• There are no items in your cart

ASTM D 3039/D3039M : 2017

Current
Current

The latest, up-to-date edition.

Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

11-09-2017

This test method determines the in-plane tensile properties of polymer matrix composite materials reinforced by high-modulus fibers.

1.1This test method determines the in-plane tensile properties of polymer matrix composite materials reinforced by high-modulus fibers. The composite material forms are limited to continuous fiber or discontinuous fiber-reinforced composites in which the laminate is balanced and symmetric with respect to the test direction.

1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the inch-pound units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 30
DocumentType
Test Method
Pages
13
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

SAE AMS6562:2023 Medium Temperature, Out-of-Autoclave, Oven-Vacuum-Bag Cure Epoxy Resin Impregnated Fiber Reinforced Composite Materials

ASTM D 3171 : 1999 Standard Test Methods for Constituent Content of Composite Materials
ASTM D 883 : 2023 Standard Terminology Relating to Plastics
ASTM E 83 : 2023 Standard Practice for Verification and Classification of Extensometer Systems
ASTM E 177 : 1990 : REV A : R1996 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E 1012 : 2014 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
ASTM D 2584 : 2002 Standard Test Method for Ignition Loss of Cured Reinforced Resins
ASTM E 456 : 2002 Standard Terminology for Relating to Quality and Statistics
ASTM D 3878 : 2002 : REV A Standard Terminology for Composite Materials
ASTM E 83 : 2000 : EDT 1 Standard Practice for Verification and Classification of Extensometer
ASTM D 883 : 2024 Standard Terminology Relating to Plastics
ASTM D 3878 : 2023 Standard Terminology for Composite Materials
ASTM E 83 : 2016 Standard Practice for Verification and Classification of Extensometer Systems
ASTM E 456 : 2013 : REV A : R2022 Standard Terminology Relating to Quality and Statistics
ASTM E 1237 : 1993 : R1998 Standard Guide for Installing Bonded Resistance Strain Gages
ASTM D 3878 : 2015 Standard Terminology for Composite Materials
ASTM D 2584 : 2008 Standard Test Method for Ignition Loss of Cured Reinforced Resins
ASTM D 3878 : 2019 Standard Terminology for Composite Materials
ASTM E 83 : 1998 : EDT 1 Standard Practice for Verification and Classification of Extensometer
ASTM D 3878 : 2000 Standard Terminology Composite Materials
ASTM D 2584 : 1994 Standard Test Method for Ignition Loss of Cured Reinforced Resins
ASTM D 883 : 2022 Standard Terminology Relating to Plastics
ASTM D 883 : 2020 : REV B Standard Terminology Relating to Plastics
ASTM D 3171 : 2011 Standard Test Methods for Constituent Content of Composite Materials
ASTM E 6 : 2002 Standard Terminology Relating to Methods of Mechanical Testing
ASTM D 2734 : 2023 Standard Test Methods for Void Content of Reinforced Plastics
ASTM E 1012 : 1999 Standard Practice for Verification of Specimen Alignment Under Tensile Loading
ASTM D 2734 : 2016 Standard Test Methods for Void Content of Reinforced Plastics
ASTM E 1012 : 2012 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
ASTM E 456 : 2013 : REV A : R2017 : EDT 5 Standard Terminology Relating to Quality and Statistics
ASTM E 122 : 2017 : R2022 Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
ASTM E 122 : 2017 Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
ASTM E 1012 : 2014 : EDT 1 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
ASTM D 3878 : 2003 : REV A Standard Terminology for Composite Materials
ASTM D 2584 : 2011 Standard Test Method for Ignition Loss of Cured Reinforced Resins
ASTM E 1237 : 1993 : R2009 Standard Guide for Installing Bonded Resistance Strain Gages
ASTM D 3878 : 2016 Standard Terminology for Composite Materials
ASTM D 3878 : 2019 : REV A Standard Terminology for Composite Materials
ASTM D 3878 : 2020 : REV A Standard Terminology for Composite Materials
ASTM D 3878 : 1998 Standard Terminology Composite Materials
ASTM D 3171 : 2022 Standard Test Methods for Constituent Content of Composite Materials
ASTM D 3878 : 2018 Standard Terminology for Composite Materials
ASTM E 1012 : 2012 : EDT 1 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
ASTM D 3171 : 2009 Standard Test Methods for Constituent Content of Composite Materials
ASTM D 3878 : 2002 Standard Terminology for Composite Materials
ASTM E 6 : 2015 : EDT 3 Standard Terminology Relating to Methods of Mechanical Testing
ASTM D 3878 : 2020 : REV B Standard Terminology for Composite Materials
ASTM E 1237 : 1993 : R2003 Standard Guide for Installing Bonded Resistance Strain Gages
ASTM D 2584 : 1968 Standard Method Of Test For Ignition Loss Of Cured Reinforced Resins
ASTM E 6 : 2023 : REV A Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 1012 : 2005 Standard Practice for Verification of Test Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
ASTM D 3878 : 2004 Standard Terminology for Composite Materials
ASTM E 4 : 2021 Standard Practices for Force Calibration and Verification of Testing Machines
ASTM E 1237 : 1993 : R2014 Standard Guide for Installing Bonded Resistance Strain Gages
ASTM D 2734 : 1994 Standard Test Methods for Void Content of Reinforced Plastics
ASTM D 3878 : 2007 : R2013 Standard Terminology for Composite Materials
ASTM D 3878 : 2020 : REDLINE Standard Terminology for Composite Materials
ASTM D 3878 : 2020 Standard Terminology for Composite Materials
ASTM D 2584 : 2018 Standard Test Method for Ignition Loss of Cured Reinforced Resins
ASTM D 3878 : 2003 Standard Terminology for Composite Materials
ASTM E 6 : 2015 : EDT 4 : REDLINE Standard Terminology Relating to Methods of Mechanical Testing
ASTM D 3878 : 2007 Standard Terminology for Composite Materials
ASTM D 2734 : 2009 Standard Test Methods for Void Content of Reinforced Plastics
ASTM D 3171 : 1999 : R2004 Standard Test Methods for Constituent Content of Composite Materials
ASTM E 6 : 2015 : EDT 4 Standard Terminology Relating to Methods of Mechanical Testing
ASTM D 3171 : 2015 Standard Test Methods for Constituent Content of Composite Materials
ASTM E 6 : 2023 Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 456 : 2013 : REV A : R2017 : EDT 4 Standard Terminology Relating to Quality and Statistics
ASTM E 456 : 2013 : REV A : R2017 : EDT 6 Standard Terminology Relating to Quality and Statistics
ASTM D 3878 : 2004 : REV A Standard Terminology for Composite Materials
ASTM D 3171 : 2006 Standard Test Methods for Constituent Content of Composite Materials
ASTM E 1012 : 2019 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
ASTM D 3878 : 2001 Standard Terminology Composite Materials

View more information
US$69.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.