ASTM C 173/C173M : 2016 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
11-10-2023
English
03-30-2016
CONTAINED IN VOL. 04.02, 2016 Describes determination of air content of freshly mixed concrete containing any type of aggregate, whether it be dense, cellular, or lightweight.
1.1This test method covers determination of the air content of freshly mixed concrete containing any type of aggregate, whether it be dense, cellular, or lightweight.
1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The inch-pound units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. (Warning—Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure.2)
| Committee |
C 09
|
| DevelopmentNote |
Supersedes ASTM C 173 (07/2001)
|
| DocumentType |
Redline
|
| Pages |
9
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM C 1141/C1141M : 2015 : REDLINE | Standard Specification for Admixtures for Shotcrete |
| DIN 1045-3:2012-03 | Concrete, reinforced and prestressed concrete structures - Part 3: Execution of structures - Application rules for DIN EN 13670 |
| ASTM C 457/C457M : 2016 : REDLINE | Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete |
| ASTM C 387/C387M : 2017 : REDLINE | Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar |
| ASTM C 1116/C1116M : 2010 : REV A : R2015 | Standard Specification for Fiber-Reinforced Concrete |
| ASTM C 31/C31M : 2018-02 | PRACTICE FOR MAKING AND CURING CONCRETE TEST SPECIMENS IN THE FIELD |
| ASTM C 192/C192M : 2016-04 | PRACTICE FOR MAKING AND CURING CONCRETE TEST SPECIMENS IN THE LABORATORY |
| ASTM C 915 : 1979 : R1995 | Standard Specification for Precast Reinforced Concrete Crib Wall Members |
| ASTM C 915 : 1979 : R2002 | Standard Specification for Precast Reinforced Concrete Crib Wall Members |
| ASTM C 403/C403M : 2016 : REDLINE | Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance |
| 17/30354239 DC : 0 | BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| ACI 544.3R : 2008 | GUIDE FOR SPECIFYING, PROPORTIONING, AND PRODUCTION OF FIBER-REINFORCED CONCRETE |
| ASTM C 935 : 2013 | Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast |
| ASTM C 1610/C1610M : 2017 : REDLINE | Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique |
| ASTM C 1712 : 2017 : REDLINE | Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test |
| ACI 318 : 2014 | BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE AND COMMENTARY |
| ASTM C 1093 : 2015-06 | PRACTICE FOR ACCREDITATION OF TESTING AGENCIES FOR MASONRY |
| BS EN 13369:2013 | Common rules for precast concrete products |
| I.S. EN 13369:2013 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| ACI 304.6R : 2009 | GUIDE FOR USE OF VOLUMETRIC-MEASURING AND CONTINUOUS-MIXING CONCRETE EQUIPMENT |
| ACI 301 : 2016 | SPECIFICATIONS FOR STRUCTURAL CONCRETE |
| AASHTO T 197M/T 197 : 1900 | METHOD OF TEST FOR TIME OF SETTING OF CONCRETE MIXTURES BY PENETRATION RESISTANCE |
| ASTM C 1776/C1776M : 2017 | Standard Specification for Wet-Cast Precast Modular Retaining Wall Units |
| ASTM C 825 : 2006 : R2011 | Standard Specification for Precast Concrete Barriers |
| ASTM C 685/C685M : 2017 : REDLINE | Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing |
| ASTM C 1116/C1116M : 2010 | Standard Specification for Fiber-Reinforced Concrete |
| ACI 506.1R : 2008 | GUIDE TO FIBER-REINFORCED SHOTCRETE |
| ISO 1920-2:2016 | Testing of concrete Part 2: Properties of fresh concrete |
| ASTM C 1646/C1646M : 2016 : REDLINE | Standard Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete |
| ASTM G 109 : 2007 : R2013 | Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments |
| ACI 305.1M : 2014 | SPECIFICATION FOR HOT WEATHER CONCRETING (METRIC) |
| ACI 330.1M : 2014 | SPECIFICATION FOR UNREINFORCED CONCRETE PARKING LOTS AND SITE PAVING (METRIC) |
| ACI 318M : 2014 | BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE (ACI 318M-14) AND COMMENTARY (ACI 318RM-14) |
| ACI 543R : 2012 | GUIDE TO DESIGN, MANUFACTURE, AND INSTALLATION OF CONCRETE PILES |
| ACI ITG-8R : 2010 | REPORT ON PERFORMANCE-BASED REQUIREMENTS FOR CONCRETE |
| ASTM C 1439 : 2013 : REDLINE | Standard Test Methods for Evaluating Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar |
| CSA A23.1 A23.2 : 2014 | CONCRETE MATERIALS AND METHODS OF CONCRETE CONSTRUCTION/TEST METHODS AND STANDARD PRACTICES FOR CONCRETE |
| PREN 13369 : DRAFT 2017 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| ACI 211.2 : 1998 | SELECTING PROPORTIONS FOR STRUCTURAL LIGHTWEIGHT CONCRETE |
| UNE-EN 13369:2013 | Common rules for precast concrete products |
| ASTM C 1768/C1768M : 2012 | Standard Practice for Accelerated Curing of Concrete Cylinders |
| ACI 330.1 : 2014 | SPECIFICATION FOR UNREINFORCED CONCRETE PARKING LOTS AND SITE PAVING |
| ASTM C 1621/C1621M : 2017 : REDLINE | Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring |
| ACI 311.5R : 2004 | GUIDE FOR CONCRETE PLANT INSPECTION AND TESTING OF READY-MIXED CONCRETE |
| ACI PRC-506 : 2016 | GUIDE TO SHOTCRETE |
| ACI 311.6M : 2009 | SPECIFICATION FOR READY MIXED CONCRETE TESTING SERVICES |
| ACI 301M : 2016 | SPECIFICATIONS FOR STRUCTURAL CONCRETE |
| ASTM C 1077 : 2017 : REDLINE | Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation |
| DIN EN 13369:2013-08 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| ASTM C 1116/C1116M : 2010 : REV A | Standard Specification for Fiber-Reinforced Concrete |
| ASTM C 915 : 1979 : R2010 | Standard Specification for Precast Reinforced Concrete Crib Wall Members |
| ASTM G 109 : 2007 | Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments |
| ACI 305.1 : 2014 | SPECIFICATION FOR HOT WEATHER CONCRETING |
| ACI 362.1R : 2012 | GUIDE FOR THE DESIGN AND CONSTRUCTION OF DURABLE CONCRETE PARKING STRUCTURES |
| UNI EN 13369 : 2013 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| ASTM C 672/C672M : 2012 | Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals (Withdrawn 2021) |
| ACI 305R : 2010 | GUIDE TO HOT WEATHER CONCRETING |
| I.S. EN 13369:2018 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| ASTM C 979/C979M : 2016 : REDLINE | Standard Specification for Pigments for Integrally Colored Concrete |
| ASTM C 825 : 2006 | Standard Specification for Precast Concrete Barriers |
| EN 13369:2018 | Common rules for precast concrete products |
| ASTM C 1768/C1768M : 2012 : R2017 | Standard Practice for Accelerated Curing of Concrete Cylinders |
| ASTM C 1064/C1064M : 2017 : REDLINE | Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete |
| ASTM C 670 : 2015 : REDLINE | Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.