testing and inspection
API SPEC 16F : 2017 SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT
API 1169 : 2013 RECOMMENDED PRACTICE FOR BASIC INSPECTION REQUIREMENTS - NEW PIPELINE CONSTRUCTION
CSA HGV 4.4 : 2013(R2018) STANDARD FOR BREAKAWAY DEVICES FOR COMPRESSED HYDROGEN DISPENSING HOSES AND SYSTEMS
ASME B31.8 : 2016 Gas Transmission and Distribution Piping Systems
ISO 13704:2007 Petroleum, petrochemical and natural gas industries — Calculation of heater-tube thickness in petroleum refineries
BS ISO 19859:2016 Gas turbine applications. Requirements for power generation
BS EN ISO 13628-6:2006 Petroleum and natural gas industries. Design and operation of subsea production systems Subsea production control systems
BS EN ISO 21049:2004 Pumps. Shaft sealing systems for centrifugal and rotary pumps
BS EN ISO 13628-15:2011 Petroleum and natural gas industries. Design and operation of subsea production systems Subsea structures and manifolds
UNE-EN ISO 28921-1:2018 Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013)
ISO 13628-3:2000 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 3: Through flowline (TFL) systems
BS EN ISO 28921-1:2017 Industrial valves. Isolating valves for low-temperature applications Design, manufacturing and production testing
BS EN ISO 10438-3:2003 Petroleum, petrochemical and natural gas industries. Lubrication, shaft sealing and control oil systems and auxilliaries General-purpose oil systems
ISO 13703:2000 Petroleum and natural gas industries Design and installation of piping systems on offshore production platforms
CAN/CSA-Z767-17 Process safety management
ASTM F 2014 : 2000 : R2013 Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications
BS 8010-2.8:1992 Code of practice for pipelines. Pipelines on land: design, construction and installation Steel for oil and gas
BS EN ISO 10961:2012 Gas cylinders. Cylinder bundles. Design, manufacture, testing and inspection
BS EN ISO 10438-1:2003 Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries General requirements
Z276-18 Liquefied natural gas (LNG) - Production, storage, and handling
NACE RP 04 72 : 2005 METHODS AND CONTROLS TO PREVENT IN-SERVICE ENVIRONMENTAL CRACKING OF CARBON STEEL WELDMENTS IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS
NASA STD 8719.24 : 2011 NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS
ISO 13631:2002 Petroleum and natural gas industries Packaged reciprocating gas compressors
ISO 19859:2016 Gas turbine applications Requirements for power generation
BS ISO 15649:2001 Petroleum and natural gas industries. Piping
BS EN ISO 14692-3:2017 Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping System design
ISO 13705:2012 Petroleum, petrochemical and natural gas industries — Fired heaters for general refinery service
ASTM F 1323 : 2014 : REDLINE Standard Specification for Shipboard Incinerators
DIN EN ISO 10961:2012-06 GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION (ISO 10961:2010)
ASTM F 1949 : 1999 : R2007 Standard Specification for Medical Oxygen Delivery Systems for EMS Ground Vehicles
BS EN ISO 13631:2002 Petroleum and natural gas industries. Packaged reciprocating gas compressors
BS EN ISO 13628-3:2001 Petroleum and natural gas industries. Design and operation of subsea production systems Through flowline (TFL) systems
BS EN ISO 10439-1:2015 Petroleum, petrochemical and natural gas industries. Axial and centrifugal compressors and expander-compressors General requirements
CSA B51 : 2014 BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE
CSA LNG 2-2017 LIQUEFIED NATURAL GAS VEHICLE FUEL CONTAINERS
