• There are no items in your cart

ASTM C 1880 : 2019

Current
Current

The latest, up-to-date edition.

Standard Practice for Sampling Gaseous Uranium Hexafluoride using Alumina Pellets
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

06-01-2019

This practice is applicable to sampling gaseous uranium hexafluoride (UF6) from processing facilities, isotope enrichment cascades or storage cylinders, using the sorbent properties of aluminum oxide (Al2O3).

1.1This practice is applicable to sampling gaseous uranium hexafluoride (UF6) from processing facilities, isotope enrichment cascades or storage cylinders, using the sorbent properties of aluminum oxide (Al2O3).

1.2It is based on the ‘ABACC-Cristallini Method’ (1, 2)2 and is intended to be used for the determination of uranium (U) isotopic composition required for nuclear material safeguards as well as other applications.

1.3The application of this practice assures the resulting sample vessel contains no UF6 and hydrogen fluoride (HF); therefore, it may be handled and categorized for transport under less stringent constraints.

1.4The scope of this practice does not include provisions for preventing criticality.

1.5Units—The values stated in SI units are to be regarded as the standard. When non-SI units are provided, they are for information only.

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
C 26
DocumentType
Standard Practice
Pages
6
ProductNote
THIS STANDARD ALSO REFERS TO- IAEA-TECDOC-771, USEC-651 Revision 10
PublisherName
American Society for Testing and Materials
Status
Current

ASTM C 1703 : 2018 Standard Practice for Sampling of Gaseous Uranium Hexafluoride for Enrichment
ASTM C 1346 : 2019 Standard Practice for Dissolution of UF<inf>6</inf> from P-10 Tubes
ASTM C 859 : 2023 Standard Terminology Relating to Nuclear Materials
ASTM C 1832 : 2016 Standard Test Method for Determination of Uranium Isotopic Composition by the Modified Total Evaporation (MTE) Method Using a Thermal Ionization Mass Spectrometer
ASTM C 1703 : 2018 : R2023 Standard Practice for Sampling of Gaseous Uranium Hexafluoride for Enrichment
ASTM C 859 : 2014 : REV B Standard Terminology Relating to Nuclear Materials
ASTM C 859 : 2024 Standard Terminology Relating to Nuclear Materials
ASTM C 1346 : 2002 Standard Practice for Dissolution of UF<sub>6</sub> from P-10 Tubes
ASTM D 1193 : 1977 : R1983 : EDT 1 Standard Specification for Reagent Water
ASTM C 1672 : 2017 Standard Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer
ASTM C 1474 : 2000 Standard Test Method for Analysis of Isotopic Composition of Uranium in Nuclear-Grade Fuel Material by Quadrupole Inductively Coupled Plasma-Mass Spectrometry
ASTM C 1346 : 2008 Standard Practice for Dissolution of UF<sub>6</sub> from P-10 Tubes
ASTM C 1703 : 2008 Standard Practice for Sampling of Gaseous Uranium Hexafluoride
ASTM C 1672 : 2023 Standard Test Method for Determination of the Uranium, Plutonium or Americium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer
ASTM C 1052 : 2014 Standard Practice for Bulk Sampling of Liquid Uranium Hexafluoride
ASTM C 1477 : 2008 : R2014 Standard Test Method for Isotopic Abundance Analysis of Uranium Hexafluoride and Uranyl Nitrate Solutions by Multi-Collector, Inductively Coupled Plasma-Mass Spectrometry
ASTM C 1477 : 2008 Standard Test Method for Isotopic Abundance Analysis of Uranium Hexafluoride and Uranyl Nitrate Solutions by Multi-Collector, Inductively Coupled Plasma-Mass Spectrometry
ASTM C 1346 : 2008 : R2014 Standard Practice for Dissolution of UF<inf>6</inf> from P-10 Tubes
ASTM D 1193 : 2006 : R2011 Standard Specification for Reagent Water
ASTM C 1832 : 2022 Standard Test Method for Determination of Uranium Isotopic Composition by Modified Total Evaporation (MTE) Method Using Thermal Ionization Mass Spectrometer
ASTM C 1832 : 2021 Standard Test Method for Determination of Uranium Isotopic Composition by Modified Total Evaporation (MTE) Method Using Thermal Ionization Mass Spectrometer
ASTM C 1672 : 2007 : R2014 Standard Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer
ASTM C 1052 : 1996 Standard Practice for Bulk Sampling of Liquid Uranium Hexafluoride
ASTM C 1871 : 2018 : REV A Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer
ASTM C 859 : 2022 Standard Terminology Relating to Nuclear Materials
ASTM C 859 : 2022 : REV A Standard Terminology Relating to Nuclear Materials
ASTM D 1193 : 1991 Standard Specification for Reagent Water
ASTM C 1477 : 2000 Standard Test Method for Isotopic Abundance Analysis of Uranium Hexafloride by Multi-Collector, Inductively Coupled Plasma-Mass Spectrometry
ASTM C 1672 : 2007 Standard Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer
ASTM C 1474 : 2000 : R2011 Standard Test Method for Analysis of Isotopic Composition of Uranium in Nuclear-Grade Fuel Material by Quadrupole Inductively Coupled Plasma-Mass Spectrometry
ASTM C 1346 : 1996 Standard Practice for Dissolution of UF<sub>6</sub> from P-10 Tubes
ASTM C 1474 : 2019 Standard Test Method for Analysis of Isotopic Composition of Uranium in Nuclear-Grade Fuel Material by Quadrupole Inductively Coupled Plasma-Mass Spectrometry
ASTM C 1477 : 2019 Standard Test Method for Isotopic Abundance Analysis of Uranium Hexafluoride and Uranyl Nitrate Solutions by Multi-Collector, Inductively Coupled Plasma-Mass Spectrometry
ASTM D 1193 : 1970 Standard Specification For Reagent Water
ASTM C 1871 : 2018 Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer
ASTM C 1052 : 2001 Standard Practice for Bulk Sampling of Liquid Uranium Hexafluoride
ASTM C 1703 : 2008 : R2013 Standard Practice for Sampling of Gaseous Uranium Hexafluoride
ASTM D 1193 : 2006 Standard Specification for Reagent Water
ASTM C 1832 : 2023 Standard Test Method for Determination of Uranium Isotopic Composition by Modified Total Evaporation (MTE) Method Using Thermal Ionization Mass Spectrometer
ASTM D 1193 : 1999 Standard Specification for Reagent Water
ASTM C 1871 : 2022 Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer
ASTM D 1193 : 2006 : R2018 Standard Specification for Reagent Water
ASTM C 1052 : 2001 : R2007 Standard Practice for Bulk Sampling of Liquid Uranium Hexafluoride
ASTM C 1477 : 2006 Standard Test Method for Isotopic Abundance Analysis of Uranium Hexafluoride and Uranyl Nitrate Solutions by Multi-Collector, Inductively Coupled Plasma-Mass Spectrometry
ASTM C 1474 : 2000 : R2006 : EDT 1 Standard Test Method for Analysis of Isotopic Composition of Uranium in Nuclear-Grade Fuel Material by Quadrupole Inductively Coupled Plasma-Mass Spectrometry

View more information
US$63.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.