ASTM D 522 : 1993 : REV A
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
Available format(s)
Hardcopy , PDF
Superseded date
11-11-2014
Language(s)
English
Published date
01-01-2001
CONTAINED IN VOL. 06.01, 2014 Establishes the cracking resistance of attached organic coatings on substrates of sheet metal or rubber type materials.
1.1 These test methods cover the determination of the resistance to cracking (flexibility) of attached organic coatings on substrates of sheet metal or rubber-type materials.
1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Committee |
D 01
|
| DevelopmentNote |
Supersedes ASTM D 1737. (12/2001)
|
| DocumentType |
Test Method
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
| ASTM D 7311 : 2007 | Standard Specification for Liquid-Applied, Single-Pack, Moisture-Triggered, Aliphatic Polyurethane Roofing Membrane |
| MIL-PRF-32239 Revision A:2014 | COATING SYSTEM, ADVANCED PERFORMANCE, FOR AEROSPACE APPLICATIONS |
| MIL PRF 62164 : C | SEMITRAILER, LOWBED, HEAVY EQUIPMENT TRANSPORTER, 60 TON, M747 |
| MIL-DTL-24607 Revision B:2008 | ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS |
| MIL-DTL-1115 Revision E:2010 | ENAMEL, INTERIOR, ALKYD, WHITE (FORMULA NO. 30) |
| A-A-3161 Base Document:1998 | PRIMER COATING, CONDITIONER FOR CHALKING EXTERIOR SURFACES |
| A-A-3067 Base Document:1996 | PAINT: ALKYD, EXTERIOR, LOW VOC |
| TT-P-1952 Revision F:2015 | PAINT, TRAFFIC AND AIRFIELD MARKING, WATERBORNE |
| A-A-3121 Revision A:2004 | PAINT, RUBBER-BASE: FOR INTERIOR USE (CONCRETE AND MASONRY FLOORS) |
| A-A-3120 Base Document:1997 | PAINT: FOR SWIMMING POOLS |
| MIL-DTL-11195 Revision H:2011 | Enamel, Lusterless, Fast Dry, VOC Compliant, (for use on Ammunition and Other Metals) |
| MIL-PRF-24763 Revision B:2009 | ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE |
| A-A-3054 Base Document:1996 | PAINT: HEAT RESISTING (204 DEGREES C) |
| MIL-B-36558 Revision B:1992 | BEDS, ADJUSTABLE |
| MIL-PRF-24712 Revision B:2014 | COATINGS, POWDER, THERMOSETTING |
| MIL-DTL-11414 Revision F:2013 | Primer Alkyd, Fast Dry, Corrosion Inhibiting, Lead and Chromate Free |
| MIL-PRF-22750 Revision G:2011 | COATING, EPOXY, HIGH-SOLIDS |
| A-A-3164 Revision A:2007 | SYNTHETIC LACQUER, CAMOUFLAGE, EXTERIOR, VOC COMPLIANT |
| MIL-DTL-24441 Revision D:2009 | PAINT, EPOXY-POLYAMIDE, GENERAL SPECIFICATION FOR |
| MIL-PRF-85322 Revision C:2014 | COATING, ELASTOMERIC, POLYURETHANE, RAIN-EROSION |
| MIL C 85322 : B | COATING ELASTOMERIC, POLYURETHANE, RAIN EROSION RESISTANT, FOR EXTERIOR AIRCRAFT USE |
| A-A-1452 Revision C:2007 | LACQUER (SPRAYING, CHEMICAL RESISTANT) |
| MIL-PRF-62488 Revision A:1997 | AMPLIFIER, AUDIO FREQUENCY |
| TT-C-00542 Revision F:1995 | COATING, POLYURETHANE, OIL-FREE, MOISTURE CURING |
| TT-P-645 Revision C:2013 | PAINT, ALKYD TYPE, FORMULA NUMBER 84 |
| ASTM D 6947 : 2007 | Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System |
| ASTM D 3322 : 1982 : R2001 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
| ASTM E 866 : 2011 : REDLINE | SPECIFICATION FOR CORROSION-INHIBITING ADHESIVE PRIMER FOR ALUMINIUM ALLOYS TO BE ADHESIVELY BONDED IN HONEYCOMB SHELTER PANELS |
| ASTM D 3214 : 1996 | Standard Test Methods for Coating Powders and Their Coatings Used for Electrical Insulation (Withdrawn 2002) |
| ASTM D 6905 : 2003 : R2012 | Standard Test Method for Impact Flexibility of Organic Coatings |
| ASTM D 6083 : 2005 | Standard Specification for Liquid Applied Acrylic Coating Used in Roofing |
| EN ISO 11439:2013 | Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013) |
| NACE RP 01 76 : 2003 | CORROSION CONTROL OF STEEL FIXED OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION |
| DOD-F-24610 Base Document:1982 | FIXANT, HOLD DOWN |
| MIL-DTL-53084 Revision B:2011 | Primer, Cathodic Electrodeposition, Chemical Agent Resistant |
| ASTM F 1178 : 2011 : R2015 | Standard Specification for Performance of Enameling System, Baking, Metal Joiner Work and Furniture |
| NASA SSTD 8070 0067 : 2004 | HIGH PRESSURE INDUSTRIAL WATER PIPING 'AG' |
| SAE AMS 3107 : 1983(R2014) | PRIMER, ADHESIVE, CORROSION-INHIBITING, FOR HIGH DURABILITY STRUCTURAL ADHESIVE BONDING |
| MIL-C-24782 Base Document:1993 | COATING, POWDERED FLUORPOLYMER FOR USE ON HIGH PRESSURE GAS FLASK INTERIORS |
| MIL-PRF-32348 Base Document:2010 | POWDER COATING, CAMOUFLAGE CHEMICAL AGENT RESISTANT SYSTEMS |
| DD ISO/TS 15869:2009 | Gaseous hydrogen and hydrogen blends. Land vehicle fuel tanks |
| A-A-52612 Revision A:2010 | BUSES, MOTOR: COMPACT, FORWARD CONTROL, 8600 TO 13 500 POUNDS GVW, 12, 16 AND 20 PASSENGER, 4X2 |
| SSPC-PAINT 24 : 2016 | LATEX EXTERIOR FINISH COAT FOR STEEL SURFACES, PERFORMANCE-BASED |
| DOD-P-24655 Base Document:1985 | PAINT, UNDERWATER HULL, ANTICORROSION (METRIC) |
| 15/30253325 DC : 0 | BS ISO 17519 - GAS CYLINDERS - REFILLABLE PERMANENTLY MOUNTED COMPOSITE TUBES FOR TRANSPORTATION |
| A-A-1788 Base Document:1997 | VARNISH, OIL: INTERIOR |
| MIL-DTL-53022 Revision C Interim Revision:2007 | PRIMER, EPOXY COATING, CORROSION INHIBITING LEAD AND CHROMATE FREE |
| TT-P-2756 Revision A:1996 | POLYURETHANE COATING - SELF-PRIMING TOPCOAT, LOW VOLATILE ORGANIC COMPOUND (VOC) CONTENT |
| MIL-DTL-53022 Revision E:2012 | PRIMER, EPOXY COATING, CORROSION INHIBITING LEAD AND CHROMATE FREE |
| MIL-PRF-81352 Revision C:2005 | COATINGS, AIRCRAFT TOUCH-UP |
| NACE SP 04 87 : 2007 | CONSIDERATIONS IN THE SELECTION AND EVALUATION OF RUST PREVENTIVES AND VAPOR CORROSION INHIBITORS FOR INTERIM (TEMPORARY) CORROSION PROTECTION |
| ASTM D 6905 : 2003 | Standard Test Method for Impact Flexibility of Organic Coatings |
| ASTM D 3322 : 1982 : R2011 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
| ASTM D 3322 : 1982 : R2005 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
| ASTM D 333 : 2001 : R2007 | Standard Guide for Clear and Pigmented Lacquers |
| ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
| NACE SP 01 08 : 2008 | CORROSION CONTROL OF OFFSHORE STRUCTURES BY PROTECTIVE COATINGS |
| DIN EN ISO 11439:2013-09 | Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013) |
| I.S. EN ISO 11439:2013 | GAS CYLINDERS - HIGH PRESSURE CYLINDERS FOR THE ON-BOARD STORAGE OF NATURAL GAS AS A FUEL FOR AUTOMOTIVE VEHICLES (ISO 11439:2013) |
| SAE AMS 3604 : 2015 | HEAT RESISTANT ALUMINIZED PAINT |
| AA-L-2931 Base Document:1997 | LOCKER, CLOTHING, STEEL, TWO DOOR |
| MIL C 81904 : B | COATING COMPOUND, THERMAL INSULATION, ABLATIVE |
| 16/30278559 DC : 0 | BS ISO 18796-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF CARBON STEEL PROCESS VESSELS - PART 1: TECHNICAL REQUIREMENTS |
| 04/102582 DC : 0 | ISO 15869-1 - GASEOUS HYDROGEN AND HYDROGEN BLENDS - LAND VEHICLE FUEL TANKS - PART 1: GENERAL REQUIREMENTS |
| A-A-2994 Base Document:1996 | PRIMER COATING, INTERIOR, FOR WALLS AND WOOD |
| 08/30180643 DC : DRAFT APRIL 2008 | BS ISO 15869-3 - GASEOUS HYDROGEN AND HYDROGEN BLENDS - LAND VEHICLE FUEL TANKS |
| MIL-DTL-62542 Revision C:1998 | BALL SCREW LINEAR ACTUATOR (BSLA) |
| MIL-DTL-53030 Revision B Interim Revision:2003 | Primer Coating, Epoxy, Water Based, Lead and Chromate Free |