ISO 10438-2:2007 Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 2: Special-purpose oil systems
DIN ISO 10816-8:2014-11 MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 8: RECIPROCATING COMPRESSOR SYSTEMS (ISO 10816-8:2014)
CSA Z1006 : 2016 MANAGEMENT OF WORK IN CONFINED SPACES
CSA Z1006:16 (R2020) Management of work in confined spaces
BS EN ISO 13704:2007 Petroleum, petrochemical and natural gas industries. Calculation of heater-tube thickness in petroleum refineries
ASTM F 2015 : 2000 : R2013 Standard Specification for Lap Joint Flange Pipe End Applications
API SPEC 12K : 2008 SPECIFICATION FOR INDIRECT TYPE OILFIELD HEATERS
PD 8010-2:2015+A1:2016 Pipeline systems Subsea pipelines. Code of practice
API 621 : 2010 RECONDITIONING OF METALLIC GATE, GLOBE, AND CHECK VALVES
BS EN ISO 14224:2016 Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment
ISO 10438-4:2007 Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 4: Self-acting gas seal support systems
BS ISO 13704:2001 Petroleum and natural gas industries. Calculation of heater-tube thickness in petroleum refineries
ISO 22734-1:2008 Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications
PIP PCSIP001 : 2015 INSTRUMENT TUBING MATERIAL SPECIFICATION
PD 6438:1969 A review of present methods for design of bolted flanges for pressure vessels
API 536 : 2017 POST-COMBUSTION NO[X] CONTROL FOR FIRED EQUIPMENT IN GENERAL REFINERY AND PETROCHEMICAL SERVICES
BS ISO 13628-5:2002 Petroleum and natural gas industries. Design and operation of subsea production systems Subsea umbilicals
BS EN ISO 13628-1 : 2005 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
BS EN ISO 13628-4:1999 Petroleum and natural gas industries. Design and operation of subsea production systems Subsea wellhead and tree equipment
ISO 25457:2008 Petroleum, petrochemical and natural gas industries — Flare details for general refinery and petrochemical service
ASTM B 834 : 2017 : REDLINE Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367), Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625), Nickel-Chromium-Iron Alloys (UNS N06600 and N06690), and Nickel-Chromium-Iron-Columbium-Molybdenum (UNS N07718) Alloy Pipe Flanges, Fittings, Valves, and Parts
DD CEN ISO/TS 24817:2011 Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection
IEC PAS 62282-6-1:2006 Fuel cell technologies - Part 6-1: Micro fuel cell power systems - Safety
BS EN ISO 24817:2017 Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection
UNE-ISO 22734-1:2012 Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications
BS PD8010-2(2015) : 2015 PIPELINE SYSTEMS - PART 2: SUBSEA PIPELINES - CODE OF PRACTICE
CAN/CSA-C22.2 NO. 60335-2-72:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE, FOR COMMERCIAL USE
ISO 13628-4:2010 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment
API 610 REDLINE : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
ASME B16.47 : 2017 LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD
API 17F REDLINE : 2006 SPECIFICATION FOR SUBSEA PRODUCTION CONTROL SYSTEMS
API 537 REDLINE : 2008 FLARE DETAILS FOR GENERAL REFINERY AND PETROCHEMICAL SERVICE
API 621 REDLINE : 2010 RECONDITIONING OF METALLIC GATE, GLOBE, AND CHECK VALVES
API 620 REDLINE : 2008 DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS
PIP PNC00005 : 2016 DESIGN OF ASME B31.3 - METALLIC PIPING SYSTEMS
API 619 REDLINE : 2010 ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
API 5LD REDLINE : 2009 SPECIFICATION FOR CRA CLAD OR LINED STEEL PIPE
ASME STP-PT-025 : 0 EXTENDED FATIGUE EXEMPTION RULES FOR LOW CR ALLOYS INTO THE TIME-DEPENDENT RANGE FOR SECTION 8 DIVISION 2 CONSTRUCTION
