• There are no items in your cart

ASTM D 610 : 2008

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces
Available format(s)

Hardcopy , PDF

Superseded date

11-11-2014

Language(s)

English

Published date

02-01-2008

CONTAINED IN VOL. 06.01, 2017 Deals with the evaluation of the degree of rusting on painted steel surfaces.

1.1 This practice covers the evaluation of the degree of rusting on painted steel surfaces. The visual examples which depict the percentage of rusting given in the written specifications form part of the standard. In the event of a dispute, the written definition prevails. These visual examples were developed in cooperation with SSPC: The Society for Protective Coatings to further standardization of methods. The photographs can be used to estimate the percentage of other coating defects on various substrates. This standard does not include evaluation of rust propagation around an initially prepared scribe, score, or holiday.

1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 01
DocumentType
Test Method
Pages
6
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 6695 : 2016 : REDLINE Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
ASTM D 6675 : 2001 : R2015 Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel
SDI A250.3 : 2007(R2011) TEST PROCEDURE AND ACCEPTANCE CRITERIA FOR - FACTORY APPLIED FINISH COATINGS FOR STEEL DOORS AND FRAMES
MIL-E-52891 Revision B:1988 ENAMEL, LUSTERLESS, ZINC PHOSPHATE, STYRENATED ALKYD TYPE
MIL-PRF-62284 Revision B:2009 BLOWER ASSEMBLY, AIR CLEANER
A-A-3132 Revision A:2003 COATING SYSTEM: EPOXY PRIMER/URETHANE TOPCOAT FOR MINIMALLY PREPARED ATMOSPHERIC STEEL
TT-P-664 Revision D:1988 PRIMER, COATING, ALKYD, CORROSION INHIBITING, LEAD AND CHROMATE FREE, VOC COMPLIANT
MIL-PRF-32584 Base Document:2017 Deck Covering Materials, Monolithic
13/30285580 DC : 0 BS EN ISO 16961 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL PROTECTIVE COATING AND LINING OF ABOVE GROUND STEEL STORAGE TANKS
SSPC-GUIDE 19 : 2012 SELECTION OF PROTECTIVE COATINGS FOR USE OVER GALVANIZED SUBSTRATES
ASTM D 6675 : 2001 : R2011 Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel
MIL-DTL-11414 Revision F:2013 Primer Alkyd, Fast Dry, Corrosion Inhibiting, Lead and Chromate Free
MIL-PRF-22750 Revision G:2011 COATING, EPOXY, HIGH-SOLIDS
MIL-STD-193 Revision L:1991 PAINTING PROCEDURES AND MARKING FOR VEHICLES, CONSTRUCTION EQUIPMENT, MATERIAL HANDLING EQUIPMENT, AND SPARE PARTS
A-A-3130 Revision A:2003 PAINT (FOR APPLICATION TO WET SURFACES)
MIL-PRF-32171 Revision B:2009 DECK COATINGS, HIGH DURABILITY
MIL P 53030 : A PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD & CHROMATE FREE
ASTM D 7376 : 2010 Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals
ASTM D 2248 : 2001 Standard Practice for Detergent Resistance of Organic Finishes
ASTM D 3322 : 1982 : R2001 Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
ASTM F 3019/F3019M : 2014 Standard Specification for Chromium Free Zinc-Flake Composite, with or without Integral Lubricant, Corrosion Protective Coatings for Fasteners
ASTM D 3451 : 2006 : R2017 Standard Guide for Testing Coating Powders and Powder Coatings
ASTM F 2833 : 2011 Standard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type
ASTM D 7868 : 2013 Standard Practice for Determining the Dry Fall (Fog) Properties of Protective Coatings
ASTM D 2248 : 2001 : REV A : R2007 Standard Practice for Detergent Resistance of Organic Finishes
ASTM D 5163 : 2016 : REDLINE Standard Guide for Establishing a Program for Condition Assessment of Coating Service Level I Coating Systems in Nuclear Power Plants
ASTM D 7868 : 2013 : R2017 Standard Practice for Determining the Dry Fall (Fog) Properties of Protective Coatings
