Name: ASTM D 3134 : 2015
Brand: ASTM
Price: 75.00 USD

ASTM D 3134 : 2015

Superseded

View Superseded by

Standard Practice for Establishing Color and Gloss Tolerances

Available format(s)

Hardcopy , PDF

Superseded date

11-19-2019

Language(s)

English

Published date

01-01-2015

Publisher

American Society for Testing and Materials

1.1This practice describes a procedure for establishing tolerances and evaluating the color and gloss of specimens with respect to specified standards. This practice is appropriate for nonfluorescent opaque specimens.

1.2This practice does not indicate the extent of tolerances, but gives guidance on how they can be set. For product specification, the tolerances between specimens and the specified standard should be agreed upon between the purchaser and the seller.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee	E 12
DocumentType	Standard Practice
Pages	7
PublisherName	American Society for Testing and Materials
Status	Superseded
SupersededBy	ASTM D 3134 : 2015 : R2019
Supersedes	ASTM D 3134 : 1997 : R2008 : EDT 1

ASTM D 6577 : 2015 : R2019	Standard Guide for Testing Industrial Protective Coatings
ASTM D 1535 : 2014 : R2018	Standard Practice for Specifying Color by the Munsell System
ASTM E 1808 : 1996 : R2015	Standard Guide for Designing and Conducting Visual Experiments
ASTM D 7195 : 2016 : REV A	Standard Guide for Setting Object Color Specifications
ASTM D 5531 : 2017	Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
ASTM E 1499 : 2016	Standard Guide for Selection, Evaluation, and Training of Observers
ASTM D 6577 : 2015	Standard Guide for Testing Industrial Protective Coatings
ASTM C 647 : 2019	Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation
ASTM D 3451 : 2006 : R2017	Standard Guide for Testing Coating Powders and Powder Coatings
ASTM E 1345 : 1998 : R2019	Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
ASTM D 3794 : 2018	Standard Guide for Testing Coil Coatings
ASTM D 5382 : 2002 : R2017	Standard Guide to Evaluation of Optical Properties of Powder Coatings

ASTM D 1535 : 2007	Standard Practice for Specifying Color by the Munsell System
ASTM E 1499 : 2016	Standard Guide for Selection, Evaluation, and Training of Observers
ASTM E 1331 : 1996	Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E 1331 : 2015	Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E 1499 : 1997	Standard Guide for Selection, Evaluation, and Training of Observers
ASTM E 1499 : 1997 : R2009	Standard Guide for Selection, Evaluation, and Training of Observers
ASTM D 3964 : 2010 : R2015	Standard Practice for Selection of Coating Specimens for Appearance Measurements
ASTM D 2244 : 2015	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM E 1164 : 2007	Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
ASTM D 1535 : 2012 : REV A	Standard Practice for Specifying Color by the Munsell System
ASTM D 2244 : 2011	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM E 1499 : 1997 : R2003	Standard Guide for Selection, Evaluation, and Training of Observers
ASTM D 1729 : 2016	Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
ASTM D 5531 : 2017	Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
ASTM E 1345 : 1998 : R2008	Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
ASTM D 2244 : 2009	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 3964 : 2004	Standard Practice for Selection of Coating Specimens for Appearance Measurements
ASTM E 1164 : 2009	Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
ASTM D 2244 : 2002	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 2244 : 2016	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 1535 : 2013	Standard Practice for Specifying Color by the Munsell System
ASTM D 5531 : 2005 : R2011	Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
ASTM D 2244 : 2015 : EDT 1	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 2244 : 2009 : REV B	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 2244 : 2002 : EDT 1	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 3964 : 2010	Standard Practice for Selection of Coating Specimens for Appearance Measurements
ASTM D 1535 : 1968	Standard Method Of Specifying Color By The Munsell System
ASTM D 2244 : 2015 : REV A	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM E 1541 : 1998	Standard Practice for Specifying and Matching Color Using the Colorcurve System
ASTM D 3964 : 1980 : R1998	Standard Practice for Selection of Coating Specimens for Appearance Measurements
ASTM D 1729 : 1996 : R2009	Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
ASTM D 4449 : 1990 : R1999	Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance
ASTM E 1349 : 2006 : R2013	Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry
ASTM D 1535 : 2008 : EDT 1	Standard Practice for Specifying Color by the Munsell System
ASTM E 1345 : 1998 : R2014	Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
ASTM D 2244 : 2014	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 5531 : 1994 : R2003	Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
ASTM D 1729 : 1996 : R2003	Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
ASTM D 1535 : 2014 : R2018	Standard Practice for Specifying Color by the Munsell System
ASTM D 1535 : 2014	Standard Practice for Specifying Color by the Munsell System
ASTM D 2244 : 2005	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM E 1331 : 2004	Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E 1164 : 2012 : EDT 1	Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
ASTM D 1535 : 2008	Standard Practice for Specifying Color by the Munsell System
ASTM E 1164 : 1994	Standard Practice for Obtaining Spectrophotometric Data for Object-Color Evaluation
ASTM E 1345 : 1998 : R2019	Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
ASTM D 5531 : 2005	Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
ASTM E 1349 : 1990 : R1998	Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional Geometry
ASTM E 1349 : 2006	Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45:0 or 0:45) Geometry
ASTM D 1535 : 1997	Standard Practice for Specifying Color by the Munsell System
ASTM E 1360 : 1990 : R2000 : EDT 1	Standard Practice for Specifying Color by Using the Optical Society of America Uniform Color Scales System
ASTM D 5531 : 1994 : R1999	Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
ASTM D 1535 : 1989	Standard Test Method for Specifying Color by the Munsell System
ASTM D 2244 : 2007	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 1535 : 2000	Standard Practice for Specifying Color by the Munsell System
ASTM E 1541 : 1998 : R2003	Standard Practice for Specifying and Matching Color Using the Colorcurve System (Withdrawn 2007)
ASTM D 1729 : 1996	Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
ASTM D 4449 : 2015	Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance
ASTM E 1360 : 2005 : R2015	Standard Practice for Specifying Color by Using the Optical Society of America Uniform Color Scales System
ASTM E 1164 : 2002	Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
ASTM E 1331 : 2009	Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
ASTM E 1164 : 2012	Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
ASTM E 1360 : 2005	Standard Practice for Specifying Color by Using the Optical Society of America Uniform Color Scales System
ASTM D 1535 : 2012	Standard Practice for Specifying Color by the Munsell System
ASTM E 1345 : 1998	Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
ASTM D 2244 : 2009 : REV A	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 4449 : 2008	Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance
ASTM D 2244 : 1993 : R2000	Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates
ASTM E 1345 : 1998 : R2008 : EDT 1	Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
ASTM D 1535 : 2006	Standard Practice for Specifying Color by the Munsell System
ASTM D 1535 : 2001	Standard Practice for Specifying Color by the Munsell System
ASTM E 1349 : 2006 : R2018	Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry
ASTM E 1164 : 2012 : R2017 : EDT 1	Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
ASTM E 1345 : 1998 : R2003	Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
ASTM D 4449 : 1990 : R2004	Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance
ASTM E 1360 : 2005 : R2010	Standard Practice for Specifying Color by Using the Optical Society of America Uniform Color Scales System