API 7K REDLINE : 2010 DRILLING AND WELL SERVICING EQUIPMENT
API 616 REDLINE : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API TR 938-C REDLINE : 2011 USE OF DUPLEX STAINLESS STEELS IN THE OIL REFINING INDUSTRY
API 578 REDLINE : 2010 MATERIAL VERIFICATION PROGRAM FOR NEW AND EXISTING ALLOY PIPING SYSTEMS
API 674 REDLINE : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
API 2T REDLINE : 2010 PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS
ASME STP-PT-003 : 2005 HYDROGEN STANDARDIZATION INTERIM REPORT FOR TANKS, PIPING, AND PIPELINES
API 602 REDLINE : 2009 STEEL GATE, GLOBE, AND CHECK VALVES FOR SIZES NPS 4 (DN 100) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES
PIP RESE001 : 2017 GENERAL PURPOSE SKID-MOUNTED PACKAGED EQUIPMENT SPECIFICATION
ASME STP-PT-005 : 2006 DESIGN FACTOR GUIDELINES FOR HIGH-PRESSURE COMPOSITE HYDROGEN TANKS
API 609 REDLINE : 2009 BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE
API 570 REDLINE : 2009 PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS
API RP 2T : 2010 PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS
PIP PHSMV029 : 2017 HYGIENIC STAINLESS STEEL OTHER VALVE DESCRIPTIONS
UNE-EN 16125:2020 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
API 608 REDLINE : 2008 METAL BALL VALVES - FLANGED, THREADED AND WELDING ENDS
API 680 : 1ED 87 PACKAGED RECIPROCATING PLANT AND INSTRUMENT AIR COMPRESSORS FOR GENERAL REFINERY SERVICES
API 5C7 : 1996 : R2007 RECOMMENDED PRACTICE FOR COILED TUBING OPERATIONS IN OIL AND GAS WELL SERVICES
API 614 REDLINE : 2008 LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES
API 17C : 2002 : R2010 RECOMMENDED PRACTICE ON TFL (THROUGH FLOWLINE) SYSTEMS
API 941 REDLINE : 2008 STEELS FOR HYDROGEN SERVICE AT ELEVATED TEMPERATURES AND PRESSURES IN PETROLEUM REFINERIES AND PETROCHEMICAL PLANTS
I.S. EN ISO 15551-1:2015 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: ELECTRIC SUBMERSIBLE PUMP SYSTEMS FOR ARTIFICIAL LIFT (ISO 15551-1:2015)
PIP PHSMV027 : 2017 HYGIENIC STAINLESS STEEL BUTTERFLY VALVE DESCRIPTIONS
API 53 RUSSIAN : 1997 : R2004 RECOMMENDED PRACTICES FOR BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS
API 17D REDLINE : 2011 DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT
API 676 REDLINE : 2009 POSITIVE DISPLACEMENT PUMPS - ROTARY
API 582 REDLINE : 2009 WELDING GUIDELINES FOR THE CHEMICAL, OIL, AND GAS INDUSTRIES
PIP PNE00012 : 2017 PIPING EXAMINATION AND LEAK TEST GUIDE
PIP PNE00004 : 2016 STEAM TRAP GUIDELINES
API 5C7:1996 RECOMMENDED PRACTICE FOR COILED TUBING OPERATIONS IN OIL AND GAS WELL SERVICES
API 55 : 1995 : R2007 RECOMMENDED PRACTICE FOR OIL AND GAS PRODUCING AND GAS PROCESSING PLANT OPERATIONS INVOLVING HYDROGEN SULFIDE
ASME STP-PT-024 : 2008 DEVELOPMENT OF BASIC TIME-DEPENDENT ALLOWABLE STRESSES FOR CREEP REGIME IN SECTION 8, DIVISION 1
12/30250727 DC BS EN ISO 13628-6 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 6: SUBSEA PRODUCTION CONTROL SYSTEMS
ASME B31.12 : 2014 HYDROGEN PIPING AND PIPELINES
BS ISO 13574:2015 Industrial furnaces and associated processing equipment. Vocabulary
ASME PTC19.3 TW : 2016 THERMOWELLS
API 2T : 2010 : R2015 PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS
API 591 REDLINE : 2008 PROCESS VALVE QUALIFICATION PROCEDURE
API 530 REDLINE : 2008 CALCULATION OF HEATER-TUBE THICKNESS IN PETROLEUM REFINERIES
API Std 53 RUSSIAN:1997 RECOMMENDED PRACTICES FOR BLOWOUT PREVENTION EQUIPMENT SYSTEMS FOR DRILLING WELLS
API 611 REDLINE : 2008 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API 574 REDLINE : 2009 INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS
API 17E REDLINE : 2010 SPECIFICATION FOR SUBSEA UMBILICALS
API 16C RUSSIAN : 1993 SPECIFICATION FOR CHOKE AND KILL SYSTEMS
API 17 C : 2002 RECOMMENDED PRACTICE ON TFL (THROUGH FLOWLINE) SYSTEMS
API 55 :1995 RECOMMENDED PRACTICE FOR OIL AND GAS PRODUCING AND GAS PROCESSING PLANT OPERATIONS INVOLVING HYDROGEN SULFIDE
API 55 : 1995 : R2013 RECOMMENDED PRACTICE FOR OIL AND GAS PRODUCING AND GAS PROCESSING PLANT OPERATIONS INVOLVING HYDROGEN SULFIDE

ASTM A 1010/A1010M : 2013-10 SPECIFICATION FOR HIGHER-STRENGTH MARTENSITIC STAINLESS STEEL PLATE, SHEET, AND STRIP
MSS SP 122 : 2012 PLASTIC INDUSTRIAL BALL VALVES
AWS A5.14/A5.14M : 2011 SPECIFICATION FOR NICKEL AND NICKEL-ALLOY BARE WELDING ELECTRODES AND RODS
ISO 15649:2001 Petroleum and natural gas industries — Piping
ASME B18.2.1 : 2012 SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES)
AWWA C606 : 2015 GROOVED AND SHOULDERED JOINTS
AWS A5.31 : 1992 SPECIFICATION FOR FLUXES FOR BRAZING AND BRAZE WELDING
ASQ Q9000 3:1997 Quality Management And Quality Assurance Standards - Part 3: Guidelines For The Application Of Ansi/Iso/Asqc Q9001-1994 To The Development, Supply, Installation And Maintenance Of Computer Software
MSS SP 70 : 2011 GRAY IRON GATE VALVES, FLANGED AND THREADED ENDS
ASTM D 2467 : 2015 : REDLINE Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
PFI ES 48 : 0 RANDOM EXAMINATION
ASTM A 353/A353M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9 % Nickel
AWWA C207 : 2013 STEEL PIPE FLANGES FOR WATERWORKS SERVICE, SIZES 4 IN. THROUGH 144 IN. (100 MM THROUGH 3,600 MM)
ASTM E 446 : 2015 : REDLINE Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
ASTM D 3517 : 2014 : REDLINE Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
ASTM E 186 : 2015 : REDLINE Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings
ASTM A 995/A995M : 2013 Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
ASTM F 1412 : 2016 : REDLINE Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
ASTM D 4024 : 2015 : REDLINE Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
PFI ES 7 : 0 MINIMUM LENGTH AND SPACING FOR WELDED NOZZLES
ASTM F 439 : 2013 : REDLINE Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
MSS SP 6 : 2017 STANDARD FINISHES FOR CONTACT FACES OF PIPE FLANGES AND CONNECTING-END FLANGES OF VALVES AND FITTINGS
ASTM A 47/A47M : 1999 Standard Specification for Ferritic Malleable Iron Castings
ASTM A 376/A376M : 2017 : REDLINE Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service
ASTM B 409 : 2006 Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
ASTM D 6041 : 2011 Standard Specification for Contact-Molded <span class='unicode'>“</span>Fiberglass<span class='unicode'>”</span> (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings
ASTM B 265 : 2015 : REDLINE Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
AISC 325 : 2017 STEEL CONSTRUCTION MANUAL
SAE J 518 : 2013 HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, FOUR-BOLT SPLIT FLANGE TYPE
ASTM A 537/A537M : 2013 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
AWS A5.5/A5.5M : 2014 SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING
NACE SP 01 70 : 2012 PROTECTION OF AUSTENITIC STAINLESS STEELS AND OTHER AUSTENITIC ALLOYS FROM POLYTHIONIC ACID STRESS CORROSION CRACKING DURING A SHUTDOWN OF REFINERY EQUIPMENT
ASTM F 493 : 2014 : REDLINE Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
AWWA C500 : 2009 METAL-SEATED GATE VALVES FOR WATER SUPPLY SERVICE
ASTM B 335 : 2003 Standard Specification for Nickel-Molybdenum Alloy Rod
ASTM F 438 : 2017 : REDLINE Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
