ASTM D 5681 : 2018
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Terminology for Waste and Waste Management
Available format(s)
Hardcopy , PDF
Superseded date
02-01-2020
Language(s)
English
Published date
11-01-2018
This terminology contains standard definitions of terms used in the general area of waste and waste management.
1.1This terminology contains standard definitions of terms used in the general area of waste and waste management. It is intended to promote understanding by providing precise technical definitions of terms used in the standards developed by Committee D34 and its subcommittees.
1.2Terms used only within an individual standard, and having a meaning unique to that standard, may be defined or explained in the terminology section of that individual standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Committee |
D 34
|
| DocumentType |
Reference Material
|
| Pages |
18
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM D 7858 : 2013 : R2018 | Standard Test Method for Determination of Bisphenol A in Soil, Sludge, and Biosolids by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry |
| ASTM D 6323 : 2019 | Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities |
| ASTM D 5058 : 2012 : R2020 | Standard Practices for Compatibility of Screening Analysis of Waste |
| ASTM D 8018 : 2015 : R2020 | Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Soil by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS) |
| ASTM D 5283 : 2018 | Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Quality Assurance and Quality Control Planning and Implementation |
| ASTM D 6956 : 2017 | Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use |
| ASTM D 8155 : 2017 | Standard Practice for Shake Extraction of Solid Mining and Metallurgical Processing Waste with Water |
| ASTM D 6346 : 2017 | Standard Guide for Accepting, Segregating, and Packaging Materials Collected Through Household Hazardous Waste Programs |
| ASTM D 8187 : 2018 | Standard Guide for Interpretation of Standard Humidity Cell Test Results |
| ASTM D 6009 : 2012 | Standard Guide for Sampling Waste Piles |
| ASTM D 4844 : 2016 | Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection |
| ASTM D 5658 : 2013 | Standard Practice for Sampling Unconsolidated Waste From Trucks |
| ASTM E 777 : 2017 : REV A | Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Refuse-Derived Fuel |
| ASTM D 8064 : 2016 | Standard Test Method for Elemental Analysis of Soil and Solid Waste by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams |
| ASTM E 791 : 2008 : R2016 | Standard Test Method for Calculating Refuse-Derived Fuel Analysis Data from As-Determined to Different Bases |
| ASTM D 8018 : 2015 | Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Soil by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS) |
| ASTM D 6661 : 2017 | Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling |
| ASTM D 7353 : 2007 : R2013 | Standard Practice for Sampling of Liquids in Waste Management Activities Using a Peristaltic Pump |
| ASTM D 3987 : 2012 | Standard Practice for Shake Extraction of Solid Waste with Water |
| ASTM D 5759 : 2012 | Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses |
| ASTM D 4981 : 2019 | Standard Practice for Screening of Oxidizers in Waste |
| ASTM D 4979 : 2019 | Standard Practice for Physical Description Screening Analysis in Waste |
| ASTM E 953/E953M : 2016 | Standard Practice for Fusibility of Refuse-Derived Fuel (RDF) Ash |
| ASTM D 6009 : 2019 | Standard Guide for Sampling Waste Piles |
| ASTM D 5232 : 2019 | Standard Practice for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material |
| ASTM D 6538 : 2012 : R2019 | Standard Guide for Sampling Wastewater With Automatic Samplers |
| ASTM D 7831 : 2013 | Standard Practice for Sampling of Tanks by Field Personnel |
| ASTM E 778 : 2015 | Standard Test Methods for Nitrogen in Refuse-Derived Fuel Analysis Samples |
| ASTM D 5057 : 2017 | Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste |
| ASTM D 5232 : 2013 | Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material |
| ASTM D 6759 : 2016 | Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers |
| ASTM D 7204 : 2015 | Standard Practice for Sampling Waste Streams on Conveyors |
| ASTM D 6699 : 2016 | Standard Practice for Sampling Liquids Using Bailers |
| ASTM D 6538 : 2012 | Standard Guide for Sampling Wastewater With Automatic Samplers |
| ASTM E 790 : 2015 | Standard Test Method for Residual Moisture in Refuse-Derived Fuel Analysis Samples |
| ASTM D 5058 : 2012 | Standard Practices for Compatibility of Screening Analysis of Waste |
| ASTM D 6907 : 2005 : R2016 | Standard Practice for Sampling Soils and Contaminated Media with Hand-Operated Bucket Augers |
| ASTM D 7203 : 2011 : R2017 | Standard Practice for Screening Trichloroethylene (TCE)-Contaminated Media Using a Heated Diode Sensor (Withdrawn 2022) |
| ASTM E 1109 : 2019 | Standard Test Method for Determining the Bulk Density of Solid Waste Fractions |
| ASTM D 4547 : 2015 | Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds |
| ASTM D 6700 : 2019 | Standard Guide for Use of Scrap Tires as Tire-Derived Fuel |
| ASTM E 775 : 2015 | Standard Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel |
| ASTM D 5831 : 2017 | Standard Practice for Screening Fuels in Soils |
| ASTM D 6270 : 2017 | Standard Practice for Use of Scrap Tires in Civil Engineering Applications |
| ASTM D 4646 : 2016 | Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments |
| ASTM E 1266 : 2012 | Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications |
| ASTM D 5792 : 2010 : R2015 | Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives |
| ASTM D 5198 : 2017 | Standard Practice for Nitric Acid Digestion of Solid Waste |
| ASTM E 829 : 2016 | Standard Practice for Preparing Refuse-Derived Fuel (RDF) Laboratory Samples for Analysis |
| ASTM E 1528 : 2006 | Standard Practice for Limited Environmental Due Diligence: Transaction Screen Process |
| ASTM D 6063 : 2011 : R2018 | Standard Guide for Sampling of Drums and Similar Containers by Field Personnel |
| ASTM E 1138 : 1989 | Terminology of Technical Aspects of Products Liability Litigation (Withdrawn 1995) |
| ASTM D 6982 : 2009 : R2016 | Standard Practice for Detecting Hot Spots Using Point-Net (Grid) Search Patterns |
| ASTM D 4646 : 2003 : R2008 | Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments |
| ASTM D 5956 : 1996 : R2006 | Standard Guide for Sampling Strategies for Heterogeneous Wastes (Withdrawn 2015) |
| ASTM D 4439 : 2020 | Standard Terminology for Geosynthetics |
| ASTM D 6051 : 1996 : R2006 | Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities (Withdrawn 2015) |
| ASTM D 5679 : 1995 : REV A : R2006 | Standard Practice for Sampling Consolidated Solids in Drums or Similar Containers |
| ASTM D 5744 : 2007 : EDT 1 | Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell |
| ASTM D 4448 : 2001 : R2019 | Standard Guide for Sampling Ground-Water Monitoring Wells |
| ASTM D 4439 : 2015 | Standard Terminology for Geosynthetics |
| ASTM D 5745 : 1995 : R1999 | Standard Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation |
| ASTM D 5369 : 1993 : R2008 : EDT 1 | Standard Practice for Extraction of Solid Waste Samples for Chemical Analysis Using Soxhlet Extraction (Withdrawn 2016) |
| ASTM D 5679 : 1995 : REV A | Standard Practice for Sampling Consolidated Solids in Drums or Similar Containers |
| ASTM D 5285 : 1992 : R1997 | Standard Test Method for 24-Hour Batch-Type Measurement of Volatile Organic Sorption by Soils and Sediments |
| ASTM E 1528 : 2014 | Standard Practice for Limited Environmental Due Diligence: Transaction Screen Process |
| ASTM D 6842 : 2002 | Standard Guide for Designing Cost-Effective Sampling and Measurement Plans by Use of Estimated Uncertainty and Its Components in Waste Management Decision-Making |
| ASTM D 6700 : 2001 : R2013 | Standard Practice for Use of Scrap Tire-Derived Fuel |
| ASTM D 1129 : 2003 | Standard Terminology Relating to Water |
| ASTM D 5746 : 1998 | Standard Classification of Environmental Condition of Property Area Types for Defense Base Closure and Realignment Facilities |
| ASTM D 5744 : 2013 | Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell |
| ASTM D 6700 : 2001 : R2006 | Standard Practice for Use of Scrap Tire-Derived Fuel |
| ASTM D 6270 : 2017 | Standard Practice for Use of Scrap Tires in Civil Engineering Applications |
| ASTM D 5368 : 1993 : R2006 | Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples |
| ASTM D 4547 : 2009 | Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds |
| ASTM D 6063 : 1996 : R2006 | Standard Guide for Sampling of Drums and Similar Containers by Field Personnel |
| ASTM D 1129 : 2013 | Standard Terminology Relating to Water |
| ASTM D 6982 : 2009 | Standard Practice for Detecting Hot Spots Using Point-Net (Grid) Search Patterns |
| ASTM D 6346 : 1998 | Standard Guide for Accepting, Segregating and Packaging Materials Collected Through Household Hazardous Waste Programs |
| ASTM D 6982 : 2003 | Standard Practice for Detecting Hot Spots and Buried Objects Using Point-Net (Grid) Search Patterns |
| ASTM D 6346 : 1998 : R2004 | Standard Guide for Accepting, Segregating and Packaging Materials Collected Through Household Hazardous Waste Programs |
| ASTM D 4448 : 1985 : REV A : R1992 | Standard Guide for Sampling Ground-Water Monitoring Wells |
| ASTM D 6538 : 2010 | Standard Guide for Sampling Wastewater With Automatic Samplers |
| ASTM D 5231 : 1992 : R2008 | Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste |
| ASTM D 6661 : 2001 : R2006 | Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling |
| ASTM D 6323 : 2012 | Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities |
| ASTM D 4448 : 2001 : R2013 | Standard Guide for Sampling Ground-Water Monitoring Wells |
| ASTM D 5120 : 1990 : R1995 : EDT 1 | Standard Test Method for Inhibition of Respiration in Microbial Cultures in the Activated Sludge Process |
| ASTM D 4646 : 1987 : R1993 | Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments |
| ASTM D 6008 : 1996 | Standard Practice for Conducting Environmental Baseline Surveys |
| ASTM D 5231 : 1992 : R1998 | Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste |
| ASTM D 6044 : 1996 : R2009 | Standard Guide for Representative Sampling for Management of Waste and Contaminated Media |
| ASTM D 5660 : 1996 : R2004 | Standard Test Method for Assessing the Microbial Detoxification of Chemically Contaminated Water and Soil Using a Toxicity Test with a Luminescent Marine Bacterium |
| ASTM D 4790 : 2007 | Standard Terminology of Aromatic Hydrocarbons and Related Chemicals |
| ASTM D 6044 : 1996 : R2003 | Standard Guide for Representative Sampling for Management of Waste and Contaminated Media |
| ASTM D 5745 : 2015 | Standard Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation |
| ASTM D 4448 : 2001 : R2007 | Standard Guide for Sampling Ground-Water Monitoring Wells |
| ASTM D 1129 : 2006 | Standard Terminology Relating to Water |
| ASTM D 6759 : 2002 | Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers |
| ASTM D 6044 : 1996 : R2015 | Standard Guide for Representative Sampling for Management of Waste and Contaminated Media |
| ASTM D 6759 : 2016 | Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers |
| ASTM D 6538 : 2012 : R2019 | Standard Guide for Sampling Wastewater With Automatic Samplers |
| ASTM D 6063 : 2011 | Standard Guide for Sampling of Drums and Similar Containers by Field Personnel |
| ASTM D 6250 : 1998 : R2009 | Standard Practice for Derivation of Decision Point and Confidence Limit for Statistical Testing of Mean Concentration in Waste Management Decisions (Withdrawn 2018) |
| ASTM D 5744 : 1996 | Standard Test Method for Accelerated Weathering of Solid Materials Using a Modified Humidity Cell |
| ASTM D 5369 : 1993 : R1998 | Standard Practice for Extraction of Solid Waste Samples for Chemical Analysis Using Soxhlet Extraction |
| ASTM D 5792 : 2002 | Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives |
| ASTM D 5743 : 1997 : R2003 | Standard Practice for Sampling Single or Multilayered Liquids, With or Without Solids, in Drums or Similar Containers |
| ASTM D 4439 : 2011 | Standard Terminology for Geosynthetics |
| ASTM D 5120 : 1990 : R2009 | Standard Test Method for Inhibition of Respiration in Microbial Cultures in the Activated Sludge Process (Withdrawn 2014) |
| ASTM D 4646 : 2003 | Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments |
| ASTM D 5744 : 2012 | Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell |
| ASTM D 4874 : 1995 : R2001 | Standard Test Method for Leaching Solid Material in a Column Apparatus |
