• There are no items in your cart

ASTM D 1613 : 2017

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
Available format(s)

Hardcopy , PDF

Superseded date

08-25-2023

Language(s)

English

Published date

02-24-2017

This test method covers the determination of total acidity as acetic acid, in concentrations below 0.05 %, in organic compounds and hydrocarbon mixtures used in paint, varnish, and lacquer solvents and diluents.

1.1This test method covers the determination of total acidity as acetic acid, in concentrations below 0.05 %, in organic compounds and hydrocarbon mixtures used in paint, varnish, and lacquer solvents and diluents. It is known to be applicable to such mixtures as low molecular weight saturated and unsaturated alcohols, ketones, ethers, esters, hydrocarbon diluents, naphtha, and other light distillate petroleum fractions.

1.2For purposes of determining conformance of an observed value or a calculated value using this test method to relevant specifications, test result(s) shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.

1.3The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.4For specific hazard information and guidance consult supplier’s Safety Data Sheet.

1.5This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 01
DocumentType
Test Method
Pages
3
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 1153 : 2022 Standard Specification for Methyl Isobutyl Ketone
ASTM D 268 : 2022 Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material
ASTM D 4360 : 2011 : R2019 Standard Specification for Methyl <emph type="bdit">n</emph>-Amyl Ketone
ASTM D 740 : 2011 : R2019 Standard Specification for Methyl Ethyl Ketone<sup>,</sup>
ASTM D 5797 : 2021 Standard Specification for Methanol Fuel Blends (M51–M85) for Methanol-Capable Automotive Spark-Ignition Engines
ASTM D 2917 : 2007 : R2021 Standard Specification for Methyl Isoamyl Ketone
ASTM E 1177 : 2023 Standard Specification for Engine Coolant Grade Glycol
ASTM D 3130 : 2011 : R2019 Standard Specification for <emph type="bdit">n</emph>-Propyl Acetate (96 % Grade)
ASTM D 3545 : 2022 Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography
ASTM D 4615 : 2022 Standard Specification for <emph type="ital">n</emph>-Butyl Acetate (All Grades)
ASTM D 1007 : 2011 : R2019 Standard Specification for <emph type="bdit">sec</emph>-Butyl Alcohol<sup>,</sup>
ASTM D 3585 : 2008 : R2020 Standard Specification for ASTM Reference Fluid for Coolant Tests
ASTM D 3131 : 2007 : R2021 Standard Specification for Isopropyl Acetate (99 % Grade)
ASTM D 331 : 2011 : R2019 Standard Specification for 2-Ethoxyethanol<sup>,</sup>
ASTM D 7862 : 2021 Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 770 : 2011 : R2019 Standard Specification for Isopropyl Alcohol<sup>,</sup>
ASTM D 304 : 2011 : R2019 Standard Specification for <emph type="bdit">n</emph>-Butyl Alcohol (Butanol)
ASTM D 3622 : 2011 : R2019 Standard Specification for 1-Propanol (<emph type="bdit">n</emph>-Propyl Alcohol)
ASTM D 330 : 2007 : R2021 Standard Specification for 2-Butoxyethanol
ASTM D 4171 : 2022 Standard Specification for Fuel System Icing Inhibitors
ASTM D 4614 : 2011 : R2019 Standard Specification for Ethyl Acetate (All Grades)
ASTM D 5137 : 2007 : R2021 Standard Specification for Hexyl Acetate
ASTM D 7388 : 2023 Standard Specification for Engine Coolant Grade 1,3-Propanediol (PDO)
ASTM D 2634 : 2007 : R2021 Standard Specification for Methyl Amyl Acetate (95 % Grade)
ASTM E 202 : 2018 Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols
ASTM D 1719 : 2011 : R2019 Standard Specification for Isobutyl Alcohol<sup>,</sup>
ASTM D 2804 : 2022 Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography
ASTM D 3128 : 2007 : R2021 Standard Specification for 2-Methoxyethanol
ASTM D 329 : 2007 : R2021 Standard Specification for Acetone
ASTM D 5798 : 2021 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
ASTM D 4171 : 2016 : REV A Standard Specification for Fuel System Icing Inhibitors
ASTM D 7388 : 2018 Standard Specification for Engine Coolant Grade 1,3-Propanediol (PDO)
ASTM D 5797 : 2018 Standard Specification for Methanol Fuel Blends (M51–M85) for Methanol-Capable Automotive Spark-Ignition Engines
ASTM D 3128 : 2007 : R2013 Standard Specification for 2-Methoxyethanol
ASTM D 3893 : 2003 : R2017 Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography
ASTM D 5137 : 2007 : R2013 Standard Specification for Hexyl Acetate
ASTM D 2917 : 2007 : R2013 Standard Specification for Methyl Isoamyl Ketone
ASTM D 4709 : 2007 : R2012 Standard Specification for Methyl Acrylate (Withdrawn 2021)
ASTM D 2636 : 2007 : R2012 Standard Specification for Hexylene Glycol (Withdrawn 2021)
ASTM D 3540 : 2012 Standard Specification for Primary Amyl Acetate, Synthetic (98 % Grade) (Withdrawn 2021)
ASTM D 3728 : 2008 : R2012 Standard Specification for 2-Ethoxyethyl Acetate (99 % Grade) (Withdrawn 2021)
ASTM D 7862 : 2019 Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 3329 : 2003 : R2017 Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography
ASTM D 1718 : 2009 : R2017 Standard Specification for Isobutyl Acetate (95 % Grade)
ASTM D 2635 : 2007 : R2012 Standard Specification for Methyl Isobutyl Carbinol (Withdrawn 2021)
ASTM D 329 : 2007 : R2013 Standard Specification for Acetone
ASTM D 4615 : 2012 Standard Specification for n-Butyl Acetate (All Grades) (Withdrawn 2021)
ASTM D 5008 : 2007 : R2012 Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography (Withdrawn 2021)
ASTM D 4837 : 2007 : R2012 Standard Specification for Propylene Glycol Monomethyl Ether (Withdrawn 2021)
ASTM D 2627 : 2008 : R2012 Standard Specification for Diacetone Alcohol (Withdrawn 2021)
ASTM D 2916 : 2009 : R2017 Standard Specification for Isophorone
ASTM D 7713 : 2018 Standard Specification for Aqueous Engine Coolant Grade Glycol (53 % by Volume Nominal)
ASTM D 4806 : 2019 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 3131 : 2007 : R2013 Standard Specification for Isopropyl Acetate (99 % Grade)
ASTM E 1177 : 2014 Standard Specification for Engine Coolant Grade Glycol
ASTM D 1153 : 2012 Standard Specification for Methyl Isobutyl Ketone (Withdrawn 2021)
ASTM D 3545 : 2006 : R2012 Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography (Withdrawn 2021)
ASTM D 330 : 2007 : R2013 Standard Specification for 2-Butoxyethanol
ASTM D 2634 : 2007 : R2013 Standard Specification for Methyl Amyl Acetate (95 % Grade)
ASTM D 2804 : 2002 : R2012 Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography (Withdrawn 2021)
ASTM D 268 : 2001 : R2012 Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material (Withdrawn 2021)
ASTM D 3548 : 2009 : R2017 Standard Specification for Ethyl Acrylate
ASTM D 4773 : 2002 : R2012 Standard Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate (Withdrawn 2021)
ASTM D 3585 : 2008 : R2013 Standard Specification for ASTM Reference Fluid for Coolant Tests
ASTM D 608 : 2005 : R2019 Standard Specification for Dibutyl Phthalate
ASTM D 4252 : 1989 : R2017 Standard Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates
ASTM D 4836 : 2009 : R2017 Standard Specification for Dipropylene Glycol Monomethyl Ether
ASTM D 4835 : 2008 : R2012 Standard Specification for Propylene Glycol Monomethyl Ether Acetate (Withdrawn 2021)

