ASTM C 1048 : 2018
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
10-01-2018
This specification covers the requirements for monolithic flat heat-strengthened and fully tempered coated and uncoated glass produced on a horizontal tempering system used in general building construction and other applications.
1.1This specification covers the requirements for monolithic flat heat-strengthened and fully tempered coated and uncoated glass produced on a horizontal tempering system used in general building construction and other applications.
1.2This specification does not address bent glass, or heat-strengthened or fully tempered glass manufactured on a vertical tempering system.
1.3The dimensional values stated in SI units are to be regarded as the standard. The units given in parentheses are for information only.
1.4The following safety hazards caveat pertains only to the test method portion, Section 10, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Committee |
C 14
|
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
| ASTM F 3006 : 2019 | Standard Specification for Ball Drop Impact Resistance of Laminated Architectural Flat Glazing |
| ASTM E 2136 : 2004 : R2013 | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability (Withdrawn 2022) |
| ASTM C 1464 : 2016 | Standard Specification for Bent Glass |
| ASTM E 3120 : 2017 | Standard Specification for Evaluating Accelerated Aging Performance of Environmentally Controlled Dynamic Glazings |
| ASTM C 1652/C1652M : 2014 | Standard Test Method for Measuring Optical Distortion in Flat Glass Products Using Digital Photography of Grids |
| ASTM F 3007 : 2019 | Standard Test Method for Ball Drop Impact Resistance of Laminated Architectural Flat Glass |
| ASTM F 2248 : 2019 | Standard Practice for Specifying an Equivalent 3-Second Duration Design Loading for Blast Resistant Glazing Fabricated with Laminated Glass |
| ASTM C 162 : 2005 : R2015 | Standard Terminology of<brk type="line"/> Glass and Glass Products |
| ASTM F 1882 : 2015 | Standard Specification for Residential Basketball Systems |
| ASTM C 1651 : 2011 : R2018 | Standard Test Method for Measurement of Roll Wave Optical Distortion in Heat-Treated Flat Glass |
| ASTM C 1172 : 2019 | Standard Specification for Laminated Architectural Flat Glass |
| ASTM E 772 : 2015 | Standard Terminology of Solar Energy Conversion |
| ASTM C 1349 : 2017 | Standard Specification for Architectural Flat Glass Clad Polycarbonate |
| ASTM C 1376 : 2015 | Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass |
| ASTM C 1443 : 1999 : R2016 | Standard Specification for Glasses, Portlight, Circular, Fully Tempered (Withdrawn 2021) |
| ASTM C 1401 : 2014 | Standard Guide for Structural Sealant Glazing |
| ASTM E 1300 : 2016 | Standard Practice for Determining Load Resistance of Glass in Buildings |
| ASTM E 2751/E2751M : 2017 : REV A | Standard Practice for Design and Performance of Supported Laminated Glass Walkways |
| ASTM C 1036 : 2001 | Standard Specification for Flat Glass |
| ASTM C 1376 : 2010 | Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass |
| ASTM C 346 : 1987 : R2018 | Standard Test Method for 45-deg Specular Gloss of Ceramic Materials (Withdrawn 2023) |
| ASTM C 1376 : 1997 | Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Glass |
| ASTM C 1279 : 1994 | Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass |
| ASTM C 1036 : 2021 | Standard Specification for Flat Glass |
| ASTM E 1300 : 2004 | Standard Practice for Determining Load Resistance of Glass in Buildings |
| ASTM C 1036 : 2006 | Standard Specification for Flat Glass |
| ASTM C 1279 : 2000 : EDT 1 | Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass |
| ASTM E 1300 : 2000 | Standard Practice for Determining Load Resistance of Glass in Buildings |
| ASTM C 1203 : 1991 : R2002 | Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel |
| ASTM C 1279 : 2000 | Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass |
| ASTM E 1300 : 2012 : REV A : EDT 1 | Standard Practice for Determining Load Resistance of Glass in Buildings |
| ASTM E 1300 : 2024 | Standard Practice for Determining Load Resistance of Glass in Buildings |
| ASTM C 1376 : 2003 | Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass |
| ASTM C 1279 : 2013 | Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass |
| ASTM C 1203 : 2004 : R2019 | Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel |
| ASTM C 1036 : 2016 | Standard Specification for Flat Glass |
| ASTM C 1279 : 2023 | Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass |
| ASTM C 1203 : 2004 : R2009 | Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel |
| ASTM C 1036 : 2011 | Standard Specification for Flat Glass |
| ASTM E 1300 : 2002 | Standard Practice for Determining Load Resistance of Glass in Buildings |
| ASTM E 1300 : 2009 | Standard Practice for Determining Load Resistance of Glass in Buildings |
| ASTM E 1300 : 2009 : REV A | Standard Practice for Determining Load Resistance of Glass in Buildings |
| ASTM E 1300 : 2012 : REV A | Standard Practice for Determining Load Resistance of Glass in Buildings |
| ASTM C 1376 : 2021 : REV A | Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass |
| ASTM E 1300 : 2003 | Standard Practice for Determining Load Resistance of Glass in Buildings |
| ASTM C 162 : 2023 | Standard Terminology of Glass and Glass Products |
| ASTM C 1203 : 2004 : R2014 | Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel |
| ASTM C 1376 : 2015 | Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass |
| ASTM C 1376 : 2021 | Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass |
| ASTM C 1279 : 2005 | Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass |
| ASTM C 1203 : 1991 : R1996 | Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel |
| ASTM C 1036 : 2011 : EDT 1 | Standard Specification for Flat Glass |
| ASTM C 1203 : 2004 | Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel |
| ASTM E 1300 : 2016 | Standard Practice for Determining Load Resistance of Glass in Buildings |
| ASTM E 1300 : 2004 : EDT 1 | Standard Practice for Determining Load Resistance of Glass in Buildings |
| ASTM E 1300 : 2012 | Standard Practice for Determining Load Resistance of Glass in Buildings |
| ASTM C 1036 : 1991 : R1997 | Standard Specification for Flat Glass |
| ASTM E 1300 : 2007 : EDT 1 | Standard Practice for Determining Load Resistance of Glass in Buildings |
| ASTM C 1279 : 2009 | Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.