• There are no items in your cart

ASTM C 1582/C1582M : 2011 : R2017 : EDT 1

Current
Current

The latest, up-to-date edition.

Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

06-15-2017

CONTAINED IN VOL 04.02, 2017 Specifies material for use as chloride-corrosion-inhibiting admixtures for concrete.

1.1This specification covers material for use as chloride-corrosion-inhibiting admixtures for concrete.

1.2Results of the tests conducted to meet this specification are not to be used to rank the expected field performance of various chloride-corrosion-inhibiting admixtures.

1.3The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use. (Warning—Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure.2)

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
C 09
DocumentType
Standard
Pages
10
ProductNote
Reconfirmed EDT 1
PublisherName
American Society for Testing and Materials
Status
Current

ASTM C 125 : 2021 Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM C 403/C403M : 2016 : REDLINE Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
ASTM C 494/C494M : 2019 Standard Specification for Chemical Admixtures for Concrete
ASTM C 494/C494M : 2019 : EDT 1 Standard Specification for Chemical Admixtures for Concrete
ASTM C 231/C231M : 2017 : REV A Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
ASTM G 109 : 2021 Standard Test Methods for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
ASTM C 150/C150M : 2017-04 SPECIFICATION FOR PORTLAND CEMENT
ASTM C 39/C39M : 2021 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C 78/C78M : 2021 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C 231/C231M : 2014 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
ASTM C 39/C39M : 2023 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C 78/C78M : 2016 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ACI 211.1 : 1991 SELECTING PROPORTIONS FOR NORMAL, HEAVYWEIGHT AND MASS CONCRETE
ASTM C 125 : 2000 Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM C 231/C231M : 2024 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
ASTM C 39/C39M : 2015 : REV A Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C 150/C150M : 2021 Standard Specification for Portland Cement
ASTM C 39/C39M : 2020 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C 666/C666M : 2015 : REDLINE Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing
ASTM C 403/C403M : 2023 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
ASTM G 180 : 2013 : REDLINE TEST METHOD FOR CORROSION INHIBITING ADMIXTURES FOR STEEL IN CONCRETE BY POLARIZATION RESISTANCE IN CEMENTITIOUS SLURRIES
ASTM C 143/C143M : 2015 : REV A Standard Test Method for Slump of Hydraulic-Cement Concrete
ASTM G 180 : 2023 Standard Test Method for Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries
ASTM C 125 : 2021 : REV A Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM G 109 : 2007 : R2013 Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
ASTM C 39/C39M : 2018 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM G 180 : 2013 : R2019 Standard Test Method for Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries
ASTM C 494/C494M : 2010 Standard Specification for Chemical Admixtures for Concrete
ASTM C 78/C78M : 2018 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C 157/C157M : 2017 : REDLINE Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete
ASTM C 666/C666M : 2015 Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing (Withdrawn 2024)
ASTM C 403/C403M : 2016 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
ASTM C 150/C150M : 2020 Standard Specification for Portland Cement
ASTM C 125 : 2020 Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM C 494/C494M : 2017 : REDLINE Standard Specification for Chemical Admixtures for Concrete
ASTM G 109 : 2023 Standard Test Methods for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
ASTM C 150/C150M : 2022 Standard Specification for Portland Cement
ASTM C 78/C78M : 2022 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C 231/C231M : 2022 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
ASTM G 180 : 2021 Standard Test Method for Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries
ASTM C 125 : 2009 Standard Terminology Relating to Concrete and Concrete Aggregates

View more information
US$63.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.