• There are no items in your cart

ASTM D 2244 : 2015 : EDT 1

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
Available format(s)

Hardcopy , PDF

Superseded date

06-16-2015

Language(s)

English

Published date

01-01-2015

1.1This practice covers the calculation, from instrumentally measured color coordinates based on daylight illumination, of color tolerances and small color differences between opaque specimens such as painted panels, plastic plaques, or textile swatches. Where it is suspected that the specimens may be metameric, that is, possess different spectral curves though visually alike in color, Practice D4086 should be used to verify instrumental results. The tolerances and differences determined by these procedures are expressed in terms of approximately uniform visual color perception in CIE 1976 CIELAB opponent-color space (1),2 CMC tolerance units (2), CIE94 tolerance units (3), the DIN99 color difference formula given in DIN 6176 (4), or the new CIEDE2000 color difference units (5).

1.2For product specification, the purchaser and the seller shall agree upon the permissible color tolerance between test specimen and reference and the procedure for calculating the color tolerance. Each material and condition of use may require specific color tolerances because other appearance factors, (for example, specimen proximity, gloss, and texture), may affect the correlation between the magnitude of a measured color difference and its commercial acceptability.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Committee
E 12
DocumentType
Standard Practice
Pages
11
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 2454 : 2018 Standard Practice for Determining the Effect of Overbaking on Organic Coatings
ASTM D 822/D822M : 2013 : R2018 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
ASTM C 609 : 2007 : R2019 Standard Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile
ASTM G 201 : 2016 Standard Practice for Conducting Exposures in Outdoor Glass-Covered Exposure Apparatus with Air Circulation
ASTM D 3730 : 2017 Standard Guide for Testing High-Performance Interior Architectural Wall Coatings
ASTM F 2366 : 2012 Standard Practice for Determining the Relative Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight Using a Xenon Arc Light Apparatus (Withdrawn 2020)
ASTM F 1514 : 2003 : R2013 Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change
ASTM C 1501 : 2019 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
ASTM D 3679 : 2017 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
ASTM C 744 : 2016 Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units
ASTM E 1247 : 2012 : R2017 Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry
ASTM F 1206 : 1994 : R2011 : EDT 1 Standard Test Method for Evaluating Color Image Output from Color Printers and Copiers (Withdrawn 2020)
ASTM E 1347 : 2006 : R2015 Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM D 6577 : 2015 Standard Guide for Testing Industrial Protective Coatings
ASTM D 4459 : 2012 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications
ASTM D 3451 : 2006 : R2017 Standard Guide for Testing Coating Powders and Powder Coatings
ASTM D 333 : 2001 : R2013 Standard Guide for Clear and Pigmented Lacquers
ASTM D 6763 : 2016 Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents
ASTM D 7856 : 2015 : REV A Standard Specification for Color and Appearance Retention of Solid and Variegated Color Plastic Siding Products using CIELab Color Space
ASTM D 4303 : 2010 : R2016 Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials
ASTM E 1345 : 1998 : R2019 Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
ASTM D 7793 : 2017 Standard Specification for Insulated Vinyl Siding
ASTM D 7195 : 2016 : REV A Standard Guide for Setting Object Color Specifications
ASTM E 308 : 2018 Standard Practice for Computing the Colors of Objects by Using the CIE System
ASTM D 5531 : 2017 Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
ASTM D 868 : 2010 : R2015 Standard Practice for Determination of Degree of Bleeding of Traffic Paint
ASTM D 4477 : 2016 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit
ASTM D 387 : 2000 : R2017 Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller (Withdrawn 2023)
ASTM F 2589 : 2016 Standard Specification for Ornamental Fences Employing Steel Tubular Pickets
ASTM A 755/A755M : 2018 Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
ASTM D 4141/D4141M : 2014 Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings
ASTM D 2745 : 2000 : R2017 Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements
ASTM D 3424 : 2011 Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter (Withdrawn 2020)
ASTM E 2301 : 2012 : R2017 Standard Test Method for Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45°:Normal Geometry
ASTM D 4302 : 2014 Standard Specification for Artists’ Oil, Resin-Oil, and Alkyd Paints
ASTM D 4587 : 2011 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
ASTM D 5452 : 2012 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM D 3794 : 2018 Standard Guide for Testing Coil Coatings
