ASTM D 3892 : 2015 : REDLINE
Current
The latest, up-to-date edition.
English
09-01-2015
CONTAINED IN VOL. 08.02, 2015 Defines the packaging and packing of all thermoset and thermoplastic resins and fabricated shapes.
Committee |
D 20
|
DocumentType |
Redline
|
Pages |
4
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
ASTM D 2673 : 2014 : REDLINE | Standard Specification for Oriented Polypropylene Film |
ASTM D 3840 : 2014 : REDLINE | SPECIFICATION FOR 'FIBERGLASS' (GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) PIPE FITTINGS FOR NONPRESSURE APPLICATIONS |
ASTM D 5436 : 2015 : REDLINE | Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes |
ASTM D 3517 : 2014 : REDLINE | Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe |
ASTM D 5047 : 2017 : REDLINE | Standard Specification for Polyethylene Terephthalate Film and Sheeting |
ASTM D 4801 : 2008 : R2016 | Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater |
ASTM D 3262 : 2016 : REDLINE | Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe |
ASTM D 6778 : 2014 : REDLINE | Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM) |
I.S. EN ISO 12086-1:2006 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
ASTM D 7471 : 2009 : R2014 | Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials |
ASTM D 4225 : 2003 | Standard Specification for Styrene-Butadiene Sheeting (Withdrawn 2009) |
ASTM D 6457 : 2008 | Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE) |
ASTM F 2207 : 2006 : R2013 | Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe |
ASTM D 4099 : 1995 | Standard Specification for Poly(Vinyl Choride)(PVC) Prime Windows and Sliding Glass Doors (Withdrawn 1999) |
ASTM D 5476 : 1999 | Standard Classification System for Thermoplastic Polyurethane Materials (TPU) (Withdrawn 2005) |
ASTM D 6835 : 2017 : REDLINE | Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE) |
ASTM D 6338 : 2017 : REDLINE | Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods |
ASTM D 1201 : 2013 : REDLINE | Standard Specification for Thermosetting Polyester Molding Compounds |
ASTM D 1784 : 2011 : REDLINE | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds |
ASTM D 7445 : 2018 : REDLINE | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding) |
ASTM D 3754 : 2014 : REDLINE | Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe |
ASTM D 7293 : 2012 : REDLINE | Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI) |
ASTM D 6783 : 2005 : R2011 | Standard Specification for Polymer Concrete Pipe |
ASTM D 6783 : 2005 | Standard Specification for Polymer Concrete Pipe |
ASTM D 1547 : 1981 | Specification for Extruded Acrylic Plastic Sheet (Withdrawn 1988) |
ASTM D 705 : 1999 : R2012 | Standard Specification for Urea-Formaldehyde Molding Compounds |
ASTM D 2952 : 1995 | Specification for Ethylene Plastics (Withdrawn 1999) |
ASTM D 2103 : 2015 : REDLINE | Standard Specification for Polyethylene Film and Sheeting |
ASTM D 6779 : 2017 : REDLINE | Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA) |
ASTM D 5927 : 2017 : REDLINE | Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods |
ASTM D 705 : 1999 : R2004 | Standard Specification for Urea-Formaldehyde Molding Compounds |
ASTM D 3368 : 2017 : REDLINE | Standard Specification for FEP Sheet and Film |
ASTM D 3308 : 2012 | Standard Specification for PTFE Resin Skived Tape |
ASTM D 705 : 1999 | Standard Specification for Urea-Formaldehyde Molding Compounds |
ASTM D 6865 : 2017 : REDLINE | Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM–Styrene (AES) Plastics and Alloys Molding and Extrusion Materials |
BS EN ISO 12086-1:2006 | Plastics. Fluoropolymer dispersions and moulding and extrusion materials Designation system and basis for specifications |
DIN EN ISO 12086-1:2006-05 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
I.S. EN ISO 12086-2:2006 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
ASTM D 4617 : 2003 | Standard Classification System for Phenolic Compounds (PF) (Withdrawn 2012) |
ASTM D 3222 : 2005 : R2015 | Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials |
ASTM D 1998 : 2015 : REDLINE | Standard Specification for Polyethylene Upright Storage Tanks |
ASTM D 7472 : 2009 : R2014 | Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials |
ASTM D 3295 : 2015 : REDLINE | Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing |
ASTM D 2341 : 1981 | Specification for Rigid Urethane Foam (Withdrawn 1988) |
ASTM D 7793 : 2017 : REDLINE | Standard Specification for Insulated Vinyl Siding |
ASTM D 1430 : 2017 : REDLINE | Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics |
ASTM D 704 : 1999 | Standard Specification for Melamine-Formaldehyde Molding Compounds |
ASTM D 788 : 2016 : REDLINE | Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds |
ASTM D 4097 : 2001 | Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks |
ASTM D 4396 : 2015 | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications |
ASTM D 6713 : 2014 : REDLINE | Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF) |
ASTM D 6098 : 2016 : REDLINE | Standard Classification System and Basis for Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC) |
ASTM D 1248 : 2016 : REDLINE | Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable |
(INACTIVE RECORD)ASTM D 5336 : 2015-04 | CLASSIFICATION SYSTEM AND BASIS FOR SPECIFICATION FOR POLYPHTHALAMIDE (PPA) INJECTION MOLDING MATERIALS |
ASTM D 4067 : 2016 : REDLINE | Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods |
ASTM D 5204 : 2017 : REDLINE | CLASSIFICATION SYSTEM FOR POLYAMIDE-IMIDE (PAI) MOLDING AND EXTRUSION MATERIALS |
ASTM D 4801 : 2008 | Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm [0.010 in.] and Greater |
ASTM D 3935 : 2015 : REDLINE | Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material |
ASTM D 5575 : 2007 : R2013 | Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers |
ASTM D 8065/D8065M : 2016 | Standard Classification System and Basis for Specification for Specifying Plastic Films |
ASTM D 3275 : 2008 : R2013 | Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials |
ASTM D 4441 : 2015 : REDLINE | Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene |
ASTM D 4000 : 2016 : REDLINE | Standard Classification System for Specifying Plastic Materials |
ASTM D 7436 : 2017 : REDLINE | Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology |
ASTM D 6262 : 2017 : REDLINE | Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK) |
ASTM D 5575 : 2007 | Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers |
ASTM D 3350 : 2014 : REDLINE | Standard Specification for Polyethylene Plastics Pipe and Fittings Materials |
ASTM D 3275 : 2008 | Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials |
ASTM D 3013 : 2013 : REDLINE | Standard Specification for Epoxy Molding Compounds |
ASTM D 5676 : 1999 | Standard Specification for Recycled Polystyrene Molding and Extrusion Materials (Withdrawn 2004) |
ASTM D 6457 : 2008 : R2013 | Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE) (Withdrawn 2018) |
ASTM D 3308 : 2012 : R2017 | Standard Specification for PTFE Resin Skived Tape |
ASTM D 2517 : 2018 : REDLINE | Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings |
ASTM D 3159 : 2015 : REDLINE | Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials |
ASTM D 704 : 1999 : R2004 | Standard Specification for Melamine-Formaldehyde Molding Compounds |
ASTM D 1249 : 1992 : R1999 | Standard Specification for Octyl Ortho-Phthalate Ester Plasticizers (Withdrawn 2007) |
ASTM D 2411 : 1989 | SPECIFICATION FOR CELLULOSE ACETATE BUTYRATE FILM AND SHEETING FOR FABRICATING AND FORMING |
ASTM D 3965 : 2016 : REDLINE | Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings |
ASTM D 6394 : 2014 : REDLINE | Standard Specification for Sulfone Plastics (SP) |
ASTM D 787 : 2012-08 | SPECIFICATION FOR ETHYL CELLULOSE MOLDING AND EXTRUSION COMPOUNDS |
ASTM D 5926 : 2015 : REDLINE | Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems |
ASTM D 2287 : 2012 : REDLINE | Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds |
ASTM D 4634 : 2016 : REDLINE | Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA) |
ASTM D 1763 : 2000 : R2005 | Standard Specification for Epoxy Resins |
ASTM D 2474 : 1992 | Specification for Vinyl Chloride Copolymer Resins (Withdrawn 1999) |
ASTM D 4549 : 2015 : REDLINE | Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS) |
ASTM D 3307 : 2016 : REDLINE | Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials |
ASTM D 6100 : 2017 : REDLINE | Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM) |
ASTM D 4551 : 2017 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane |
ASTM PS 93 : 1998 | Provisional Standard Specification for Fabricated Shapes and Finished Parts Fabricated From Polyimide Resins (Withdrawn 2001) |
ASTM D 7471 : 2009 | Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials |
ASTM D 729 : 1995 | Standard Specification for Vinylidene Chloride Molding Compounds (Withdrawn 2000) |
ASTM D 4673 : 2016 : REDLINE | Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials |
ASTM D 704 : 1999 : R2012 | Standard Specification for Melamine-Formaldehyde Molding Compounds |
ASTM D 1755 : 2015 : REDLINE | Standard Specification for Poly(Vinyl Chloride) Resins |
ASTM D 5593 : 1999 : EDT 1 | Standard Classification for Thermoplastic Elastomers-Olefinic (TEO) (Withdrawn 2005) |
ASTM D 7254 : 2017 : REDLINE | Standard Specification for Polypropylene (PP) Siding |
ASTM D 4203 : 2017 : REDLINE | Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials |
ASTM D 7193 : 2017 : REDLINE | Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
ASTM D 5857 : 2017 : REDLINE | Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology |
ASTM D 3841 : 2016 : REDLINE | Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels |
ASTM D 6339 : 2011 | Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS) |
ASTM D 6261 : 2014 : REDLINE | Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES) |
ASTM D 4349 : 2016 : REDLINE | Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials |
ASTM D 6783 : 2005 : REV A : R2017 | Standard Specification for Polymer Concrete Pipe |
ASTM D 4973 : 1993 | Specification for White Rigid Poly(Vinyl Chloride)(PVC) Insulating Storm Windows (Withdrawn 1999) |
EN ISO 12086-1:2006/AC:2007 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
UNI EN ISO 12086-2 : 2006 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
ASTM D 3753 : 2012-04 | SPECIFICATION FOR GLASS-FIBER-REINFORCED POLYESTER MANHOLES AND WETWELLS |
ASTM D 6712 : 2017 : REDLINE | Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes |
ASTM D 2116 : 2016 : REDLINE | Standard Specification for FEP Resin Molding and Extrusion Materials |
ASTM F 2207 : 2006 | Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe |
04/30091867 DC : DRAFT FEB 2004 | BS EN ISO 12086-1 - PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
ASTM D 6263 : 2015 : REDLINE | Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) |
ASTM D 1636 : 2013 : REDLINE | Standard Specification for Allyl Molding Compounds |
ASTM D 1710 : 2015 : REDLINE | Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes |
ASTM D 3222 : 2005 | Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials |
ASTM D 4397 : 2016 : REDLINE | Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications |
ASTM D 5205 : 2016 : REDLINE | Standard Classification System and Basis for Specification for Polyetherimide (PEI) Materials |
ASTM D 4969 : 2017 : REDLINE | Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric |
ASTM D 1562 : 2015 : REDLINE | Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds (CAP) |
ASTM D 707 : 2015 : REDLINE | Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB) |
ASTM D 3222 : 2005 : R2010 | Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials |
ASTM D 6585 : 2017 : REDLINE | Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
ASTM D 8033 : 2016 | Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials |
ASTM D 1593 : 2013 : REDLINE | Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting |
ASTM D 3679 : 2017 : REDLINE | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding |
ASTM D 4477 : 2016 : REDLINE | Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit |
ASTM D 1457 : 1992 | Specification for Polytetrafluorethylene (PTFE) Molding and Extrusion Materials (Withdrawn 1996) |
ASTM D 5021 : 2000 | Standard Specification for Thermoplastic Elastomer-Chlorinated Ethylene Alloy (TECEA) (Withdrawn 2007) |
GOST 849:2018 | Primary nickel. SpecificationsE |
BS EN ISO 12086-2:2006 | Plastics. Fluoropolymer dispersions and moulding and extrusion materials Preparation of test specimens and determination of properties |
ISO 12086-2:2006 | Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
ISO 12086-1:2006 | Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 1: Designation system and basis for specifications |
EN ISO 12086-2:2006/AC:2009 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
MIL-R-46198 Base Document:1988 | RESIN, POLYIMIDE, HOT PRESSED OR PRESSED AND SINTERED |
ASTM D 3678 : 2014 : REDLINE | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions |
ASTM D 4097 : 2001 : R2010 | Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks |
ASTM D 7472 : 2009 | Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials |
ASTM D 1788 : 1981 | Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Plastics (Withdrawn 1988) |
ASTM D 3294 : 2015 : REDLINE | Standard Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes |
ASTM D 1763:2000 | Standard Specification for Epoxy Resins |
ASTM D 5138 : 2016 : REDLINE | Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP) |
BS ISO 12086-1 : 1995 AMD 10638 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
ASTM D 4474 : 2000 | Standard Classification System for Styrenic Thermoplastic Elastomer Injection Molding and Extrusion Materials (TES) (Withdrawn 2008) |
04/30091870 DC : DRAFT FEB 2004 | BS EN ISO 12086-2 - PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
ASTM D 4066 : 2013 | Standard Classification System for Nylon Injection and Extrusion Materials (PA) |
ASTM D 706 : 2015 : REDLINE | Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA) |
ASTM D 1927 : 1981 : R1988 : EDT 1 | Specification for Rigid Poly (Vinyl Chloride) Plastic Sheet (Withdrawn 1994) |
ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
ASTM D 1763 : 2000 : R2013 | Standard Specification for Epoxy Resins |
ASTM D 5990 : 2000 | Standard Classification System for Polyketone Injection Molding and Extrusion Materials (PK) (Withdrawn 2007) |
ASTM D 3369 : 2001 | Standard Specification for Polytetrafluoroethylene (PTFE) Resin Cast Film (Withdrawn 2006) |
DIN EN ISO 12086-2:2006-05 | PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.