ASTM D 7893 : 2013 Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products
ASTM D 2248 : 2001 : REV A : R2018 Standard Practice for Detergent Resistance of Organic Finishes
ASTM B 895 : 2016 : REDLINE Standard Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (PM) Parts/Specimens by Immersion in a Sodium Chloride Solution
ASTM D 7376 : 2010 : REV A : R2016 Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals
ASTM D 5894 : 2016 : REDLINE Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
ASTM F 2833 : 2011 : R2017 Standard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type
ASTM G 198 : 2017 : REDLINE Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood
ASTM D 1654 : 2008 : R2016 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
I.S. EN ISO 4628-3:2016 PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 3: ASSESSMENT OF DEGREE OF RUSTING (ISO 4628-3:2016)
MIL PRF 62180 : D SEMITRAILER, FUEL TANKERS: 5000 GALLON, BULKHAUL, AUTOMOTIVE AND AIRCRAFT FUEL SERVICING
NACE RP 02 81 : 2004 METHOD FOR CONDUCTING COATING (PAINT) PANEL EVALUATION TESTING IN ATMOSPHERIC EXPOSURES
MIL-DTL-53084 Revision B:2011 Primer, Cathodic Electrodeposition, Chemical Agent Resistant
MIL P 11414 : E PRIMER COATING, LACQUER, RUST INHIBITING
MIL P 53022 : B PRIMER, EPOXY COATING, CORROSION INHIBITING, LEAD & CHROMATE FREE
DIN 53210:1978-02 DESIGNATION OF DEGREE OF RUSTING OF PAINT SURFACES
MIL-DTL-62180 Revision E:1998 SEMITRAILER, FUEL TANKERS: 5000 GALLON, BULKHAUL, AUTOMOTIVE AND AIRCRAFT FUEL SERVICING
14/30301162 DC : 0 BS EN ISO 4628-3 - PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 3: ASSESSMENT OF DEGREE OF RUSTING
DOD-P-24555 Base Document:1977 PAINT, ALUMINUM, HEAT-RESISTING (650 DEGREE C), LOW-EMISSIVITY (0.40 OR LESS) (METRIC)
MIL P 52995 : 0 PRIMER COATING, SYNTHETIC, CORROSION INHIBITING, LACQUER RESISTING, LEAD AND CHROMATE FREE
SSPC-PAINT 24 : 2016 LATEX EXTERIOR FINISH COAT FOR STEEL SURFACES, PERFORMANCE-BASED
MIL E 11195 : E ENAMEL, LUSTERLESS, FAST DRY, VOC COMPLAINT
AASHTO M 300 : 2003 SPECIFICATION FOR INORGANIC ZINC-RICH PRIMER
MIL P 53084 : 0 PRIMER, CATHODIC ELECTRODEPOSITION, CHEMICAL AGENT RESISTANT
MIL-DTL-53022 Revision C Interim Revision:2007 PRIMER, EPOXY COATING, CORROSION INHIBITING LEAD AND CHROMATE FREE
MIL-DTL-53022 Revision E:2012 PRIMER, EPOXY COATING, CORROSION INHIBITING LEAD AND CHROMATE FREE
IEEE 1895:2014 BELOW-GRADE INSPECTION AND ASSESSMENT OF CORROSION ON STEEL TRANSMISSION, DISTRIBUTION, AND SUBSTATION STRUCTURES
ASTM D 3322 : 1982 : R2011 Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
ASTM D 3322 : 1982 : R2005 Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
UNE-EN ISO 4628-3:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016)
ASTM D 2248 : 2001 : REV A : R2013 Standard Practice for Detergent Resistance of Organic Finishes
ASTM D 333 : 2001 : R2007 Standard Guide for Clear and Pigmented Lacquers
ASTM D 1654 : 2008 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
ASTM D 345 : 2002 Side bearings of the freight wagon bogies. General specifications
DIN EN ISO 4628-1:2016-07 PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 1: GENERAL INTRODUCTION AND DESIGNATION SYSTEM (ISO 4628-1:2016)
DIN EN ISO 4628-3:2016-07 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016); German version EN ISO 4628-3:2016
I.S. EN ISO 4628-1:2016 PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 1: GENERAL INTRODUCTION AND DESIGNATION SYSTEM (ISO 4628-1:2016)
BS 3900-H3(2003) : 2003 PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 3: ASSESSMENT OF DEGREE OF RUSTING
MIL-DTL-6054 Revision G:2007 DRUM, METAL-SHIPPING AND STORAGE