| MIL-B-52489 Revision E:1987 | BARBED TAPE, CONCERTINA |
| SAE AMS F 24610 : 2016 | FIXANT, HOLD DOWN |
| MIL-DTL-53030 Revision D:2011 | Primer Coating, Epoxy, Water Based, Lead and Chromate Free |
| MIL-PRF-85285 Revision E:2012 | COATING: POLYURETHANE, AIRCRAFT AND SUPPORT EQUIPMENT |
| SSPC-PAINT 23 : 2013 | LATEX PRIMER FOR STEEL SURFACES, PERFORMANCE-BASED |
| ASTM D 6905 : 2003 : R2008 | Standard Test Method for Impact Flexibility of Organic Coatings |
| MIL-DTL-15090 Revision E:2010 | ENAMEL, EQUIPMENT, LIGHT GRAY, (NAVY FORMULA NO. 111) |
| ASTM D 3451 : 2006 : R2012 | Standard Guide for Testing Coating Powders and Powder Coatings |
| MIL C 24712 : A | COATINGS, POWDER (METRIC) |
| A-A-3165 Revision A:2007 | LACQUER, GLOSS, FOR AIRCRAFT USE |
| ASTM D 6694/D6694M : 2015 : REDLINE | Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems |
| ASTM D 6947/D6947M : 2016 : REDLINE | Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System |
| MIL-PRF-24635 Revision E:2009 | COATING SYSTEMS, WEATHER-RESISTANT, EXTERIOR USE |
| MIL PRF 45150 : K | CHASSIS, TRAILER, 2-WHEEL CART TYPE 1/4 TO 3-1/2 TON |
| ASTM D 3323 : 1980 : R1988 : EDT 1 | Guide for Testing Interior Solvent-Thinned Flat Wall Paints (Withdrawn 1993) |
| ASTM D 6083 : 2005 : EDT 1 | Standard Specification for Liquid Applied Acrylic Coating Used in Roofing (Withdrawn 2014) |
| ASTM D 3451 : 2006 | Standard Guide for Testing Coating Powders and Powder Coatings |
| ASTM D 333 : 2001 : R2013 | Standard Guide for Clear and Pigmented Lacquers |
| SSPC-PAINT 46 : 2015 | ELASTOMERIC, WATER BASED, HIGH BUILD, FLAT, PERFORMANCE-BASED COATING FOR MASONRY AND CONCRETE |
| ASTM D 4712 : 1987 : REV A : R1996 | Standard Guide for Testing Industrial Water-Reducible Coatings |
| NASA STD 6002 : 2008 | APPLYING DATA MATRIX IDENTIFICATION SYMBOLS ON AEROSPACE PARTS |
| CSA B51S1 : 2005 | SUPPLEMENT NO. 1 TO B51-03, BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE |
| MIL-PRF-24596 Revision B:2009 | COATING COMPOUNDS, NONFLAMING, FIRE-RESISTANT |
| ASTM D 2485 : 2018 : REDLINE | Standard Test Methods for Evaluating Coatings For High Temperature Service |
| BS EN ISO 16961:2015 | Petroleum, petrochemical and natural gas industries. Internal coating and lining of steel storage tanks |
| 10/30196135 DC : 0 | BS ISO 11515 - GAS CYLINDERS - REFILABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING |
| MIL C 22750 : F | COATING, EPOXY, VOC-COMPLIANT |
| MIL PRF 62049 : E NOTICE 1 | SEMITRAILER, VAN: FOR INSTALLATION OF SPECIAL EQUIPMENT, MILITARY DESIGN |
| SAE AMS 3143 : 2016 | POWDER COATING MATERIAL |
| MIL PRF 62013 : D | CARRIERS, FULL-TRACKED: M548A1 AND M730A1 |
| A-A-2867 Base Document:1995 | COATING, POLYURETHANE, SINGLE COMPONENT MOISTURE CURE, ALIPHATIC |
| ASTM D 3322 : 1982 : R1996 : EDT 1 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
| MIL-DTL-64159 Revision B:2011 | CAMOUFLAGE COATING, WATER DISPERSIBLE ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT |
| ASTM D 6763 : 2016 : REDLINE | Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents |
| ASTM D 4712 : 1987 : REV A : R2001 | Standard Guide for Testing Industrial Water-Reducible Coatings |
| CSA G401 : 2014 | CORRUGATED STEEL PIPE PRODUCTS |
| SAE AMS 3603 : 2002 | PROTECTIVE FILM, HIGH PERFORMANCE, POLYMERIC PRESSURE SENSITIVE ADHESIVE, FOR AIRCRAFT EXTERIOR APPLICATIONS |
| ASTM D 333 : 2001 | Standard Guide for Clear and Pigmented Lacquers |
| ASTM F 1178 : 2011 | Standard Specification for Performance of Enameling System, Baking, Metal Joiner Work and Furniture |
| ISO/TS 15869:2009 | Gaseous hydrogen and hydrogen blends Land vehicle fuel tanks |
| ASTM D 5324 : 2016 : REDLINE | Standard Guide for Testing Water-Borne Architectural Coatings |
| ISO 11515:2013 | Gas cylinders — Refillable composite reinforced tubes of water capacity between 450 L and 3000 L — Design, construction and testing |
| GOST 849:2018 | Primary nickel. SpecificationsE |
| ISO 16961:2015 | Petroleum, petrochemical and natural gas industries Internal coating and lining of steel storage tanks |
| UNE-EN ISO 11439:2013 | Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO/FDIS 11439:2013) |
| BS EN ISO 11439:2013 | Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
| EN ISO 16961:2015 | Petroleum, petrochemical and natural gas industries - Internal coating and lining of steel storage tanks (ISO 16961:2015) |
| MIL-PRF-62528 Revision B:2010 | REGULATOR, ENGINE GENERATOR: SOLID STATE 28 VOLT, DUAL CURRENT LIMIT, DIRECT CURRENT |
| MIL-DTL-62164 Revision E:2010 | SEMITRAILER, LOWBED, HEAVY EQUIPMENT TRANSPORTER, 60-TON, M747 |
| SAE USCAR 9 : 1998 | CLASSIFICATION SYSTEM FOR AUTOMOTIVE TOOLING, MACHINERY AND EQUIPMENT LOW VOC WATERBORNE PAINT SYSTEMS |
| TT-P-2760 Revision A:1994 | PRIMER COATING; POLYURETHANE, ELASTOMERIC |
| MIL-DTL-53039 Revision E:2013 | COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT |
| MIL-DTL-62013 Revision E:1998 | CARRIERS, FULL-TRACKED: M548A1 AND M730A1 |
| BS ISO 11515 : 2013 | GAS CYLINDERS - REFILLABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 450 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING |
| ASTM D 2454 : 2014-03 | PRACTICE FOR DETERMINING THE EFFECT OF OVERBAKING ON ORGANIC COATINGS |
| MIL-DTL-62049 Revision G:2010 | SEMITRAILER, VAN: FOR INSTALLATION OF SPECIAL EQUIPMENT, MILITARY DESIGN |
| SAE AMS 3144 : 2012 | PRIMER, ANODIC ELECTRODEPOSITION FOR AIRCRAFT APPLICATIONS |
| I.S. EN ISO 16961:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF STEEL STORAGE TANKS (ISO 16961:2015) |
| ASTM D 2932 : 1980 : R1988 : EDT 1 | Guide for Testing Exterior Solvent-Based House and Trim Coatings (Withdrawn 1993) |
| ASTM D 6577 : 2015 : REDLINE | Standard Guide for Testing Industrial Protective Coatings |
| ASTM D 6947 : 2007 : R2013 | Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System |
| ASTM D 3322 : 1982 : R2017 | Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
| ASTM D 4712 : 1987 : REV A : R2005 | Standard Guide for Testing Industrial Water-Reducible Coatings (Withdrawn 2014) |
| ASTM D 7270 : 2007 | Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings |
| ASTM D 3451 : 2006 : R2017 | Standard Guide for Testing Coating Powders and Powder Coatings |
| ASTM D 7270 : 2007 : R2013 | Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings |
| CSA B51 : 2014 | BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE |
| ISO 11439:2013 | Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
| UNI EN ISO 11439 : 2013 | GAS CYLINDERS - HIGH PRESSURE CYLINDERS FOR THE ON-BOARD STORAGE OF NATURAL GAS AS A FUEL FOR AUTOMOTIVE VEHICLES |
| AS ME A112.6.7:2010 | SANITARY FLOOR SINKS |
| ASME A112.6.7 : 2010 : R2015 | SANITARY FLOOR SINKS |
| ASTM D 1400 : 2000 | Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base (Withdrawn 2006) |
| ASTM D 823 : 1995 | Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels |
| ASTM D 1186 : 2001 | Standard Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base (Withdrawn 2006) |
US$66.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.