ASTM A 204/A204M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
ASTM B 467 : 2014 : REDLINE Standard Specification for Welded Copper-Nickel Pipe
ASTM B 96/B96M : 2016 : REDLINE Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
NFPA 1963 : 2014 FIRE HOSE CONNECTIONS
ASTM A 181/A181M : 2014 : REDLINE Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
ASTM A 299/A299M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
ANSI/AWWA C115/A21.15 : 2011 FLANGED DUCTILE-IRON PIPE WITH DUCTILE-IRON OR GRAY-IRON THREADED FLANGES
ASTM D 3840 : 2014 : REDLINE SPECIFICATION FOR 'FIBERGLASS' (GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) PIPE FITTINGS FOR NONPRESSURE APPLICATIONS
MSS SP 83 : 2014 CLASS 3000 AND 6000 PIPE UNIONS, SOCKET WELDING AND THREADED (CARBON STEEL, ALLOY STEEL, STAINLESS STEELS, AND NICKEL ALLOYS)
ASTM F 441/F441M : 2015 : REDLINE Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
AWS A5.22 : 1995 SPECIFICATION FOR STAINLESS STEEL ELECTRODES FOR FLUX CORED ARC WELDING AND STAINLESS STEEL FLUX CORED RODS FOR GAS TUNGSTEN ARC WELDING
ASTM A 395/A395M : 1999 Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
ANSI/AWWA C200 : 2017 STEEL WATER PIPE, 6 IN. (150 MM) AND LARGER
ASTM A 409/A409M : 2015 : REDLINE Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
API 609 : 2016 BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE
ASTM A 694/A694M : 2016 : REDLINE Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
ASTM B 466/B 466M : 2014-05 SPECIFICATION FOR SEAMLESS COPPER-NICKEL PIPE AND TUBE
ASME B16.10 : 2017 FACE-TO-FACE AND END-TO-END DIMENSIONS OF VALVES
ASTM D 2996 : 2017 : REDLINE Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM A 553/A553M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 7, 8, and 9 % Nickel
ANSI/AWWA C950:2013 FIBERGLASS PRESSURE PIPE
ASME PCC 1 : 2013 GUIDELINES FOR PRESSURE BOUNDARY BOLTED FLANGE JOINT ASSEMBLY
ASME B16.11 : 2016 FORGED FITTINGS, SOCKET-WELDING AND THREADED
ASME PCC 2 : 2015 REPAIR OF PRESSURE EQUIPMENT AND PIPING
ASTM A 516/A516M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
ASTM E 114 : 2015 : REDLINE Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing
MSS SP 80 : 2013 BRONZE GATE, GLOBE, ANGLE, AND CHECK VALVES
ASTM A 358/A358M : 2015 : REDLINE Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
ASME B16.42 : 2016 DUCTILE IRON PIPE FLANGES AND FLANGED FITTINGS - CLASSES 150 AND 300
AWWA C151/A21.51 : 2017 DUCTILE-IRON PIPE, CENTRIFUGALLY CAST
ASTM B 464/B464M : 2015 : REDLINE Standard Specification for Welded UNS N08020 Alloy Pipe
ASME BPE : 2016 BIOPROCESSING EQUIPMENT
ASTM D 2464 : 2015 : REDLINE Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
ASTM D 1527 : 1999 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80
API std 602 : 2015 GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES
ASME A13.1 : 2015 SCHEME FOR THE IDENTIFICATION OF PIPING SYSTEMS
ASTM D 5421 : 2015 : REDLINE Standard Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
ASTM E 155 : 2015 : REDLINE Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
ASTM F 1282 : 2017 : REDLINE Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
MSS SP 72 : 2010 BALL VALVES WITH FLANGED OR BUTT-WELDING ENDS FOR GENERAL SERVICE
AWWA C208 : 2012 DIMENSIONS FOR FABRICATED STEEL WATER PIPE FITTINGS
AWWA C150/A21.50 : 2014 THICKNESS DESIGN OF DUCTILE-IRON PIPE
ASTM B 221 : 2014 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
ASME B46.1 : 2009 SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
API STD 600 : 2015 STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS
PFI ES 24 : 2013 PIPE BENDING METHODS, TOLERANCES, PROCESS AND MATERIAL REQUIREMENTS