BS 3900-H3:1983 Methods of test for paints. Evaluation of paint and varnish defects Designation of degree of rusting
MIL-PRF-32049 Base Document:1999 PALLET, FIELD ARTILLERY PROJECTILE
MIL-DTL-53030 Revision B Interim Revision:2003 Primer Coating, Epoxy, Water Based, Lead and Chromate Free
MIL-DTL-53030 Revision D:2011 Primer Coating, Epoxy, Water Based, Lead and Chromate Free
SSPC-PAINT 23 : 2013 LATEX PRIMER FOR STEEL SURFACES, PERFORMANCE-BASED
MIL-DTL-32459 Base Document:2013 Coatings, Anodic for Magnesium and Magnesium Alloys
SAE USCAR 1 : 2012 SALT SPRAY TESTING AND EVALUATION OF FASTENER FINISHES
ASTM D 6943 : 2015 : REDLINE Standard Practice for Immersion Testing of Industrial Protective Coatings and Linings
ASTM G 210 : 2013 Standard Practice for Operating the Severe Wastewater Analysis Testing Apparatus
I.S. EN ISO 2063-2:2017 THERMAL SPRAYING - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 2: EXECUTION OF CORROSION PROTECTION SYSTEMS (ISO 2063-2:2017)
CSA G401 : 2014 CORRUGATED STEEL PIPE PRODUCTS
ACI 423.7 : 2014 SPECIFICATION FOR UNBONDED SINGLE-STRAND TENDON MATERIALS
NACE TM 01 84 : 83(R1994) ACCELERATED TEST PROCEDURES FOR SCREENING ATMOSPHERIC SURFACE COATING SYSTEMS FOR OFFSHORE PLATFORMS AND EQUIPMENT
ASTM D 1150 : 1955 : R1987 : EDT 1 Single and Multi-Panel Forms for Recording Results of Exposure Tests of Paints
ASTM D 3451 : 2006 Standard Guide for Testing Coating Powders and Powder Coatings
ASTM D 3322 : 1982 : R1996 : EDT 1 Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
ASTM D 333 : 2001 : R2013 Standard Guide for Clear and Pigmented Lacquers
ASTM D 4712 : 1987 : REV A : R1996 Standard Guide for Testing Industrial Water-Reducible Coatings
I.S. ISO 4628-3:1988 PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF PAINT COATINGS - DESIGNATION OF INTENSITY, QUANTITY AND SIZE OF COMMON TYPES OF DEFECT - PART 3: DESIGNATION OF DEGREE OF RUSTING
BS EN ISO 4628-1:2016 Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance General introduction and designation system
NASA STD 5008 : 2011 PROTECTIVE COATING OF CARBON STEEL, STAINLESS STEEL, AND ALUMINUM ON LAUNCH STRUCTURES, FACILITIES, AND GROUND SUPPORT EQUIPMENT
NASA STD 5008A : *DUPLICATE RECORD* **DUPLICATE RECORD**
ASTM D 6675 : 2001 : R2006 Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel
MIL-PRF-24596 Revision B:2009 COATING COMPOUNDS, NONFLAMING, FIRE-RESISTANT
MIL-DTL-62270 Revision B:1998 CHASSIS, TANK: ARMORED VEHICLE, BRIDGE LAUNCHER, M48A5
16/30278559 DC : 0 BS ISO 18796-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF CARBON STEEL PROCESS VESSELS - PART 1: TECHNICAL REQUIREMENTS
BS EN ISO 16961:2015 Petroleum, petrochemical and natural gas industries. Internal coating and lining of steel storage tanks
ASTM D 4587 : 2011 : REDLINE Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
ASTM D 7376 : 2010 : REV A Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals
MIL PRF 62270 : A CHASSIS, TANK: ARMORED VEHICLE, BRIDGE LAUNCHER, M48A5
14/30273520 DC : 0 BS EN ISO 2063-2 - THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 2: CONDITIONS FOR EXECUTION OF CORROSION PROTECTION WORKS BY THERMAL SPRAY PROCESSES
MIL-R-53086 Base Document:1988 RUST CONVERTER, METRIC
MIL-PRF-14105 Revision E:2011 PAINT, HEAT-RESISTING (FOR STEEL SURFACES)
14/30289891 DC : 0 BS EN ISO 4628-1 - PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 1: GENERAL INTRODUCTION AND DESIGNATION SYSTEM
NACE SP 02 15 : 2015 BELOW-GRADE CORROSION CONTROL OF TRANSMISSION, DISTRIBUTION, AND SUBSTATION STRUCTURES BY COATING REPAIR SYSTEMS
MIL-DTL-70951 Revision A:2007 PALLET, FIELD ARTILLERY PROJECTILE
ASTM D 3451 : 2006 : R2012 Standard Guide for Testing Coating Powders and Powder Coatings
