• There are no items in your cart

ASTM A 453/A453M : 2017 : REDLINE

Current
Current

The latest, up-to-date edition.

Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
Available format(s)

PDF

Language(s)

English

Published date

05-12-2017

CONTAINED IN VOL. 01.01, 2017 Defines five grades of bolting with twelve classes of yield strength ranging from 50 to 120 ksi [345 to 827 MPa] for use in high-temperature service such as fasteners for pressure vessel and valve flanges.

1.1This specification2 covers five grades of bolting materials with twelve classes of yield strength ranging from 50 to 120 ksi [345 to 827 MPa] for use in high-temperature service for bolting components, such as bolts, screws, nuts, or studs, for pressure vessel and valve flanges. See Specification A962/A962M for the definition of bolting. The material requires special processing and is not intended for general purpose applications.

1.2The following referenced general requirements are indispensable for application of this specification: Specification A962/A962M.

1.3Supplementary Requirements are provided for use at the option of the purchaser. The Supplementary Requirements shall only apply when specified individually by the purchaser in the purchase order or contract.

1.4This specification is expressed in both inch-pound units and in SI units; however, unless the purchase order or contract specifies the applicable “M” specification designation (SI units), the inch-pound units shall apply.

1.5The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
A 01
DevelopmentNote
Supersedes ASTM A 453. (09/2001)
DocumentType
Redline
Pages
14
PublisherName
American Society for Testing and Materials
Status
Current

API 6A CHINESE : 2011 SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
ASME B16.34 : 2017 VALVES - FLANGED, THREADED, AND WELDING END
ASTM C 1725 : 2017 : REDLINE Standard Guide for Hot Cell Specialized Support Equipment and Tools
SAE J 2484 : 2012 FASTENER PART STANDARD - MACHINE SCREWS
SAE J 2656 : 2016 Fastener Part Standard - Hexagon Socket, Square Head, and Slotted Headless Set Screws - Inch Dimensioned<br>
ISO 13628-4:2010 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment
I.S. EN ISO 10423:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT
ASME B31.1 : 2016 POWER PIPING
NF EN ISO 10423 : 2013 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT
ASME B31.3:2016 PROCESS PIPING
API 16AR : 2017 STANDARD FOR REPAIR AND REMANUFACTURE OF DRILL-THROUGH EQUIPMENT
API 6RS : 1ED 90 SUPP 1 BULLETIN ON REFERENCED STANDARDS FOR COMMITTEE 6, STANDARDIZATION OF VALVES AND WELLHEAD EQUIPMENT
API 6A : 2010 SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
SAE J 2295 : 2016 FASTENER PART STANDARD - CAP SCREWS, HEX, HEAVY HEX AND HEAVY HEX STRUCTURAL BOLTS, AND HEX NUTS (INCH DIMENSIONED)
API 17D REDLINE : 2011 DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT
EN ISO 13628-4:2010/AC:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT
BS EN ISO 10423:2009 Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment CD-ROM
ISO 10423:2009 Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment
EN ISO 10423:2009 Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (ISO 10423:2009)
API 6A REDLINE : 2010 SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
API 16A : 2017 SPECIFICATION FOR DRILL-THROUGH EQUIPMENT
SAE J 2485 : 2012 FASTENER PART STANDARD - MACHINE SCREW NUTS (METRIC AND INCH)
API 16A : 2017 : INC : ERR 1+ERR2+ADD1 : 2018 SPECIFICATION FOR DRILL-THROUGH EQUIPMENT
BS EN ISO 13628-4:1999 Petroleum and natural gas industries. Design and operation of subsea production systems Subsea wellhead and tree equipment
ASME B18.31.2 : 2014 CONTINUOUS THREAD STUD, DOUBLE-END STUD, AND FLANGE BOLTING STUD (STUD BOLT) (INCH SERIES)

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.