SAE J 513 : 1999 REFRIGERATION TUBE FITTINGS - GENERAL SPECIFICATIONS
ASTM B 161 : 2005 : EDT 1 Standard Specification for Nickel Seamless Pipe and Tube
ASTM B 169/B169M : 2015 : REDLINE Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar
ASTM D 3000 : 1995 : REV A : EDT 1 Standard Specification for Polybutylene (PB) Plastic Pipe (SDR-PR) Based on Outside Diameter (Withdrawn 2003)
ASME B16.20 : 2012 METALLIC GASKETS FOR PIPE FLANGES
MSS SP 97 : 2012 INTEGRALLY REINFORCED FORGED BRANCH OUTLET FITTINGS - SOCKET WELDING, THREADED, AND BUTTWELDING ENDS
API 5L : 2012 LINE PIPE
ASTM A 813/A813M : 2014-11 SPECIFICATION FOR SINGLE- OR DOUBLE-WELDED AUSTENITIC STAINLESS STEEL PIPE
ASTM D 3839 : 2014 : REDLINE Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe
ANSI/AWWA C300 : 2016 REINFORCED CONCRETE PRESSURE PIPE, STEEL - CYLINDER TYPE
MSS SP 78 : 2011 GRAY IRON PLUG VALVES, FLANGED AND THREADED ENDS
ASTM D 2855 : 2015 : REDLINE Standard Practice for the Two-Step (Primer and Solvent Cement) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets
ASTM D 3309 : 1996 : REV A : R2002 Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems (Withdrawn 2010)
ASTM A 437/A437M : 2015 : REDLINE Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service
AWWA C504 : 2015 RUBBER-SEATED BUTTERFLY VALVES
MSS SP 81 : 2017 STAINLESS-STEEL OR STAINLESS-STEEL-LINED, BONNETLESS, KNIFE GATE VALVES WITH FLANGED ENDS
ASME B16.18 : 2012 Cast Copper Alloy Solder Joint Pressure Fittings (B16.18 - 2012)<br>
MSS SP 42 : 2013 CORROSION-RESISTANT GATE, GLOBE, ANGLE, AND CHECK VALVES WITH FLANGED AND BUTT WELD ENDS (CLASSES 150, 300, & 600)
NACE SP 04 72 : 2015 METHODS AND CONTROLS TO PREVENT IN-SERVICE ENVIRONMENTAL CRACKING OF CARBON STEEL WELDMENTS IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS
ASTM A 420/A420M : 2016 : REDLINE Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
ASTM D 2672 : 2014 : REDLINE Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement
AWS A5.1M/A5.1 : 2012 SPECIFICATION FOR CARBON STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING
ASTM D 2683 : 2014 : REDLINE Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
ASME B1.20.1 : 2013(R2018) PIPE THREADS, GENERAL PURPOSE (INCH)
ASTM A 563 : 2015 : REDLINE Standard Specification for Carbon and Alloy Steel Nuts
ASTM D 2513 : 2017-01 SPECIFICATION FOR POLYETHYLENE (PE) GAS PRESSURE PIPE, TUBING, AND FITTINGS
MSS SP 25 : 2013 STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS
MSS SP 51 : 2012 CLASS 150LW CORROSION RESISTANT FLANGES AND CAST FLANGED FITTINGS
AWS A5.11/A5.11M : 2010 SPECIFICATION FOR NICKEL AND NICKEL-ALLOY WELDING ELECTRODES FOR SHIELDED METAL ARC WELDING
ASTM F 714 : 2013 : REDLINE Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
API 608 : 2012 METAL BALL VALVES - FLANGED, THREADED, AND WELDING ENDS
ASTM F 1281 : 2017 : REDLINE Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
MSS SP 65 : 2012 HIGH PRESSURE CHEMICAL INDUSTRY FLANGES AND THREADED STUBS FOR USE WITH LENS GASKETS
ASTM A 928/A928M : 2014 : REDLINE Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
AWWA C302 : 2016 REINFORCED CONCRETE PRESSURE PIPE, NONCYLINDER TYPE
API 15LR : 2001 SPECIFICATION FOR LOW PRESSURE FIBERGLASS LINE PIPE
ASTM B 152/B152M : 2013 : REDLINE Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar
ASTM B 88 : 2016 : REDLINE Standard Specification for Seamless Copper Water Tube
API 599 : 2013 METAL PLUG VALVES - FLANGED, THREADED, AND WELDING ENDS
ASTM B 61 : 2015 : REDLINE Standard Specification for Steam or Valve Bronze Castings