ASTM D 4712 : 1987 : REV A : R2001 Standard Guide for Testing Industrial Water-Reducible Coatings
TT-P-28 Revision H:2007 PAINT, ALUMINUM, HEAT RESISTING
SAE AS 6054 : 2006 DRUM, METAL-SHIPPING AND STORAGE
ASTM D 5962 : 1996 : R1999 Standard Guide for Maintaining Unqualified Coatings (Paints) Within Level I Areas of a Nuclear Power Facility (Withdrawn 2008)
BS EN ISO 2063-2:2017 Thermal spraying. Zinc, aluminium and their alloys Execution of corrosion protection systems
ASTM D 870 : 2015 Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
ASTM D 333 : 2001 Standard Guide for Clear and Pigmented Lacquers
ASTM D 6675 : 2001 Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel
ASTM D 2247 : 2015 : REDLINE Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
EN ISO 2063-2:2017 Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017)
GOST 849:2018 Primary nickel. SpecificationsE
UNE-EN ISO 4628-1:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system (ISO 4628-1:2016)
ISO 16961:2015 Petroleum, petrochemical and natural gas industries Internal coating and lining of steel storage tanks
BS EN ISO 4628-3:2016 Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance Assessment of degree of rusting
ISO 4628-3:2016 Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 3: Assessment of degree of rusting
ISO 4628-1:2016 Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 1: General introduction and designation system
EN ISO 4628-3:2016 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO 4628-3:2016)
EN ISO 4628-1:2016 PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 1: GENERAL INTRODUCTION AND DESIGNATION SYSTEM (ISO 4628-1:2016)
EN ISO 16961:2015 Petroleum, petrochemical and natural gas industries - Internal coating and lining of steel storage tanks (ISO 16961:2015)
MIL-DTL-62164 Revision E:2010 SEMITRAILER, LOWBED, HEAVY EQUIPMENT TRANSPORTER, 60-TON, M747
CGSB-1.114 : M91 QUICK-DRYING FLAT ENAMEL
ASTM D 2248 : 2001 : REV A Standard Practice for Detergent Resistance of Organic Finishes
AASHTO R 31 : 2009 : R2014 PRACTICE FOR EVALUATION OF PROTECTIVE COATING SYSTEMS FOR STRUCTURAL STEEL
MIL-DTL-11195 Revision H:2011 Enamel, Lusterless, Fast Dry, VOC Compliant, (for use on Ammunition and Other Metals)
ASTM D 1735 : 2014 : REDLINE Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
SAE AS 6055 : 2006 DRUM, METAL REUSABLE, SHIPPING AND STORAGE (CAP. FROM 88 TO 510 CUBIC INCHES)
NACE SP 04 15 : 2015 BELOW-GRADE INSPECTION AND ASSESSMENT OF CORROSION ON STEEL TRANSMISSION, DISTRIBUTION, AND SUBSTATION STRUCTURES
MIL-PRF-32076 Base Document:2000 UNITIZATION OF AMMUNITION
SAE J 1976 : 2012 OUTDOOR WEATHERING OF EXTERIOR MATERIALS
MIL D 6054 : F DRUM, METAL - SHIPPING AND STORAGE
IEEE 1839 : 2014 BELOW-GRADE CORROSION CONTROL OF TRANSMISSION, DISTRIBUTION, AND SUBSTATION STRUCTURES BY COATING REPAIR SYSTEMS
I.S. EN ISO 16961:2015 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF STEEL STORAGE TANKS (ISO 16961:2015)
ISO 2063-2:2017 Thermal spraying — Zinc, aluminium and their alloys — Part 2: Execution of corrosion protection systems
ASTM D 6577 : 2015 : REDLINE Standard Guide for Testing Industrial Protective Coatings
ASTM D 1654 : 2008 : R2016 : EDT 1 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
NACE TM 01 74 : 2002 LABORATORY METHODS FOR THE EVALUATION OF PROTECTIVE COATINGS AND LINING MATERIALS ON METALLIC SUBSTRATES IN IMMERSION SERVICE
ASTM D 3322 : 1982 : R2017 Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
ASTM D 4712 : 1987 : REV A : R2005 Standard Guide for Testing Industrial Water-Reducible Coatings (Withdrawn 2014)
ASTM D 5065 : 2017 : REDLINE Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.