Name: ASTM A 135/A135M : 2009 : R2014
Brand: ASTM
Price: 75.00 USD

ASTM A 135/A135M : 2009 : R2014

Superseded

View Superseded by

Standard Specification for Electric-Resistance-Welded Steel Pipe

Available format(s)

Hardcopy , PDF

Superseded date

05-13-2019

Language(s)

English

Published date

03-14-2014

Publisher

American Society for Testing and Materials

CONTAINED IN VOL. 01.01, 2017 Specifies two grades of electric resistance-welded steel pipe in NPS 2 to NPS 30 [DN 50 to DN 750] inclusive, with nominal (average) wall thickness up to 0.500 in. [12.70 mm], inclusive, and in nominal sizes NPS 3/4 to NPS 5 [DN 20 to DN 125] inclusive with nominal (average) wall thickness 0.083 in. [2.11 mm] to 0.134 in. [3.40 mm], depending on size.

1.1This specification² covers two grades of electric-resistance-welded steel pipe in NPS 2 to NPS 30 [DN 50 to DN 750] inclusive, with nominal (average) wall thickness up to 0.500 in. [12.70 mm], inclusive, and in nominal sizes NPS ³/₄to NPS 5 [DN 20 to DN 125] inclusive with nominal (average) wall thickness 0.083 in. [2.11 mm] to 0.134 in. [3.40 mm], depending on size. Pipe having other dimensions (Note 1) may be furnished provided such pipe complies with all other requirements of this specification. The pipe is intended for conveying gas, vapor, water or other liquid; only Grade A is adapted for flanging and bending (Note 2). The suitability of pipe for various purposes is somewhat dependent upon its dimensions, properties, and conditions of service, so that the purpose for which the pipe is intended should be stated in the order. The pipe may be furnished either nonexpanded or cold expanded at the option of the manufacturer. When pipe is cold expanded, the amount of expansion shall not exceed 1.5 % of the outside diameter pipe size.

Note 1—A comprehensive listing of standardized pipe dimensions is contained in ASME B36.10M.

Note 2—This provision is not intended to prohibit the cold bending of Grade B pipe.

1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

Committee	A 01
DevelopmentNote	Supersedes ASTM A 135. (04/2006)
DocumentType	Standard
Pages	9
ProductNote	Reconfirmed 2014
PublisherName	American Society for Testing and Materials
Status	Superseded
SupersededBy	ASTM A 135/A135M : 2019
Supersedes	ASTM A 135/A135M : 2006 ASTM A 135/A135M : 2009

MIL-STD-129 Revision R:2014	Military Marking for Shipment and Storage
ASTM E 309 : 2016 : REDLINE	Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation
ASTM E 273 : 2015 : REDLINE	Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing
ASME B1.20.1 : 2013(R2018)	PIPE THREADS, GENERAL PURPOSE (INCH)
FED-STD-123 Revision H:2007	MARKING FOR SHIPMENT (CIVIL AGENCIES)
ASME B36.10M : 2015	WELDED AND SEAMLESS WROUGHT STEEL PIPE
ASTM A 700 : 2014	Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment
FED-STD-183 Revision C:1980	CONTINUOUS IDENTIFICATION MARKING OF IRON AND STEEL PRODUCTS
ASTM A 865 : 2003	Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints