ASTM D 596 : 2001 : R2018
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
08-20-2018
CONTAINED IN VOL. 11.01, 2018 Gives guidelines for reporting inorganic and organic results of analyses of drinking water, waste water, process water, ground water, and surface water, and so forth, to laboratory clients in a complete and systematic fashion.
1.1This guide provides guidelines for reporting inorganic and organic results of analyses of drinking water, waste water, process water, ground water, and surface water, and so forth, to laboratory clients in a complete and systematic fashion.
1.2The reporting of bacterial and radiological data are not addressed in this guide.
1.3The commonly used data qualifiers for reviewing and reporting information are listed and defined. Client and laboratory specific requirements may make use of other qualifiers. This guide does not preclude the use of other data qualifiers.
1.4This guide discusses procedures for and specific problems in the reporting of low level data, potential errors (Type I and Type II), and reporting data that are below the calculated method detection limit and above the analyte.
1.5The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Committee |
D 19
|
DocumentType |
Guide
|
Pages |
6
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
SupersededBy | |
Supersedes |
ASTM D 3976 : 1992 | PRACTICE FOR PREPARATION OF SEDIMENT SAMPLES FOR CHEMICAL ANALYSIS |
ASTM D 6697 : 2001 | Standard Test Method for Determination for Chemical Oxygen Demand (Manganese III Oxygen Demand) of Water (Withdrawn 2010) |
ASTM D 5754 : 1995 : R2006 | Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements<char: emdash>Trilinear Diagrams for Two or More Analyses (Withdrawn 2015) |
ASTM D 2910 : 1985 | Method for Removal of Organic Matter from Water by Activated Carbon Absorption (Withdrawn 1991) |
ASTM D 3975 : 1993 : R2003 | Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments |
ASTM D 5738 : 1995 : R2006 | Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements<char: emdash>Diagrams for Single Analyses (Withdrawn 2015) |
ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
ASTM D 6036 : 1996 : R2008 | Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements<char: emdash>Use of Maps |
ASTM D 3976 : 1992 : R2001 | Standard Practice for Preparation of Sediment Samples for Chemical Analysis |
ASTM D 3976 : 1992 : R2005 | Standard Practice for Preparation of Sediment Samples for Chemical Analysis |
ASTM D 3976 : 1992 : R2010 | Standard Practice for Preparation of Sediment Samples for Chemical Analysis |
ASTM D 5612 : 1994 : R2003 | Standard Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program |
ASTM D 6328 : 2012-11 | GUIDE FOR QUALITY ASSURANCE PROTOCOLS FOR CHEMICAL ANALYSIS OF ATMOSPHERIC WET DEPOSITION |
ASTM D 3975 : 1993 : R2008 | Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments |
ASTM D 1067 : 2016 : REDLINE | Standard Test Methods for Acidity or Alkalinity of Water |
ASTM D 3975 : 1993 : R2014 | Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments |
ASTM D 5612 : 1994 : R2018 | Standard Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program |
ASTM D 3975 : 1993 : R1999 | Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments |
ASTM D 5877 : 1995 : R2005 | Standard Guide for Displaying Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements<char: emdash>Diagrams Based on Data Analytical Calculations (Withdrawn 2014) |
ASME PV CODE 7 : 2017 | BPVC Section VII-BOILER AND PRESSURE VESSEL CODE - RECOMMENDED GUIDELINES FOR THE CARE OF POWER BOILERS |
ASTM D 5738 : 1995 : R2000 | Standard Guide for Displaying the Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements-Diagrams for Single Analyses |
ASTM D 5612 : 1994 : R2013 | Standard Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program |
ASTM D 5612 : 1994 : R2008 | Standard Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program |
ASTM D 5877 : 1995 : R2000 | Standard Guide for Displaying Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements-Diagrams Based on Data Analytical Calculations |
ASTM D 6036 : 1996 : R2014 | Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements—Use of Maps (Withdrawn 2023) |
ASTM D 5952 : 2008 | Standard Guide for the Inspection of Water Systems for Legionella and the Investigation of Possible Outbreaks of Legionellosis (Legionnaires' Disease or Pontiac Fever) |
ASTM D 5952 : 2008 : R2015 | Standard Guide for the Inspection of Water Systems for Legionella and the Investigation of Possible Outbreaks of Legionellosis (Legionnaires' Disease or Pontiac Fever) (Withdrawn 2024) |
ASTM D 3976 : 1992 : R2015 | Standard Practice for Preparation of Sediment Samples for Chemical Analysis |
ASTM D 5612 : 1994 : R1998 | Standard Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program |
ASTM D 5754 : 1995 : R2000 | Standard Guide for Displaying the Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements-Trilinear Diagrams for Two or More Analyses |
ASTM D 6036 : 1996 : R2002 | Standard Guide for Displaying the Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements—Use of Maps |
ASTM D 3976 : 1992 : R1996 | Standard Practice for Preparation of Sediment Samples for Chemical Analysis |
ASME PTC31 : 2011 | PERFORMANCE TEST CODES - HIGH-PURITY WATER TREATMENT SYSTEMS |
ASME PTC31 : 2011 : R2017 | PERFORMANCE TEST CODES - HIGH-PURITY WATER TREATMENT SYSTEMS |
ASTM D 4840 : 1999 : R2018 : EDT 1 | Standard Guide for Sample Chain-of-Custody Procedures |
ASTM D 6091 : 2007 | Standard Practice for 99 %/95 % Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error |
ASTM D 4460 : 1997 : R2015 | Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods |
ASTM D 4840 : 1999 | Standard Guide for Sampling Chain-of-Custody Procedures |
ASTM D 1129 : 2013 : REDLINE | Standard Terminology Relating to Water |
ASTM D 1129 : 2003 | Standard Terminology Relating to Water |
ASTM D 2777 : 2013 : REDLINE | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ASTM E 29 : 2013 : R2019 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
ASTM D 5792 : 2010 : R2023 | Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives |
ASTM D 1129 : 2013 | Standard Terminology Relating to Water |
ASTM D 1129 : 2013 : R2020 | Standard Terminology Relating to Water |
ASTM D 4460 : 1997 | Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods |
ASTM D 2777 : 2012 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ASTM E 29 : 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
ASTM D 1129 : 2013 : R2020 : EDT 2 | Standard Terminology Relating to Water |
ASTM D 4460 : 1997 : R2005 | Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods |
ASTM D 1129 : 2006 | Standard Terminology Relating to Water |
ASTM D 2777 : 2003 | Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water |
ASTM D 2777 : 2021 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ASTM D 5792 : 2002 | Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives |
ASTM D 2777 : 2013 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ASTM D 2777 : 1998 | Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water |
ASTM D 1129 : 2013 : R2020 : EDT 1 | Standard Terminology Relating to Water |
ASTM D 5792 : 2010 | Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives |
ASTM D 1129 : 1999 : REV A | Standard Terminology Relating to Water |
ASTM D 3856 : 2011 | Standard Guide for Management Systems in Laboratories Engaged in Analysis of Water |
ASTM D 1129 : 2006 : REV A | Standard Terminology Relating to Water |
ASTM D 1129 : 2003 : REV A | Standard Terminology Relating to Water |
ASTM D 1129 : 2002 | Standard Terminology Relating to Water |
ASTM D 3856 : 1995 : R2006 | Standard Guide for Good Laboratory Practices in Laboratories Engaged in Sampling and Analysis of Water |
ASTM D 5792 : 2010 : R2015 | Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives |
ASTM D 4460 : 1997 : R2004 | Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods |
ASTM D 1129 : 2004 | Standard Terminology Relating to Water |
ASTM D 2777 : 2008 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ASTM D 3856 : 2011 : R2015 | Standard Guide for Management Systems in Laboratories Engaged in Analysis of Water (Withdrawn 2024) |
ASTM D 2777 : 2006 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ASTM D 6091 : 2003 | Standard Practice for 99 %/95 % Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error |
ASTM D 3856 : 1995 : R2000 | Standard Guide for Good Laboratory Practices in Laboratories Engaged in Sampling and Analysis of Water |
ASTM D 1129 : 2002 : REV A | Standard Terminology Relating to Water |
ASTM D 6091 : 2007 : R2014 | Standard Practice for 99 %/95 % Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error (Withdrawn 2023) |
ASTM D 4460 : 2022 | Standard Practice for Calculating Precision Limits Where Values Are Calculated from Other Test Methods |
ASTM D 4460 : 2022 : REV A | Standard Practice for Calculating Precision Limits Where Values Are Calculated from Other Test Methods |
ASTM D 4460 : 1997 : R2009 | Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods |
ASTM D 1129 : 2010 | Standard Terminology Relating to Water |
ASTM D 4210 : 1989 : R1996 : EDT 1 | Standard Practice for Intralaboratory Quality Control Procedures and a Discussion on Reporting Low-Level Data (Withdrawn 2002) |
ASTM D 5792 : 1995 | Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives |
ASTM D 1129 : 2006 : REV A : EDT 1 | Standard Terminology Relating to Water |
ASTM D 1129 : 2001 | Standard Terminology Relating to Water |
ASTM D 1129 : 2004 : EDT 1 | Standard Terminology Relating to Water |
ASTM D 2777 : 2008 : EDT 1 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ASTM D 5792 : 2002 : R2006 | Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives |
ASTM D 6091 : 1997 | Standard Practice for 99 %/95 % Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error |
ASTM E 29 : 2022 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.