| ASTM D 5468 : 2002 : R2007 | Standard Test Method for Gross Calorific and Ash Value of Waste Materials (Withdrawn 2016) |
| ASTM D 4439 : 2015 : REV A | Standard Terminology for Geosynthetics |
| ASTM D 4547 : 2015 | Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds |
| ASTM D 6270 : 1998 | Standard Practice for Use of Scrap Tires in Civil Engineering Applications |
| ASTM D 5285 : 2003 | Standard Test Method for 24-Hour Batch-Type Measurement of Volatile Organic Sorption by Soils and Sediments (Withdrawn 2008) |
| ASTM E 1528 : 2000 | Standard Practice for Environmental Site Assessments: Transaction Screen Process |
| ASTM D 6842 : 2002 : R2007 | Standard Guide for Designing Cost-Effective Sampling and Measurement Plans by Use of Estimated Uncertainty and Its Components in Waste Management Decision-Making (Withdrawn 2015) |
| ASTM D 6270 : 2008 | Standard Practice for Use of Scrap Tires in Civil Engineering Applications |
| ASTM D 4547 : 1998 | Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds |
| ASTM E 1248 : 1990 : R2004 | Standard Practice for Shredder Explosion Protection |
| ASTM D 5468 : 1995 | Standard Test Method for Gross Calorific and Ash Value of Waste Materials |
| ASTM D 6051 : 1996 : R2001 | Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities |
| ASTM D 6311 : 1998 : R2014 | Standard Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design |
| ASTM D 5369 : 1993 : R2003 | Standard Practice for Extraction of Solid Waste Samples for Chemical Analysis Using Soxhlet Extraction |
| ASTM D 5792 : 2010 | Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives |
| ASTM D 1129 : 1999 : REV A | Standard Terminology Relating to Water |
| ASTM D 4439 : 2002 | Standard Terminology for Geosynthetics |
| ASTM E 1527 : 2005 | Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process |
| ASTM E 1527 : 2013 | Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process |
| ASTM D 1129 : 2006 : REV A | Standard Terminology Relating to Water |
| ASTM D 6051 : 1996 | Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities |
| ASTM D 5679 : 2016 | Standard Practice for Sampling Consolidated Solids in Drums or Similar Containers |
| ASTM D 6008 : 1996 : R2005 | Standard Practice for Conducting Environmental Baseline Surveys |
| ASTM D 6661 : 2017 | Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling |
| ASTM E 1266 : 1988 : R2005 | Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications |
| ASTM D 5660 : 1996 | Standard Test Method for Assessing the Microbial Detoxification of Chemically Contaminated Water and Soil Using a Toxicity Test with a Luminescent Marine Bacterium |
| ASTM D 5743 : 1997 : R2008 | Standard Practice for Sampling Single or Multilayered Liquids, With or Without Solids, in Drums or Similar Containers |
| ASTM D 1129 : 2003 : REV A | Standard Terminology Relating to Water |
| ASTM D 1129 : 2002 | Standard Terminology Relating to Water |
| ASTM D 5745 : 1995 : R2005 | Standard Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation |
| ASTM D 5746 : 1998 : R2016 | Standard Classification of Environmental Condition of Property Area Types for Defense Base Closure and Realignment Facilities |
| ASTM D 4790 : 1999 | Standard Terminology of Aromatic Hydrocarbons and Related Chemicals |
| ASTM D 5120 : 1990 : R2004 | Standard Test Method for Inhibition of Respiration in Microbial Cultures in the Activated Sludge Process |
| ASTM D 6661 : 2010 | Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling |
| ASTM D 4439 : 2017 | Standard Terminology for Geosynthetics |
| ASTM D 5680 : 1995 : REV A : R2001 | Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers |
| ASTM D 5368 : 2013 | Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples (Withdrawn 2014) |
| ASTM D 6051 : 2015 | Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities |
| ASTM D 6538 : 2000 : R2005 | Standard Guide for Sampling Wastewater With Automatic Samplers |
| ASTM D 6063 : 1996 : R2001 | Standard Guide for Sampling of Drums and Similar Containers by Field Personnel |
| ASTM D 6323 : 2012 : EDT 1 | Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities (Withdrawn 2018) |
| ASTM D 5744 : 2013 : EDT 1 | Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell |
| ASTM D 5746 : 1998 : R2002 | Standard Classification of Environmental Condition of Property Area Types for Defense Base Closure and Realignment Facilities |
| ASTM D 6311 : 1998 | Standard Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design |
| ASTM D 5660 : 1996 : R2009 | Standard Test Method for Assessing the Microbial Detoxification of Chemically Contaminated Water and Soil Using a Toxicity Test with a Luminescent Marine Bacterium (Withdrawn 2014) |
| ASTM D 5743 : 1997 | Standard Practice for Sampling Single or Multilayered Liquids, With or Without Solids, in Drums or Similar Containers |
| ASTM D 6956 : 2017 | Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use |
| ASTM D 5792 : 2010 : R2015 | Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives |
| ASTM D 6346 : 2017 | Standard Guide for Accepting, Segregating, and Packaging Materials Collected Through Household Hazardous Waste Programs |
| ASTM D 5368 : 1993 | Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples |
| ASTM D 6582 : 2000 | Standard Guide for Ranked Set Sampling: Efficient Estimation of a Mean Concentration in Environmental Sampling |
| ASTM D 6582 : 2000 : R2005 | Standard Guide for Ranked Set Sampling: Efficient Estimation of a Mean Concentration in Environmental Sampling |
| ASTM D 6323 : 1998 | Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities |
| ASTM D 6538 : 2012 | Standard Guide for Sampling Wastewater With Automatic Samplers |
| ASTM D 1129 : 2004 | Standard Terminology Relating to Water |
| ASTM D 6250 : 1998 : R2003 | Standard Practice for Derivation of Decision Point and Confidence Limit for Statistical Testing of Mean Concentration in Waste Management Decisions |
| ASTM D 4790 : 2011 | Standard Terminology of Aromatic Hydrocarbons and Related Chemicals |
| ASTM E 1248 : 1990 : R1997 | Standard Practice for Shredder Explosion Protection |
| ASTM D 6759 : 2007 | Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers |
| ASTM E 1266 : 1988 : R1999 | Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications |
| ASTM D 4439 : 2001 | Standard Terminology for Geosynthetics |
| ASTM E 1527 : 2000 | Standard Practice for Environmental Site Assessments: Phase 1 Environmental Site Assessment Process |
| ASTM D 4874 : 1995 : R2006 | Standard Test Method for Leaching Solid Material in a Column Apparatus |
| ASTM D 5680 : 2010 | Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers |
| ASTM D 4439 : 2014 | Standard Terminology for Geosynthetics |
| ASTM D 5956 : 1996 : R2001 | Standard Guide for Sampling Strategies for Heterogeneous Wastes |
| ASTM D 4790 : 2014 | Standard Terminology of Aromatic Hydrocarbons and Related Chemicals |
| ASTM D 5368 : 1993 : R2001 | Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples |
| ASTM D 6956 : 2003 | Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use |
| ASTM D 5231 : 1992 : R2003 | Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste |
| ASTM D 6842 : 2002 : EDT 1 | Standard Guide for Designing Cost-Effective Sampling and Measurement Plans by Use of Estimated Uncertainty and Its Components in Waste Management Decision-Making |
| ASTM D 6250 : 1998 | Standard Practice for Derivation of Decision Point and Confidence Limit for Statistical Testing of Mean Concentration in Waste Management Decisions |
| ASTM D 1129 : 2002 : REV A | Standard Terminology Relating to Water |
| ASTM D 5468 : 2002 | Standard Test Method for Gross Calorific and Ash Value of Waste Materials |
| ASTM D 6700 : 2001 | Standard Practice for Use of Scrap Tire-Derived Fuel |
| ASTM E 1248 : 1990 : R2017 | Standard Practice for Shredder Explosion Protection |
| ASTM D 4439 : 2004 | Standard Terminology for Geosynthetics |
| ASTM D 4547 : 2003 | Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds |
| ASTM D 5231 : 1992 : R2016 | Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste |
| ASTM D 6270 : 2008 : R2012 | Standard Practice for Use of Scrap Tires in Civil Engineering Applications |
| ASTM D 6582 : 2000 : R2005 : EDT 1 | Standard Guide for Ranked Set Sampling: Efficient Estimation of a Mean Concentration in Environmental Sampling (Withdrawn 2012) |
| ASTM D 5743 : 1997 : R2013 | Standard Practice for Sampling Single or Multilayered Liquids, With or Without Solids, in Drums or Similar Containers |
