• There are no items in your cart

ASTM D 2584 : 2018

Current
Current

The latest, up-to-date edition.

Standard Test Method for Ignition Loss of Cured Reinforced Resins
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

09-15-2018

This test method covers the determination of the ignition loss of cured reinforced resins.

1.1This test method covers the determination of the ignition loss of cured reinforced resins. This ignition loss shall be considered to be the resin content within the limitations of 4.2.

1.2The values stated in SI units are to be regarded as the standard.

1.3This standard is used to measure and describe the response of composite material to heat under controlled conditions, but does not by itself incorporate all of the factors required for fire hazard or fire assessments of the composite materials under actual fire conditions.

1.4Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed in conducting these tests.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

Note 1:There is no known ISO equivalent to this standard.

1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 20
DocumentType
Test Method
Pages
3
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM D 7745 : 2011 Standard Practice for Testing Pultruded Composites
ASTM D 5450/D5450M : 2016 Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM C 364/C364M : 2016 Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
ASTM D 3262 : 2016 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
ASTM D 6041 : 2018 Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings
ASTM C 581 : 2015 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
ASTM D 7248/D7248M : 2012 : R2017 Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
ASTM D 6484/D6484M : 2014 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
ASTM D 7905/D7905M : 2019 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D 5961/D5961M : 2017 Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates
ASTM D 5449/D5449M : 2016 Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D 3299 : 2018 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
ASTM D 5364 : 2014 : R2019 Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced (FRP) Plastic Chimney Liners with Coal-Fired Units
ASTM D 3982 : 2008 : R2014 Standard Specification for Contact Molded “Fiberglass” (Glass Fiber Reinforced Thermosetting Resin) Ducts
ASTM C 613 : 2019 Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
ASTM D 5630 : 2013 Standard Test Method for Ash Content in Plastics (Withdrawn 2022)
ASTM D 3489 : 2017 Standard Test Methods for Microcellular Urethane Materials
ASTM D 3753 : 2012 : EDT 1 Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells
ASTM D 3754 : 2014 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
ASTM F 1173 : 2001 : R2018 Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
ASTM D 7957/D7957M : 2017 Standard Specification for Solid Round Glass Fiber Reinforced Polymer Bars for Concrete Reinforcement
ASTM D 4097 : 2018 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
ASTM D 5448/D5448M : 2016 Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D 5229/D5229M : 2014 : EDT 1 Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials
ASTM F 790 : 2018 Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures
ASTM D 3410/D3410M : 2016 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM D 2344/D2344M : 2016 Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
ASTM D 6783 : 2005 : REV A : R2017 Standard Specification for Polymer Concrete Pipe
ASTM C 273/C273M : 2018 Standard Test Method for Shear Properties of Sandwich Core Materials
ASTM D 4762 : 2018 Standard Guide for Testing Polymer Matrix Composite Materials
ASTM D 3039/D3039M : 2017 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
ASTM D 4203 : 2017 Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials
ASTM D 3517 : 2014 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
ASTM D 4255/D4255M : 2015 : REV A Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
ASTM D 7078/D7078M : 2012 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM D 5467/D5467M : 1997 : R2017 Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam
ASTM D 3935 : 2015 Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material
ASTM D 6416/D6416M : 2016 Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
ASTM D 5379/D5379M : 2012 Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
ASTM D 2734 : 2016 Standard Test Methods for Void Content of Reinforced Plastics
ASTM C 582 : 2009 : R2016 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment
ASTM C 297/C297M : 2016 Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
ASTM D 4000 : 2016 Standard Classification System for Specifying Plastic Materials
ASTM E 1556 : 2012 Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair
ASME NM.3.2:2022 Nonmetallic Materials Part 2 - Reinforced Thermoset Plastic Material Specifications

ASTM E 2935 : 2017 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM E 2935 : 2014 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM E 691 : 2020 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 2935 : 2013 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM E 691 : 2019 : EDT 1 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 691 : 2023 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 2935 : 2020 Standard Practice for Conducting Equivalence Tests for Comparing Testing Processes
ASTM E 691 : 2022 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 691 : 2009 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 2935 : 2020 : EDT 1 Standard Practice for Conducting Equivalence Tests for Comparing Testing Processes
ASTM D 618 : 2013 Standard Practice for Conditioning Plastics for Testing
ASTM E 691 : 2021 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 2935 : 2016 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM E 2935 : 2021 Standard Practice for Evaluating Equivalence of Two Testing Processes
ASTM E 2935 : 2015 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM D 618 : 2021 Standard Practice for Conditioning Plastics for Testing

View more information
US$55.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.