• There are no items in your cart

ASTM B 174 : 2017 : REDLINE

Current
Current

The latest, up-to-date edition.

Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
Available format(s)

PDF

Language(s)

English

Published date

04-01-2017

CONTAINED IN VOL. 02.03, 2017 Defines bare bunch-stranded conductors made from round copper wires, either uncoated or coated with tin, lead or lead-alloy for use as electrical conductors.

1.1This specification covers bare bunch-stranded conductors made from round copper wires, either uncoated or coated with tin, lead, or lead-alloy for use as electrical conductors (Explanatory Note 1 and Explanatory Note 2).

1.2Coated wires shall include only those wires with finished diameters and densities substantially equal to the respective diameters and densities of uncoated wires.

1.3The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.3.1For conductor sizes designated by AWG or kcmil, the requirements in SI units have been numerically converted from corresponding values, stated or derived, in inch-pound units. For conductor sizes designated by SI units only, the requirements are stated or derived in SI units.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
B 01
DevelopmentNote
Supersedes ASTM B 158 (01/2002)
DocumentType
Redline
Pages
6
PublisherName
American Society for Testing and Materials
Status
Current

SAE J 2394 : 2017 SEVEN CONDUCTOR CABLE FOR ABS POWER - TRUCK AND BUS
IEEE 1242-1999 IEEE Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants
CSA C22.2 No. 239 : 2017 CONTROL AND INSTRUMENTATION CABLES
NFPA 79 : 2018 ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY
IEEE 837-2014 REDLINE IEEE Standard for Qualifying Permanent Connections Used in Substation Grounding
MIL-DTL-24643 Revision C:2009 Cables, Electric, Low Smoke, Halogen-Free, for Shipboard Use, General Specification for
CSA C68.10 : 2014 SHIELDED POWER CABLE FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS, 5-46 KV
MIL C 915 : F CABLE AND CORD ELECTRICAL, FOR SHIPBOARD USE GENERAL SPECIFICATIONS FOR
ASTM B 226 : 2011 Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors
SAE J 1494 : 2012 BATTERY BOOSTER CABLES
ASTM B 8 : 2011 : R2017 Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
WC 3-1992 RUBBER-INSULATED WIRE AND CABLE FOR THE TRANSMISSION AND DISTRIBUTION OF ELECTRICAL ENERGY
ASTM B 226 : 2011 : R2016 Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors
MIL C 24643 : A CABLES AND CORDS ELECTRIC, LOW SMOKE FOR SHIPBOARD USE, GENERAL SPECIFICATION FOR
MIL-DTL-915 Revision G:2002 Cable, Electrical, for Shipboard Use, General Specification for
SAE J 1654 : 2016 UNSHIELDED HIGH VOLTAGE PRIMARY CABLE
C22.2 NO. 188-18 Splicing wire connectors (Trinational standard with UL 486C and NXM-J- 548-ANCE)
CSA C22.2 NO No. 51:14 (R2018) ARMOURED CABLES
ASTM B 8 : 2011 Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
C22.2 NO. 75-17 Thermoplastic insulated wires and cables (Trinational standard with UL 83 and NMX-J-010-ANCE-2017)
DOD HDBK 270 : 0 METALLIC MATERIALS, MAGNETIC PERMEABILITY AND ELECTRICAL CONDUCTIVITY, CHARACTERISTICS OF (METRIC)
SAE J 1678 : 2015 LOW VOLTAGE ULTRA THIN WALL PRIMARY CABLE
QQ-W-343 Revision G:1997 WIRE, ELECTRICAL, COPPER (UNINSULATED)
SAE J 1067 : 2016 SEVEN CONDUCTOR CABLE - TRUCK AND BUS
CSA C22.2 No. 208 : 2014 FIRE ALARM AND SIGNAL CABLE
CSA C22.2 No. 210.2 : 2001 APPLIANCE WIRING MATERIAL PRODUCTS
C22.2 NO. 52-17 Underground secondary and service-entrance cables
UL 83:16ED 2017-07 Standard for Thermoplastic-Insulated Wires and Cables
SAE J 156 : 2016 FUSIBLE LINKS
A-A-59551 Revision A:2009 WIRE, ELECTRICAL, COPPER (UNINSULATED)
SAE J 2840 : 2017 HIGH VOLTAGE SHIELDED AND JACKETED CABLE
MIL-DTL-49285 Revision A:2008 CABLES, SPECIAL PURPOSE, ELECTRICAL, ALUMINUM FOIL SHIELDED PAIRS, TRIPLETS, OR QUADS, GENERAL SPECIFICATION FOR
SAE J 2742 : 2013 COMBINATION 11 CONDUCTORS AND 2 PAIRS ECBS CABLE
C22.2 NO. 96.2-18 Flexible power cables for wind turbine applications rated up to 35 kV
CSA C22.2 No. 210 : 2015 APPLIANCE WIRING MATERIAL PRODUCTS
C22.2 NO. 245-17 Marine shipboard cable
CSA C22.2 No. 65 : 2013 WIRE CONNECTORS
ASME NUM 1 : 2009 RULES FOR CONSTRUCTION OF CRANES, MONORAILS, AND HOISTS (WITH BRIDGE OR TROLLEY OR HOIST OF THE UNDERHUNG TYPE)

ASTM B 172 : 2017 : REDLINE Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
ASTM B 193 : 2016 : REDLINE Standard Test Method for Resistivity of Electrical Conductor Materials

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.