ASTM D 4806 : 2021 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2002 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2016 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 7795 : 2012 Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration
ASTM D 4806 : 2021 : REV A Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM E 29 : 2013 : R2019 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM D 4806 : 2007 : REV A Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM E 29 : 2002 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM D 4806 : 2015 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2006 : REV B Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 1193 : 1977 : R1983 : EDT 1 Standard Specification for Reagent Water
ASTM D 4806 : 2006 : REV A Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2006 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2001 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2014 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2004 : REV A Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2013 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2001 : REV A Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2003 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2008 : REV A Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 7795 : 2015 : R2022 : EDT 1 Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration
ASTM D 4806 : 2018 : REV A Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 1193 : 2006 : R2011 Standard Specification for Reagent Water
ASTM D 4806 : 2017 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2010 : REV A Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2011 : REV A Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2016 : REV A Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM E 200 : 2016 Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis
ASTM D 4806 : 2007 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2019 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2004 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2010 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 1193 : 1991 Standard Specification for Reagent Water
ASTM D 4806 : 2011 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM E 200 : 2023 Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis
ASTM D 4806 : 2013 : REV A Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2019 : REV A Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2018 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2008 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2006 : REV C Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 1193 : 1970 Standard Specification For Reagent Water
ASTM D 4806 : 2009 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2020 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 2012 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 1193 : 2006 Standard Specification for Reagent Water
ASTM D 7795 : 2015 Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration
ASTM D 1193 : 1999 Standard Specification for Reagent Water
ASTM D 4806 : 2010 : REV B Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 4806 : 1999 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
ASTM D 1193 : 2006 : R2018 Standard Specification for Reagent Water
ASTM E 29 : 2022 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

View more information
US$66.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.