Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

11-01-2019

Publisher

American Society for Testing and Materials

1.1This practice covers methods for the preparation of pieces of a rubber vulcanizate that is not in the form of sheet. Such pieces are used as a source from which specimens are obtained for testing.

1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	D 11
DocumentType	Standard Practice
Pages	3
PublisherName	American Society for Testing and Materials
Status	Current
Supersedes	ASTM D 3183 : 2010 : R2015 ASTM D 3183 : 2010 : R2015

ASTM D 572 : 2004 : R2019	Standard Test Method for Rubber—Deterioration by Heat and Oxygen
ASTM D 430 : 2006 : R2018	Standard Test Methods for Rubber Deterioration—Dynamic Fatigue
ASTM D 454 : 2004 : R2019	Standard Test Method for Rubber Deterioration by Heat and Air Pressure
ASTM D 925 : 2014 : R2019	Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion)
ASTM D 575 : 1991 : R2018	Standard Test Methods for Rubber Properties in Compression
ASTM D 865 : 2011 : R2018	Standard Test Method for Rubber—Deterioration by Heating in Air (Test Tube Enclosure)
ASTM D 395 : 2018	Standard Test Methods for Rubber Property—Compression Set
ASTM D 2632 : 2015 : R2019	Standard Test Method for Rubber Property—Resilience by Vertical Rebound
ASTM E 1783/E1783M : 1996 : R2017	Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
ASTM D 573 : 2004 : R2019	Standard Test Method for Rubber—Deterioration in an Air Oven
ASTM D 4289 : 2019	Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
ASTM D 3032 : 2016	Standard Test Methods for Hookup Wire Insulation
ASTM D 6284 : 2017	Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine
ASTM C 1187 : 2015	Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Fuel Storage Racks In a Pool Environment
ASTM D 2628 : 1991 : R2016	Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
ASTM D 624 : 2000 : R2012	Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
ASTM D 1460 : 1986 : R2014	Standard Test Method for Rubber Property—Change in Length During Liquid Immersion
ASTM D 413 : 1998 : R2017	Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate
ASTM D 2000 : 2018	Standard Classification System for Rubber Products in Automotive Applications
ASTM D 6515 : 2000 : R2016	Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM D 378 : 2010 : R2016	Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type
ASTM D 1056 : 2014	Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber
ASTM D 1456 : 1986 : R2014	Standard Test Method for Rubber Property—Elongation at Specific Stress
ASTM D 7121 : 2005 : R2018	Standard Test Method for Rubber Property—Resilience Using Schob Type Rebound Pendulum
ASTM D 471 : 2016 : REV A	Standard Test Method for Rubber Property—Effect of Liquids
ASTM D 412 : 2016	Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM F 1909 : 1998 : R2012	Standard Specification for Preformed Open–Cell Sponge Rubber Pail and Drum Gaskets
ASTM D 1052 : 2009 : R2019	Standard Test Method for Measuring Rubber Deterioration—Cut Growth Using Ross Flexing Apparatus
ASTM E 1612/E1612M : 1994 : R2017	Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
ASTM D 3004 : 2008 : R2013	Standard Specification for Crosslinked and Thermoplastic Extruded Semi-Conducting, Conductor and Insulation Shielding Materials
ASTM D 3667 : 2016	Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors
ASTM D 3903 : 2015	Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems
ASTM D 1148 : 2013 : R2018	Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces
ASTM D 380 : 1994 : R2019	Standard Test Methods for Rubber Hose
ASTM D 3832 : 1979 : R2017	Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems
ASTM D 4014 : 2003 : R2018	Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges
ASTM D 1330 : 2004 : R2015 : EDT 1	Standard Specification for Rubber Sheet Gaskets
ASTM D 750 : 2012 : R2017	Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus
ASTM D 3771 : 2015	Standard Specification for Rubber Seals Used in Concentrating Solar Collectors
ASTM D 3767 : 2003 : R2014	Standard Practice for Rubber—Measurement of Dimensions
ASTM G 74 : 2013	Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact

ASTM D 3182 : 1989 : R2001	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3182 : 2021	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3182 : 2016	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 3182 : 2021 : REV A	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets