Name: ASTM B 827 : 2005 : R2014
Brand: ASTM
Price: 75.00 USD

ASTM B 827 : 2005 : R2014

Superseded

View Superseded by

Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests

Available format(s)

Hardcopy , PDF

Superseded date

08-27-2020

Language(s)

English

Published date

10-01-2014

Publisher

American Society for Testing and Materials

CONTAINED IN VOL. 02.04, 2015 Gives procedures for conducting environmental tests involving exposures to controlled quantities of corrosive gas mixtures.

1.1This practice provides procedures for conducting environmental tests involving exposures to controlled quantities of corrosive gas mixtures.

1.2This practice provides for the required equipment and methods for gas, temperature, and humidity control which enable tests to be conducted in a reproducible manner. Reproducibility is measured through the use of control coupons whose corrosion films are evaluated by mass gain, coulometry, or by various electron and X-ray beam analysis techniques. Reproducibility can also be measured by in situ corrosion rate monitors using electrical resistance or mass/frequency change methods.

1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use. See 5.1.2.4.

Committee	B 02
DocumentType	Standard Practice
Pages	9
ProductNote	Reconfirmed 2014
PublisherName	American Society for Testing and Materials
Status	Superseded
SupersededBy	ASTM B 827 : 2005 : R2020
Supersedes	ASTM B 827 : 2005 : R2009 : EDT 2

ASTM D 3824 : 1995 : R2000	Standard Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by the Chemiluminescent Method
ASTM E 902 : 2005	Standard Practice for Checking the Operating Characteristics of X-Ray Photoelectron Spectrometers (Withdrawn 2011)
ASTM D 3464 : 1996 : R2001	Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM D 2914 : 2001	Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method)
ASTM D 3464 : 1996	Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM D 4230 : 2002	Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
ASTM D 3609 : 2000 : R2014	Standard Practice for Calibration Techniques Using Permeation Tubes
ASTM D 1193 : 1977 : R1983 : EDT 1	Standard Specification for Reagent Water
ASTM D 3824 : 1995 : R2005	Standard Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by the Chemiluminescent Method
ASTM D 2914 : 2001 : R2007	Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method)
ASTM D 3824 : 2012 : REDLINE	Standard Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by the Chemiluminescent Method
ASTM B 845 : 1997	Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts
ASTM D 4230 : 2002 : R2007	Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
ASTM D 1193 : 2006 : R2011	Standard Specification for Reagent Water
ASTM D 4230 : 2002 : R2012	Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
ASTM B 542 : 2013 : REDLINE	Standard Terminology Relating to Electrical Contacts and Their Use
ASTM D 2914 : 1995	Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method)
ASTM D 3609 : 2000 : R2005	Standard Practice for Calibration Techniques Using Permeation Tubes
ASTM D 3464 : 1996 : R2007	Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM D 3609 : 2000 : R2010	Standard Practice for Calibration Techniques Using Permeation Tubes
ASTM D 1193 : 1991	Standard Specification for Reagent Water
ASTM D 3609 : 2000	Standard Practice for Calibration Techniques Using Permeation Tubes
ASTM B 765 : 2003 : R2018	Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings
ASTM D 4230 : 1983 : R1996 : EDT 1	Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
ASTM D 4230 : 2002 : EDT 1	Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
ASTM D 2914 : 2015	Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method)
ASTM D 3464 : 1996 : R2014	Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM D 1193 : 1970	Standard Specification For Reagent Water
ASTM D 2914 : 2015 : REDLINE	Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method)
ASTM D 1193 : 2006	Standard Specification for Reagent Water
ASTM D 1193 : 1999	Standard Specification for Reagent Water
ASTM D 3824 : 2012	Standard Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by the Chemiluminescent Method
ASTM D 1193 : 2006 : R2018	Standard Specification for Reagent Water
ASTM D 2912 : 1976 : R1983	Test Method for Oxidant Content of the Atmosphere (Neutral KI) (Withdrawn 1990)
ASTM D 4230 : 2020	Standard Test Method for Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer