ASTM D 5363 : 2016
Current
Current
The latest, up-to-date edition.
Standard Specification for Anaerobic Single-Component Adhesives (AN)
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
04-01-2016
This specification covers single-component anaerobic adhesives suitable for locking, sealing, and retaining threaded or cylindrical assemblies.
1.1This specification covers single-component anaerobic adhesives suitable for locking, sealing, and retaining threaded or cylindrical assemblies. The adhesives are cured to a solid state when confined between closely fitting active metal surfaces.
1.2This specification is intended to be a means of classifying anaerobic adhesives. It is not intended for engineering design purposes.
1.3This specification is intended to replace Military Specifications MIL-S-22473, MIL-S-46163, and MIL-R-46082.
1.4The values stated in SI units are to be regarded as the standard.
1.5The following safety hazards caveat pertains only to the test methods portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Committee |
D 14
|
| DocumentType |
Standard
|
| Pages |
11
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
| ASTM D 4054 : 2019 | Standard Practice for Evaluation of New Aviation Turbine Fuels and Fuel Additives |
| ASTM D 4800 : 1994 : R2015 | Standard Guide for Classifying and Specifying Adhesives |
| ASTM D 6465 : 1999 : R2016 | Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants |
| ASTM D 1084 : 2016 : R2021 | Standard Test Methods for Viscosity of Adhesives |
| ASTM D 4800 : 1994 : R2015 | Standard Guide for Classifying and Specifying Adhesives |
| ASTM D 3951 : 2010 | Standard Practice for Commercial Packaging |
| ASTM D 5648 : 2001 | Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity) |
| ASTM D 5648 : 2001 : R2019 | Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity) |
| ASTM A 109/A109M : 2024 | Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled |
| ASTM D 2693 : 2007 | Standard Specification for Ethylene Glycol |
| ASTM D 1084 : 2008 | Standard Test Methods for Viscosity of Adhesives |
| ASTM B 36/B36M : 2018 | Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar |
| ASTM D 5649 : 2001 : R2008 | Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners |
| ASTM D 3951 : 1998 | Standard Practice for Commercial Packaging |
| ASTM B 209 : 2014 | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
| ASTM D 1193 : 1977 : R1983 : EDT 1 | Standard Specification for Reagent Water |
| ASTM D 5648 : 2001 : R2014 | Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity) |
| ASTM D 1084 : 2016 | Standard Test Methods for Viscosity of Adhesives |
| ASTM D 2693 : 1993 : R1997 | Standard Specification for Ethylene Glycol |
| ASTM D 439 : 1989 | Specification for Automotive Gasoline (Withdrawn 1990) |
| ASTM D 5657 : 2007 : R2014 | Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners |
| ASTM D 907 : 2015 | Standard Terminology of Adhesives |
| ASTM D 445 : 2021 : EDT 2 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) |
| ASTM D 445 : 2017 : REV A | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) |
| ASTM D 5649 : 1994 | Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners |
| ASTM D 5657 : 2001 | Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners |
| ASTM A 109/A109M : 2016 : R2018 | Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled |
| ASTM E 122 : 2017 : R2022 | Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process |
| ASTM E 122 : 2017 | Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process |
| ASTM D 3951 : 2015 | Standard Practice for Commercial Packaging |
| ASTM D 5657 : 2007 : R2023 | Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners |
| ASTM D 445 : 1988 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity) |
| ASTM D 4800 : 1994 : R1999 | Standard Guide for Classifying and Specifying Adhesives |
| ASTM D 3951 : 2018 | Standard Practice for Commercial Packaging |
| ASTM D 4562 : 2001 : R2013 | Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen |
| ASTM D 1193 : 2006 : R2011 | Standard Specification for Reagent Water |
| ASTM D 56 : 2021 : REV A | Standard Test Method for Flash Point by Tag Closed Cup Tester |
| ASTM D 3951 : 2018 : R2023 | Standard Practice for Commercial Packaging |
| ASTM B 36/B36M : 2023 | Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar |
| ASTM D 907 : 2015 : R2023 | Standard Terminology of Adhesives |
| ASTM B 633 : 2019 | Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel |
| ASTM D 56 : 2016 : REV A | Standard Test Method for Flash Point by Tag Closed Cup Tester |
| ASTM D 5649 : 2015 | Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners |
| ASTM D 445 : 2019 : REV A | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) |
| ASTM D 1193 : 1991 | Standard Specification for Reagent Water |
| ASTM D 5649 : 2015 : R2023 | Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners |
| ASTM D 2693 : 2022 | Standard Specification for Ethylene Glycol |
| ASTM D 4562 : 2001 | Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen |
| ASTM D 2693 : 2002 | Standard Specification for Ethylene Glycol |
| ASTM D 445 : 2019 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) |
| ASTM D 56 : 2021 | Standard Test Method for Flash Point by Tag Closed Cup Tester |
| ASTM B 633 : 2023 | Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel |
| ASTM D 445 : 2001 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity) |
| ASTM D 445 : 2024 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) |
| ASTM D 445 : 2021 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) |
| ASTM A 109/A109M : 1998 : REV A | Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled |
| ASTM D 5657 : 2007 | Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners |
| ASTM D 56 : 2022 | Standard Test Method for Flash Point by Tag Closed Cup Tester |
| ASTM D 4800 : 1994 : R2011 | Standard Guide for Classifying and Specifying Adhesives |
| ASTM D 1084 : 1997 | Standard Test Methods for Viscosity of Adhesives |
| ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
| ASTM D 1193 : 2006 | Standard Specification for Reagent Water |
| ASTM D 4800 : 1994 : R2005 | Standard Guide for Classifying and Specifying Adhesives |
| ASTM D 56 : 1987 | Standard Test Method for Flash Point by Tag Closed Tester |
| ASTM D 5657 : 1995 | Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners |
| ASTM D 445 : 2018 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) |
| ASTM D 4562 : 2001 : R2019 | Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen |
| ASTM D 1193 : 1999 | Standard Specification for Reagent Water |
| ASTM D 5648 : 2001 : R2008 | Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity) |
| ASTM D 4562 : 1990 : R1995 : EDT 1 | Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen |
| ASTM D 4562 : 2001 : R2007 | Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen |
| ASTM D 445 : 2021 : EDT 1 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) |
| ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
| ASTM D 4800 : 1994 : R2023 | Standard Guide for Classifying and Specifying Adhesives |
| ASTM D 2693 : 2007 : R2012 | Standard Specification for Ethylene Glycol (Withdrawn 2021) |
| ASTM D 5648 : 1994 | Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity) |
| ASTM D 445 : 2023 | Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) |
| ASTM D 5649 : 2001 | Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners |
| ASTM D 439 : 1985 : REV A | Standard Specification for Automotive Gasoline |
US$69.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.