• There are no items in your cart

ASTM A 672/A672M : 2014 : REDLINE

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
Available format(s)

PDF

Superseded date

08-27-2020

Language(s)

English

Published date

05-01-2014

CONTAINED IN VOL. 01.01, 2017 Defines steel pipe: electric-fusion-welded with filler metal added, fabricated from pressure-vessel quality plate of any of several analyses and strength levels and suitable for high-pressure service at moderate temperatures.

1.1This specification2 covers steel pipe: electric-fusion-welded with filler metal added, fabricated from pressure-vessel quality plate of any of several analyses and strength levels and suitable for high-pressure service at moderate temperatures. Heat treatment may or may not be required to attain the desired properties or to comply with applicable code requirements. Supplementary requirements are provided for use when additional testing or examination is desired.

1.2The specification nominally covers pipe 16 in. [400 mm] in outside diameter or larger with wall thicknesses up to 3 in. [75 mm], inclusive. Pipe having other dimensions may be furnished provided it complies with all other requirements of this specification.

1.3Several grades and classes of pipe are provided.

1.3.1Gradedesignates the type of plate used.

1.3.2Classdesignates the type of heat treatment performed during manufacture of the pipe, whether the weld is radiographically examined, and whether the pipe has been pressure tested as listed in 1.3.3.

1.3.3Class designations are as follows (Note 1):

Class

Heat Treatment on Pipe

Radiography,
see Section

Pressure Test,
see Section


10

none

none

none

11

none

9

none

12

none

9

8.3

13

none

none

8.3

20

stress relieved, see 5.3.1

none

none

21

stress relieved, see 5.3.1

9

none

22

stress relieved, see 5.3.1

9

8.3

23

stress relieved, see 5.3.1

none

8.3

30

normalized, see 5.3.2

none

none

31

normalized, see 5.3.2

9

none

32

normalized, see 5.3.2

9

8.3

33

normalized, see 5.3.2

none

8.3

40

normalized and tempered, see 5.3.3

none

none

41

normalized and tempered, see 5.3.3

9

none

42

normalized and tempered, see 5.3.3

9

8.3

43

normalized and tempered, see 5.3.3

none

8.3

50

quenched and tempered, see 5.3.4

none

none

51

quenched and tempered, see 5.3.4

9

none

52

quenched and tempered, see 5.3.4

9

8.3

53

quenched and tempered, see 5.3.4

none

8.3


Note 1Selection of materials should be made with attention to temperature of service. For such guidance, Specification A20/A20M may be consulted.

1.4The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order.

Committee
A 01
DevelopmentNote
Supersedes ASTM A 672. (12/2009)
DocumentType
Redline
Pages
9
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy

ASME B31.8 : 2016 Gas Transmission and Distribution Piping Systems
ASME B31.3:2016 PROCESS PIPING
API 574 : 2016 INSPECTION PRACTICES FOR PIPING SYSTEM COMPONENTS
ASTM A 530/A530M : 2012-06 SPECIFICATION FOR GENERAL REQUIREMENTS FOR SPECIALIZED CARBON AND ALLOY STEEL PIPE

ASTM A 435/A435M : 2017 : REDLINE Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
ASTM A 577/A577M : 2017 : REDLINE Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
ASME PV CODE 9 : 2017 BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS
ASTM A 537/A537M : 2013 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
ASTM A 204/A204M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
ASTM A 299/A299M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
ASME PV CODE 2 SET : 2013 ASME BOILER AND PRESSURE VESSEL CODE (BPVC) - MATERIALS (SET)
ASTM A 516/A516M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
ASME PV CODE 3 SET : 2013 ASME BOILER AND PRESSURE VESSEL CODE (BPVC) - RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS (SET)
ASTM A 578/A578M : 2017 : REDLINE Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
ASTM E 110 : 2014 : REDLINE Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
ASTM A 533/A533M : 2016 : REDLINE Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
ASTM A 530/A530M : 2012-06 SPECIFICATION FOR GENERAL REQUIREMENTS FOR SPECIALIZED CARBON AND ALLOY STEEL PIPE
ASME PV CODE 8 SET : 2013 ASME BOILER AND PRESSURE VESSEL CODE (BPVC) - RULES FOR CONSTRUCTION OF PRESSURE VESSELS (SET)
ASTM E 709 : 2015 : REDLINE Standard Guide for Magnetic Particle Testing
ASTM A 515/A515M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
ASTM A 285/A285M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
ASTM A 302/A302M : 2017 : REDLINE Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.