Standard Practice for Rubber—Directions for Achieving Subnormal Test Temperatures

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

06-01-2018

Publisher

American Society for Testing and Materials

CONTAINED IN VOL. 09.01, 2015 Defines the general requirements for achieving and maintaining temperatures below 21 degrees C for thermal conditioning and physical testing of rubber.

1.1This practice covers the general requirements for achieving and maintaining temperatures below 21°C for thermal conditioning and physical testing of rubber.

1.2This practice describes the acceptable types and construction of low-temperature cabinets for conditioning and testing of rubber, the composition and circulation of heat-transfer media, and the required uniformity and precision of temperature control.

1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	D 11
DocumentType	Standard Practice
Pages	3
PublisherName	American Society for Testing and Materials
Status	Current
Supersedes	ASTM D 3847 : 2001 : R2012

ASTM D 2632 : 1996	Standard Test Method for Rubber Property—Resilience by Vertical Rebound
ASTM D 2240 : 2000	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 2137 : 2011 : R2018	Standard Test Methods for Rubber Property—Brittleness Point of Flexible Polymers and Coated Fabrics
ASTM D 2136 : 2002 : R2007	Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
ASTM D 2136 : 2019 : EDT 1	Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
ASTM D 1329 : 1988 : R1998	Standard Test Method for Evaluating Rubber Property-Retraction at Lower Temperatures (TR Test)
ASTM D 2137 : 1994 : R2000	Standard Test Methods for Rubber Property-Brittleness Point of Flexible Polymers and Coated Fabrics
ASTM D 2136 : 2002 : R2012	Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
ASTM D 1329 : 2008	Standard Test Method for Evaluating Rubber Property<span class='unicode'>—</span>Retraction at Lower Temperatures (TR Test)
ASTM D 945 : 2022	Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
ASTM D 1229 : 1987 : R1997 : EDT 1	Standard Test Method for Rubber Property-Compression Set at Low Temperatures
ASTM D 1415 : 2005	Standard Test Method for Rubber Property—International Hardness
ASTM E 197 : 1966	Specification for Enclosures and Servicing Units for Tests Above and Below Room Temperature
ASTM D 1229 : 2003 : R2008	Standard Test Method for Rubber Property-Compression Set at Low Temperatures
ASTM D 2632 : 2015	Standard Test Method for Rubber Property—Resilience by Vertical Rebound
ASTM D 1415 : 1988 : R1999	Standard Test Method for Rubber Property-International Hardness
ASTM D 1415 : 2018	Standard Test Method for Rubber Property—International Hardness
ASTM D 2136 : 1994 : R1998	Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
ASTM D 1415 : 1988 : R2004	Standard Test Method for Rubber Property—International Hardness
ASTM D 2240 : 2004	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1229 : 2003	Standard Test Method for Rubber Property—Compression Set at Low Temperatures
ASTM D 2632 : 2014	Standard Test Method for Rubber Property—Resilience by Vertical Rebound
ASTM D 2240 : 2004 : EDT 1	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1053 : 1992 : REV A : R2012	Standard Test Methods for Rubber Property—Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics
ASTM D 2632 : 2001	Standard Test Method for Rubber Property—Resilience by Vertical Rebound
ASTM D 2136 : 2002 : EDT 1	Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
ASTM D 832 : 2007 : R2018	Standard Practice for Rubber Conditioning For Low Temperature Testing
ASTM D 2632 : 2001 : R2014	Standard Test Method for Rubber Property—Resilience by Vertical Rebound
ASTM D 2137 : 2010	Standard Test Methods for Rubber Property-Brittleness Point of Flexible Polymers and Coated Fabrics
ASTM D 1053 : 1992 : REV A : R1997	Standard Test Methods for Rubber Property—Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics
ASTM D 2632 : 2015 : REDLINE	Standard Test Method for Rubber Property—Resilience by Vertical Rebound
ASTM D 2136 : 2002	Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
ASTM D 2137 : 2005	Standard Test Methods for Rubber Property-Brittleness Point of Flexible Polymers and Coated Fabrics
ASTM D 1415 : 1968	Standard Test Method for International Hardness Of Vulcanized Rubber
ASTM D 2240 : 2015 : R2021	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1415 : 1988 : R1994	Standard Test Method for Rubber Property-International Hardness
ASTM D 945 : 2016	Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
ASTM D 1229 : 2003 : R2019	Standard Test Method for Rubber Property—Compression Set at Low Temperatures
ASTM D 2240 : 2002	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1229 : 2003 : R2015	Standard Test Method for Rubber Property—Compression Set at Low Temperatures
ASTM D 2240 : 2015	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 2240 : 2003	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1329 : 2002	Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test)
ASTM D 1329 : 2016	Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test)
ASTM D 2240 : 2002 : REV B	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1053 : 1992 : REV A : R2001 : EDT 1	Standard Test Methods for Rubber Property—Stiffening at Low Temperatures Flexible Polymers and Coated Fabrics
ASTM D 1415 : 2006 : R2012	Standard Test Method for Rubber Property—International Hardness
ASTM D 1415 : 2006	Standard Test Method for Rubber Property—International Hardness
ASTM D 2240 : 2015 : EDT 1	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1329 : 2016 : REDLINE	Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test)
ASTM D 2240 : 2005	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 2240 : 2005 : R2010	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 2632 : 2015 : R2019	Standard Test Method for Rubber Property—Resilience by Vertical Rebound
ASTM D 1053 : 1992 : REV A : R2007	Standard Test Methods for Rubber Property-Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics
ASTM D 1053 : 1992 : REV A : R2018	Standard Test Methods for Rubber Property—Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics
ASTM D 2632 : 2001 : R2008	Standard Test Method for Rubber Property—Resilience by Vertical Rebound
ASTM D 2240 : 2002 : REV A	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 746 : 2014 : REDLINE	Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
ASTM D 945 : 2016 : REDLINE	Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
ASTM D 1329 : 2016 : R2021	Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test)
ASTM D 2136 : 2019	Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
ASTM D 2137 : 2011	Standard Test Methods for Rubber Property<char: emdash>Brittleness Point of Flexible Polymers and Coated Fabrics