ASTM D 5118/D5118M : 2015 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Practice for Fabrication of Fiberboard Shipping Boxes
12-24-2015
English
10-01-2015
CONTAINED IN VOL. 15.10, 2016 Describes the fabrication of new fiberboard boxes, liners and sleeves.
1.1This practice covers the fabrication of new fiberboard boxes, liners and sleeves.
1.2This practice points out the factors and components that must be controlled in the manufacture of corrugated and solid fiberboard boxes, liners and sleeves.
1.3This practice does not cover the adequacy of fiberboard containers under all conditions of exposure to atmosphere, handling, shipping and storage.
1.4The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Committee |
D 10
|
| DevelopmentNote |
Supersedes PPP B 636 (07/2004)
|
| DocumentType |
Redline
|
| Pages |
19
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| Supersedes |
| ASTM D 1974/D1974M : 2016 : REDLINE | Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes |
| MIL-DTL-2845 Revision E:1999 | PROPULSION SYSTEMS, BOAT AND SHIP; MAIN SHAFTING, PROPELLERS, BEARINGS, GAUGES, SPECIAL TOOLS, AND ASSOCIATED REPAIR PARTS; PRESERVATION, PACKAGING, PACKING AND STORAGE OF |
| MIL-STD-290 Revision H:2013 | PACKAGING AND MARKING OF PETROLEUM AND RELATED PRODUCTS |
| MIL-DTL-12000 Revision K:2012 | CABLE, CORD, AND WIRE, ELECTRIC, PACKAGING OF |
| MIL-DTL-11922 Revision F:2016 | SCARF, BRANCH OF SERVICE, BIB TYPE |
| MIL H 26626 : D | HOSE ASSEMBLY, TETRAFLUOROETHYLENE, OXYGEN |
| MIL-DTL-32130 Base Document:2003 | UNDERWEAR, CHEMICAL PROTECTIVE, TWO PIECE (UNDERSHIRT AND DRAWERS) |
| MIL DTL 46746 : E | CARRIERS, COMMAND POST, LIGHT TRACKED: M577,M577A1,M577A2 AND M577A3: AND CARRIERS, COMMAND POST SYSTEM, STANDARDIZED INTEGRATED: M1068 AND M1068A;PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-DTL-44054 Revision C:2011 | BOTTLE: OIL SAMPLE; WITH CONTAINER, NONAERONAUTICAL |
| MIL-L-31007 Base Document:1994 | LINER, AIRCREW, BATTLEDRESS, UNIFORM (COAT AND TROUSERS) |
| MIL-STD-2073-1 Revision E:2008 | STANDARD PRACTICE FOR MILITARY PACKAGING |
| MIL-HDBK-773 Revision A:2005 | ELECTROSTATIC DISCHARGE PROTECTIVE PACKAGING |
| SAE AS 1710 : 2014 | COUPLING, FUEL, FLEXIBLE, VARIABLE CAVITY, THREADED TYPE WITH FERRULES |
| SAE AS 7768 : 2016 | LIGHT, DESK, AIRCRAFT |
| MIL-DTL-53126 Revision A:2012 | POWER DISTRIBUTION, ILLUMINATION SYSTEMS, ELECTRICAL, GENERAL SPECIFICATION FOR |
| MIL-DTL-45360 Revision J:2016 | CARRIERS, PERSONNEL, FULL-TRACKED, ARMORED: M113A2 AND M113A3; MORTARS, SELF-PROPELLED: M106A2 (107MM), M125A2 (81MM) AND M1064, M1064A3 (120MM); SMOKE GENERATORS: M1059, M1059A3 AND M58; PROCESSING FOR STORAGE AND SHIPMENT OF |
| JJ-N-180 Revision H:2015 | NETS, LAUNDRY |
| PPP-B-1672 Revision E:2013 | BOXES, SHIPPING, REUSABLE WITH CUSHIONING |
| MIL-DTL-197 Revision M:2016 | PACKAGING OF BEARINGS, ASSOCIATED PARTS AND SUBASSEMBLIES |
| MIL-DTL-62220 Revision C:1996 | RECOVERY VEHICLE, FULL-TRACKED, HEAVY, M88A2, PREPARATION FOR STORAGE AND SHIPMENT OF |
| MIL-DTL-39028 Revision F:2013 | CAPACITORS, PACKAGING OF |
| ASTM B 900 : 2016 : REDLINE | Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies |
| A-A-52070 Revision B:2017 | Cord, Plumb Bob |
| MIL-DTL-75 Revision K:2007 | ELECTRON TUBES, PACKAGING OF |
| MIL C 38271 : B | CONNECTOR, OXYGEN MASK TO REGULATOR CRU-60/P |
| MIL-DTL-39032 Revision E:2000 | RESISTORS, PACKAGING OF |
| MIL-DTL-16034 Revision B:2008 | METERS, ELECTRICAL-INDICATING (SWITCHBOARD AND PORTABLE TYPES), GENERAL SPECIFICATION FOR |
| SAE AS 7928 : 2011 | TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR |
| SAE AMS C 7438 : 2014 | CORE MATERIAL, ALUMINUM, FOR SANDWICH CONSTRUCTION |
| ASTM F 2511 : 2005 | Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid |
| A-A-50169 Revision B:2011 | Skin Protective Compounds, Chemical Barrier |
| MIL-DTL-32185 Base Document:2005 | TROUSERS, COLD WEATHER, UNIVERSAL CAMOUFLAGE |
| MIL-DTL-32184 Base Document:2005 | PARKA, COLD WEATHER, UNIVERSAL CAMOUFLAGE |
| MIL-DTL-32158 Base Document:2004 | TROUSERS, ALL-PURPOSE, ENVIRONMENTAL, CAMOUFLAGE |
| AA-B-2825 Base Document:1994 | BED, BUNK, STEEL, SQUARE TUBE, WITH END PANELS SINGLE AND DOUBLE-DECK |
| SAE AS 81824 : 2016 | SPLICE, ELECTRIC, CRIMP, COPPER, ENVIRONMENT RESISTANT |
| ASTM F 2511 : 2005 : EDT 1 | Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid |
| MIL-V-3 Revision E:1994 | VALVES, FITTINGS, AND FLANGES (EXCEPT FOR SYSTEMS INDICATED HEREIN); PACKAGING OF |
| MIL-DTL-28786 Revision D:2014 | SWITCHES, ELECTRICAL AND FIBER OPTIC, PACKAGING OF |
| MIL-H-44298 Revision C:1994 | HAM SLICES, CHUNKED AND FORMED, SMOKE FLAVORING ADDED, THERMOSTABILIZED, TRAY PACK |
| MIL-DTL-32235 Revision A:2010 | HEATER MODULE, GENERAL SPECIFICATION FOR |
| MIL-DTL-62327 Revision B:1985 | CARRIERS, ARMORED, FULL TRACKED, M901A1, AND M901A3 TOW VEHICLE (LESS TOW WEAPON) AND M981, AND M981A3 FISTV; PROCESSING FOR STORAGE AND SHIPMENT OF (METRIC) |
| MIL-PRF-44073 Revision H:2017 | Packaging of Food in Flexible Pouches |
| MIL P 197 : H | PACKAGING OF BEARINGS, ANTIFRICTION, ASSOCIATED PARTS AND SUBASSEMBLIES |
| ASTM D 4727/D4727M : 2017 : REDLINE | Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes |
| SAE AS 50141 : 2012 | TUBE, PNEUMATIC TIRE, AIRCRAFT |
| ASTM D 5639/D5639M :2011 | Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements |
| PIA T 43618 : C | TAPE, PRESSURE SENSITIVE, FOR MENDING NYLON PARACHUTE CANOPIES |
| CGSB 43.22 : 2001 CORR 1 2001 | CORRUGATED FIBREBOARD BOXES |
| MIL D 26392 : C | DUMMY CONVERTERS, LIQUID OXYGEN INDICATOR SYSTEM 10 LITER CRU-23/A AND 25 LITER CRU-24/A |
| MIL-C-42066 Revision A:2000 | CARRIER, LITTER, WHEELED |
| PPP-B-2920 Base Document:1997 | BOILERS AND RELATED EQUIPMENT, PACKAGING OF |
| MIL V 25961 : F | VALVE, FILL-BUILDUP-VENT, LIQUID OXYGEN CONVERTER, CRU-5O/A |
| MIL-DTL-6279 Revision M:2003 | PARKA, EXTREME COLD WEATHER, TYPE N-3B |
| SAE AS 6224 : 2015 | WRAP-AROUND INSULATION REPAIR AND PROTECTION SLEEVE, PERMANENT, ELECTRIC, ENVIRONMENT RESISTANT |
| SAE AS 23190 : 2015 | WIRING, POSITIONING, AND SUPPORT ACCESSORIES |
| ASTM D 4514 : 2012 : REDLINE | Standard Specification for Friction Tape |
| ASTM F 2511 : 2005 : R2013 | Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid |
| ASTM D 5639/D5639M : 2011 : R2015 | Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements |
| ASTM D 3950 : 2017 : REDLINE | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| ASTM D 3953 : 2015 : REDLINE | Standard Specification for Strapping, Flat Steel and Seals |
| A-A-59692 Base Document:2001 | ADHESIVE, WATER-RESISTANT (FOR CLOSURE OF FIBERBOARD BOXES) |
| ASTM D 996 : 2016 : REDLINE | Standard Terminology of Packaging and Distribution Environments |
| ASTM D 1974 : 1998 | Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes |
| FED-STD-123 Revision H:2007 | MARKING FOR SHIPMENT (CIVIL AGENCIES) |
| ASTM D 4727/D4727M : 2017 : REDLINE | Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes |
| TAPPI/ANSI T 402 sp:2013 | STANDARD CONDITIONING AND TESTING ATMOSPHERES FOR PAPER, BOARD, PULP HANDSHEETS, AND RELATED PRODUCTS |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.