ASCE 7 10 : 2010 MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES
AWS QC1 : 2007 STANDARD FOR AWS CERTIFICATION OF WELDING INSPECTORS
API 941 : 2016 STEELS FOR HYDROGEN SERVICE AT ELEVATED TEMPERATURES AND PRESSURES IN PETROLEUM REFINERIES AND PETROCHEMICAL PLANTS
MSS SP 53 : 2012 QUALITY STANDARD FOR STEEL CASTINGS AND FORGINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - MAGNETIC PARTICLE EXAMINATION METHOD
ASTM D 2466 : 2017 : REDLINE Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
AWWA C111/A21.11 : 2017 RUBBER-GASKET JOINTS FOR DUCTILE-IRON PRESSURE PIPE AND FITTINGS
ASME B36.10M : 2015 WELDED AND SEAMLESS WROUGHT STEEL PIPE
AWS A5.4/A5.4M : 2012 SPECIFICATION FOR STAINLESS STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING
SAE J 514 : 2012 HYDRAULIC TUBE FITTINGS
AWWA C110/A21.10 : 2012 DUCTILE-IRON AND GRAY-IRON FITTINGS
ASTM B 160 : 2005 : EDT 1 Standard Specification for Nickel Rod and Bar
ASTM A 453/A453M : 2017 : REDLINE Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
ASTM D 2241 : 2015 : REDLINE Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
ASTM D 2468 : 1996 : REV A Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40 (Withdrawn 2003)
CSA Z245.1 : 2014 STEEL PIPE
ASTM A 217/A217M : 2014 : REDLINE Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
MSS SP 119 : 2010 FACTORY-MADE WROUGHT BELLED END PIPE FITTINGS FOR SOCKET-WELDING
ASTM B 209 : 2014 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
AWWA C301 : 2014 PRESTRESSED CONCRETE PRESSURE PIPE, STEEL-CYLINDER TYPE
MSS SP 95 : 2014 SWAGE(D) NIPPLES AND BULL PLUGS
MSS SP 93 : 2014 QUALITY STANDARD FOR STEEL CASTINGS AND FORGINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - LIQUID PENETRANT EXAMINATION METHOD
MSS SP 44 : 2016 STEEL PIPELINE FLANGES
API 6D :2015 SPECIFICATION FOR PIPELINE AND PIPING VALVES
ASTM A 105/A105M : 2014-11 SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING APPLICATIONS
ASTM E 125 : 1963 : R2003 Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings
ASME B16.5 : 2017 PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD
AWS A5.9/A5.9M : 2012 SPECIFICATION FOR BARE STAINLESS STEEL WELDING ELECTRODES AND RODS
ASME B16.21 : 2016 NONMETALLIC FLAT GASKETS FOR PIPE FLANGES
ASTM E 272 : 2015 : REDLINE Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings
ASME B16.34 : 2017 VALVES - FLANGED, THREADED, AND WELDING END
ASTM F 1055 : 2016-09 SPECIFICATION FOR ELECTROFUSION TYPE POLYETHYLENE FITTINGS FOR OUTSIDE DIAMETER CONTROLLED POLYETHYLENE AND CROSSLINKED POLYETHYLENE (PEX) PIPE AND TUBING
MSS SP 106 : 2012 CAST COPPER ALLOY FLANGES AND FLANGED FITTINGS: CLASS 125, 150, AND 300
ASTM E 280 : 2015 : REDLINE Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings
ASTM B 43 : 2015 : REDLINE Standard Specification for Seamless Red Brass Pipe, Standard Sizes
ASTM A 139/A139M : 2016 : REDLINE Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
ASTM A 530/A530M : 2012-06 SPECIFICATION FOR GENERAL REQUIREMENTS FOR SPECIALIZED CARBON AND ALLOY STEEL PIPE
MSS SP 55 : 2011 QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - VISUAL METHOD FOR EVALUATION OF SURFACE IRREGULARITIES
ASME B16.4 : 2016 GRAY IRON THREADED FITTINGS: CLASSES 125 AND 250
ASME PTC19.3 TW : 2016 THERMOWELLS
MSS SP 71 : 2011 GRAY IRON SWING CHECK VALVES, FLANGED AND THREADED ENDS
ASME B18.2.2 : 2015 NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES)
MSS SP 75 : 2014 HIGH-STRENGTH, WROUGHT, BUTT-WELDING FITTINGS
ASME B16.50 : 2013 WROUGHT COPPER AND COPPER ALLOY BRAZE-JOINT PRESSURE FITTINGS
API 603 : 2013 CORROSION-RESISTANT, BOLTED BONNET GATE VALVES - FLANGED AND BUTT-WELDING ENDS