ASTM E 1348 : 2015 : EDT 1 Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
ASTM D 5326 : 1994 : REV A : R2013 Standard Test Method for Color Development in Tinted Latex Paints
ASTM D 2276 : 2006 : R2014 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
ASTM F 934 : 1996 : R2017 Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials
ASTM F 940 : 1999 : R2013 Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding
ASTM D 2066 : 2007 : R2012 Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions
ASTM D 6290 : 2019 Standard Test Method for Color Determination of Plastic Pellets
ASTM E 2808 : 2011 Standard Guide for Microspectrophotometry and Color Measurement in Forensic Paint Analysis
ASTM D 5382 : 2002 : R2017 Standard Guide to Evaluation of Optical Properties of Powder Coatings
ASTM F 2035 : 2000 : R2011 Standard Practice for Measuring the Dark Stability of Ink Jet Prints (Withdrawn 2020)
ASTM F 1515 : 2015 Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change
ASTM C 1510 : 2001 : R2016 Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry
ASTM D 4674 : 2019 Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments
ASTM D 5150 : 1992 : R2017 Standard Test Method for Hiding Power of Architectural Paints Applied by Roller
ASTM E 1331 : 2015 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
ASTM F 2957 : 2013 : R2019 : EDT 1 Standard Specification for Ornamental Aluminum Fence Systems
ASTM D 7445 : 2018 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)
ASTM C 1650 : 2014 Standard Practice for Instrumental Reflectance Measurement of Color for Flat Glass, Coated, and Uncoated
ASTM D 2205 : 2015 Standard Guide for Selection of Tests for Traffic Paints
ASTM C 1520 : 2002 : R2015 : EDT 1 Standard Guide for Paintability of Latex Sealants
ASTM D 2248 : 2001 : REV A : R2018 Standard Practice for Detergent Resistance of Organic Finishes
ASTM D 2985/D2985M : 1992 : R2019 Standard Test Method for Color of Asbestos (Withdrawn 2022)
ASTM D 3134 : 2015 Standard Practice for Establishing Color and Gloss Tolerances
ASTM D 279 : 2002 : R2019 Standard Test Methods for Bleeding of Pigments
ASTM D 4726 : 2018 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors
ASTM E 991 : 2016 Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method
ASTM E 805 : 2012 : REV A : R2017 Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
ASTM D 6695 : 2016 Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
ASTM C 1376 : 2015 Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass
ASTM C 1649 : 2014 Standard Practice for Instrumental Transmittance Measurement of Color for Flat Glass, Coated and Uncoated
ASTM C 1364 : 2018 Standard Specification for Architectural Cast Stone
ASTM F 1945 : 2005 : R2011 Standard Practice for Determining the Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting (Withdrawn 2020)
ASTM F 2408 : 2016 Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets
ASTM G 178 : 2016 Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique
ASTM D 7932 : 2017 Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments
ASTM F 2037 : 2000 : R2011 Standard Practice for Predicting the Lifetime of Ink Jet Prints Stored in Dark Keeping Conditions in Typical Office Environments (Withdrawn 2020)
ASTM D 7270 : 2007 : R2013 Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings
ASTM E 2867 : 2014 : R2019 Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry
ASTM D 5324 : 2016 Standard Guide for Testing Water-Borne Architectural Coatings
ASTM D 5319 : 2017 Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels
ASTM E 2214 : 2019 Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
ASTM F 925 : 2013 Standard Test Method for Resistance to Chemicals of Resilient Flooring
ASTM D 3322 : 1982 : R2017 Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
ASTM D 6901 : 2015 Standard Specification for Artists' Colored Pencils
ASTM E 3040 : 2018 Standard Practice for Evaluation of Instrumental Color Difference with a Gray Scale
ASTM D 7990 : 2015 Standard Test Method for Using Reflectance Spectra to Produce an Index of Temperature Rise in Polymeric Siding
ASTM D 5215 : 1993 : R2012 Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives
ASTM D 3022 : 1984 : R2011 Standard Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill (Withdrawn 2020)
ASTM D 3361/D3361M : 2013 : R2018 Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
ASTM E 1349 : 2006 : R2018 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry
ASTM D 1148 : 2013 : R2018 Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces
ASTM D 5031/D5031M : 2013 : R2018 Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings
ASTM D 1014 : 2018 Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates
ASTM D 6531 : 2000 : R2019 Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement
ASTM D 5146 : 2010 : R2019 Standard Guide to Testing Solvent-Borne Architectural Coatings

View more information
US$83.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.