| ASTM D 6044 : 1996 | Standard Guide for Representative Sampling for Management of Waste and Contaminated Media |
| ASTM D 5745 : 2009 | Standard Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation |
| ASTM D 6538 : 2000 | Standard Guide for Sampling Wastewater With Automatic Samplers |
| ASTM D 4646 : 1987 : R2001 | Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments |
| ASTM D 5746 : 1998 : R2010 | Standard Classification of Environmental Condition of Property Area Types for Defense Base Closure and Realignment Facilities |
| ASTM D 6759 : 2009 | Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers |
| ASTM D 5759 : 1995 | Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses |
| ASTM D 5680 : 2014 | Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers |
| ASTM D 5744 : 2007 | Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell |
| ASTM D 4448 : 2001 | Standard Guide for Sampling Ground-Water Monitoring Wells |
| ASTM E 1528 : 2014 : EDT 1 | Standard Practice for Limited Environmental Due Diligence: Transaction Screen Process |
| ASTM D 6700 : 2019 | Standard Guide for Use of Scrap Tires as Tire-Derived Fuel |
| ASTM D 4646 : 2016 | Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments |
| ASTM D 1129 : 2010 | Standard Terminology Relating to Water |
| ASTM D 6311 : 1998 : R2009 | Standard Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design |
| ASTM D 5792 : 1995 | Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives |
| ASTM D 4439 : 2000 | Standard Terminology for Geosynthetics |
| ASTM D 1129 : 2006 : REV A : EDT 1 | Standard Terminology Relating to Water |
| ASTM D 1129 : 2001 | Standard Terminology Relating to Water |
| ASTM D 5679 : 1995 : REV A : R2012 | Standard Practice for Sampling Consolidated Solids in Drums or Similar Containers |
| ASTM D 6346 : 1998 : R2009 | Standard Guide for Accepting, Segregating and Packaging Materials Collected Through Household Hazardous Waste Programs |
| ASTM D 1129 : 2004 : EDT 1 | Standard Terminology Relating to Water |
| ASTM D 6538 : 2000 : R2005 : EDT 1 | Standard Guide for Sampling Wastewater With Automatic Samplers |
| ASTM D 5956 : 2015 | Standard Guide for Sampling Strategies for Heterogeneous Wastes |
| ASTM D 4874 : 1995 : R2014 | Standard Test Method for Leaching Solid Material in a Column Apparatus (Withdrawn 2021) |
| ASTM D 5744 : 2018 | Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell |
| ASTM D 6008 : 1996 : R2014 | Standard Practice for Conducting Environmental Baseline Surveys |
| ASTM E 1248 : 1990 : R2009 | Standard Practice for Shredder Explosion Protection |
| ASTM E 1266 : 2012 | Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications |
| ASTM E 1528 : 1996 | Standard Practice for Limited Environmental Due Diligence: Transaction Screen Process |
| ASTM D 5680 : 1995 : REV A | Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers |
| ASTM D 5956 : 1996 | Standard Guide for Sampling Strategies for Heterogeneous Wastes |
| ASTM D 4874 : 1995 | Standard Test Method for Leaching Solid Material in a Column Apparatus |
| ASTM D 4439 : 2018 | Standard Terminology for Geosynthetics |
| ASTM D 6311 : 1998 : R2003 | Standard Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design |
| ASTM D 5759 : 2012 | Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses |
| ASTM E 1527 : 1997 | Standard Practice for Environmental Site Assessments: Phase 1 Environmental Site Assessment Process |
| ASTM D 6956 : 2011 | Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use |
| ASTM D 5792 : 2002 : R2006 | Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives |
| ASTM D 4547 : 2006 | Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds |
| ASTM D 6063 : 1996 : EDT 1 | Standard Guide for Sampling of Drums and Similar Containers by Field Personnel |
| ASTM D 6270 : 2008 : EDT 1 | Standard Practice for Use of Scrap Tires in Civil Engineering Applications |
| ASTM D 6661 : 2001 | Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling |
| ASTM D 5679 : 1995 : REV A : R2001 | Standard Practice for Sampling Consolidated Solids in Drums or Similar Containers |
US$83.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.