• There are no items in your cart

ASTM D 5467/D5467M : 1997 : R2017

Current
Current

The latest, up-to-date edition.

Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2017

CONTAINED IN VOL. 15.03, 2017 Specifies the in-plane compressive properties of polymer matrix composite materials reinforced by high-modulus fibers in a sandwich beam configuration.

1.1This test method covers the in-plane compressive properties of polymer matrix composite materials reinforced by high-modulus fibers in a sandwich beam configuration. The composite material forms are limited to continuous-fiber composites of unidirectional orientation. This test procedure introduces compressive load into a thin skin bonded to a thick honeycomb core with the compressive load transmitted into the sample by subjecting the beam to four-point bending.

1.2This procedure is applicable primarily to laminates made from prepreg or similar product forms. Other product forms may require deviations from the test method.

1.3The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.3.1Within the text the inch-pound units are shown in brackets.

Note 1:Additional procedures for determining compressive properties of polymer matrix composites may be found in Test Methods D3410/D3410M and D695.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 30
DevelopmentNote
Supersedes ASTM D 5467 (06/03)
DocumentType
Test Method
Pages
10
ProductNote
Reconfirmed 2017
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM D 3171 : 1999 Standard Test Methods for Constituent Content of Composite Materials
ASTM D 883 : 2023 Standard Terminology Relating to Plastics
ASTM E 122 : 2017 : REDLINE Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
ASTM E 177 : 1990 : REV A : R1996 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E 177 : 2014 : REDLINE Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM D 2584 : 2002 Standard Test Method for Ignition Loss of Cured Reinforced Resins
ASTM E 456 : 2002 Standard Terminology for Relating to Quality and Statistics
ASTM D 3878 : 2002 : REV A Standard Terminology for Composite Materials
ASTM D 883 : 2024 Standard Terminology Relating to Plastics
ASTM D 3878 : 2023 Standard Terminology for Composite Materials
ASTM E 456 : 2013 : REV A : R2022 Standard Terminology Relating to Quality and Statistics
ASTM D 5229/D5229M : 2014-06 TEST METHOD FOR MOISTURE ABSORPTION PROPERTIES AND EQUILIBRIUM CONDITIONING OF POLYMER MATRIX COMPOSITE MATERIALS
ASTM E 1237 : 1993 : R1998 Standard Guide for Installing Bonded Resistance Strain Gages
ASTM D 3878 : 2015 Standard Terminology for Composite Materials
ASTM D 2584 : 2008 Standard Test Method for Ignition Loss of Cured Reinforced Resins
ASTM E 1434 : 2000 : R2013 Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases (Withdrawn 2015)
ASTM D 3878 : 2019 Standard Terminology for Composite Materials
ASTM D 3878 : 2000 Standard Terminology Composite Materials
ASTM D 2584 : 1994 Standard Test Method for Ignition Loss of Cured Reinforced Resins
ASTM D 883 : 2022 Standard Terminology Relating to Plastics
ASTM D 883 : 2020 : REV B Standard Terminology Relating to Plastics
ASTM D 3171 : 2011 Standard Test Methods for Constituent Content of Composite Materials
ASTM E 6 : 2002 Standard Terminology Relating to Methods of Mechanical Testing
ASTM D 2734 : 2023 Standard Test Methods for Void Content of Reinforced Plastics
ASTM D 2734 : 2016 Standard Test Methods for Void Content of Reinforced Plastics
ASTM D 792 : 2013 : REDLINE Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
ASTM E 456 : 2013 : REV A : R2017 : EDT 5 Standard Terminology Relating to Quality and Statistics
ASTM E 122 : 2017 : R2022 Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
ASTM E 122 : 2017 Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
ASTM D 3410/D3410M : 2016 : REDLINE Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM E 1471 : 1992 : R2008 Standard Guide for Identification of Fibers, Fillers, and Core Materials in Computerized Material Property Databases
ASTM D 3878 : 2003 : REV A Standard Terminology for Composite Materials
ASTM D 2584 : 2011 Standard Test Method for Ignition Loss of Cured Reinforced Resins
ASTM E 1237 : 1993 : R2009 Standard Guide for Installing Bonded Resistance Strain Gages