ASME B16.9 : 2012 FACTORY-MADE WROUGHT BUTTWELDING FITTINGS
MSS SP 9 : 2013 SPOT FACING FOR BRONZE, IRON AND STEEL FLANGES
MSS SP 88 : 2015 DIAPHRAGM VALVES
ASTM A 672/A672M : 2014 : REDLINE Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
ASTM B 241/B241M : 2016 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
NFPA 54 : 2018 NATIONAL FUEL GAS CODE
ASTM E 709 : 2015 : REDLINE Standard Guide for Magnetic Particle Testing
ASTM E 310 : 2015 : REDLINE Standard Reference Radiographs for Tin Bronze Castings
ASTM A 276/A276M : 2017 : REDLINE Standard Specification for Stainless Steel Bars and Shapes
ASTM B21/B 21M : 2014-10 SPECIFICATION FOR NAVAL BRASS ROD, BAR, AND SHAPES
ASTM C 599 : 1991 : R1995 : EDT 1 Standard Specification for Conical Process Glass Pipe and Fittings (Withdrawn 2002)
MSS SP 85 : 2011 GRAY IRON GLOBE & ANGLE VALVES, FLANGED AND THREADED ENDS
API 594 : 2017 CHECK VALVES: FLANGED, LUG, WAFER, AND BUTT-WELDING
ASTM A 515/A515M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
ASTM B 62 : 2017 : REDLINE Standard Specification for Composition Bronze or Ounce Metal Castings
ASTM A 312/A312M : 2017-03 SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES
ASTM A 203/A203M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
ASTM A 524 : 1996 Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
ASME B16.47 : 2017 LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD
ASTM B 247 : 2015 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
ASTM B 381 : 2013 : REDLINE SPECIFICATION FOR TITANIUM AND TITANIUM ALLOY FORGINGS
ASTM F 437 : 2015 : REDLINE Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
ASTM D 3754 : 2014 : REDLINE Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
CGA G 4.1 : 2009 CLEANING EQUIPMENT FOR OXYGEN SERVICE
MSS SP 79 : 2011 SOCKET WELDING REDUCER INSERTS
ASTM D 2992 : 2012 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
ANSI Z223.1 : 2018 NATIONAL FUEL GAS CODE
ASTM D 2997 : 2015 : REDLINE Standard Specification for Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D 3035 : 2015 : REDLINE Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
CEN/TR 14549:2004 Guide to the use of ISO 15649 and ANSI/ASME B31.3 for piping in Europe in compliance with the Pressure Equipment Directive
ASME B16.22 : 2013 WROUGHT COPPER AND COPPER ALLOY SOLDER-JOINT PRESSURE FITTINGS
ASTM A 815/A815M : 2017 Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
AWWA C900 : 2016 POLYVINYL CHLORIDE (PVC) PRESSURE PIPE AND FABRICATED FITTINGS, 4 IN. THROUGH 60 IN. (100 MM THROUGH 1,500 MM)
ASTM D 2447 : 2003 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter (Withdrawn 2010)
MSS SP 43 : 2013 WROUGHT AND FABRICATED BUTT-WELDING FITTINGS FOR LOW PRESSURE, CORROSION RESISTANT APPLICATIONS
AWS A3.0M/A3.0 : 2010 STANDARD WELDING TERMS AND DEFINITIONS INCLUDING TERMS FOR ADHESIVE BONDING, BRAZING, SOLDERING, THERMAL CUTTING, AND THERMAL SPRAYING
MSS SP 58 : 2009 PIPE HANGERS AND SUPPORTS - MATERIALS, DESIGN, MANUFACTURE, SELECTION, APPLICATION, AND INSTALLATION
ASME B16.25 : 2012 BUTTWELDING ENDS
ASTM A 285/A285M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
MSS SP 105 : 2016 INSTRUMENT VALVES FOR CODE APPLICATIONS
AWS A5.8 : 1992 FILLER METALS FOR BRAZING AND BRAZE WELDING, SPECIFICATION FOR
ASME B16.48 : 2015 LINE BLANKS
ASTM A 302/A302M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
ASME B16.3 : 2016 MALLEABLE IRON THREADED FITTINGS: CLASSES 150 AND 300
ASTM B 333 : 2003 Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip

View more information
US$520.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.