ASTM D 3878 : 2016 Standard Terminology for Composite Materials
ASTM E 1309 : 2000 Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases
ASTM E 1471 : 1992 : R1998 Standard Guide for Identification of Fibers, Fillers, and Core Materials in Computerized Material Property Databases
ASTM D 3410/D3410M : 2016 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM D 3878 : 2019 : REV A Standard Terminology for Composite Materials
ASTM D 3878 : 2020 : REV A Standard Terminology for Composite Materials
ASTM D 3878 : 1998 Standard Terminology Composite Materials
ASTM D 3171 : 2022 Standard Test Methods for Constituent Content of Composite Materials
ASTM D 3410/D3410M : 2016 : EDT 1 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM D 3878 : 2018 Standard Terminology for Composite Materials
ASTM E 1434 : 2000 Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases
ASTM D 3171 : 2009 Standard Test Methods for Constituent Content of Composite Materials
ASTM D 3878 : 2002 Standard Terminology for Composite Materials
ASTM E 6 : 2015 : EDT 3 Standard Terminology Relating to Methods of Mechanical Testing
ASTM D 3878 : 2020 : REV B Standard Terminology for Composite Materials
ASTM E 1237 : 1993 : R2003 Standard Guide for Installing Bonded Resistance Strain Gages
ASTM E 1471 : 1992 : R2014 Standard Guide for Identification of Fibers, Fillers, and Core Materials in Computerized Material Property Databases (Withdrawn 2015)
ASTM D 2584 : 1968 Standard Method Of Test For Ignition Loss Of Cured Reinforced Resins
ASTM D 2734 : 2016 : REDLINE Standard Test Methods for Void Content of Reinforced Plastics
ASTM E 6 : 2023 : REV A Standard Terminology Relating to Methods of Mechanical Testing
ASTM D 3171 : 2015 : REDLINE Standard Test Methods for Constituent Content of Composite Materials
ASTM D 3878 : 2004 Standard Terminology for Composite Materials
ASTM E 4 : 2021 Standard Practices for Force Calibration and Verification of Testing Machines
ASTM E 1237 : 1993 : R2014 Standard Guide for Installing Bonded Resistance Strain Gages
ASTM D 2734 : 1994 Standard Test Methods for Void Content of Reinforced Plastics
ASTM D 3878 : 2007 : R2013 Standard Terminology for Composite Materials
ASTM E 1309 : 2000 : R2011 Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases (Withdrawn 2015)
ASTM D 3878 : 2020 : REDLINE Standard Terminology for Composite Materials
ASTM D 695 : 2015 Standard Test Method for Compressive Properties of Rigid Plastics
ASTM D 3878 : 2020 Standard Terminology for Composite Materials
ASTM D 2584 : 2018 Standard Test Method for Ignition Loss of Cured Reinforced Resins
ASTM E 111 : 2017 : REDLINE Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus
ASTM E 1471 : 1992 : R2004 Standard Guide for Identification of Fibers, Fillers, and Core Materials in Computerized Material Property Databases
ASTM D 3878 : 2003 Standard Terminology for Composite Materials
ASTM E 6 : 2015 : EDT 4 : REDLINE Standard Terminology Relating to Methods of Mechanical Testing
ASTM D 3878 : 2007 Standard Terminology for Composite Materials
ASTM D 2734 : 2009 Standard Test Methods for Void Content of Reinforced Plastics
ASTM D 3171 : 1999 : R2004 Standard Test Methods for Constituent Content of Composite Materials
ASTM D 695 : 2015 : REDLINE Standard Test Method for Compressive Properties of Rigid Plastics
ASTM E 1309 : 2000 : R2005 Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases
ASTM E 6 : 2015 : EDT 4 Standard Terminology Relating to Methods of Mechanical Testing
ASTM D 695 : 2023 Standard Test Method for Compressive Properties of Rigid Plastics
ASTM D 3171 : 2015 Standard Test Methods for Constituent Content of Composite Materials
ASTM E 6 : 2023 Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 456 : 2013 : REV A : R2017 : EDT 4 Standard Terminology Relating to Quality and Statistics
ASTM E 456 : 2013 : REV A : R2017 : EDT 6 Standard Terminology Relating to Quality and Statistics
ASTM D 3878 : 2004 : REV A Standard Terminology for Composite Materials
ASTM D 3171 : 2006 Standard Test Methods for Constituent Content of Composite Materials
ASTM E 1434 : 2000 : R2006 Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases
ASTM D 3878 : 2001 Standard Terminology Composite Materials

View more information
US$63.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.