• There are no items in your cart

ASTM D 6254/D6254M : 2013

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Specification for Wirebound Pallet-Type Wood Boxes
Available format(s)

Hardcopy , PDF

Superseded date

10-27-2020

Language(s)

English

Published date

10-03-2013

1.1This specification covers the fabrication of new fully enclosed wirebound pallet-type wood boxes intended for use as containers for domestic and overseas shipment of general materials and supplies, not exceeding 2500 lb [1134 kg] (see 4.1 and 10.1).

1.2Wirebound pallet-type wood box performance is dependent on its fabricated components; therefore, a variety of types, classes, and treatments reflecting varied performance are specified (see 4). This specification, however, does not cover wirebound pallet-type wood box performance under all atmosphere, handling, shipping, and storage conditions.

1.3The use of other construction methods or techniques is acceptable and permitted (see 5.1.11), provided the resulting packaging systems shall be of equal or better performance than would result from the use of these specified materials and procedures. The appropriate distribution cycle provided in Practice D4169 can be used to develop comparative procedures and criteria.

1.4Units—The values stated in either inch-pound or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. See for conversion of units.

1.5This standard does not purport to address all of the safety concerns, if any associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 10
DocumentType
Standard
Pages
14
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 3953 : 2006 Standard Specification for Strapping, Flat Steel and Seal
ASTM D 4169 : 2016 Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D 3951 : 2010 Standard Practice for Commercial Packaging
ASTM D 6199 : 1997 : EDT 1 Standard Practice for Quality of Wood Members of Containers and Pallets
ASTM F 1667 : 2005 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
ASTM D 4169 : 2005 Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D 4444 : 1992 : R1998 : EDT 1 Standard Test Methods for Use and Calibration of Hand-Held Moisture Meters
ASTM D 3953 : 2007 Standard Specification for Strapping, Flat Steel and Seals
ASTM D 4442 : 2007 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials
ASTM D 6199 : 1997 : R2005 Standard Practice for Quality of Wood Members of Containers and Pallets
ASTM D 3951 : 1998 Standard Practice for Commercial Packaging
ASTM D 3953 : 1991 Standard Specification for Strapping, Flat Steel and Seals
ASTM F 1667 : 2018 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
ASTM D 4169 : 1999 : EDT 1 Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D 3953 : 2012 Standard Specification for Strapping, Flat Steel and Seals
ASTM D 3953 : 2015 Standard Specification for Strapping, Flat Steel and Seals
ASTM F 1667 : 2013 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
ASTM F 1667 : 2011 : REV A Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
ASTM F 1667 : 2011 : REV A : EDT 1 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
ASTM F 1667 : 2015 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
ASTM D 4442 : 2015 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials
ASTM D 4169 : 2001 Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D 4444 : 2008 Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters
ASTM D 6199 : 2018 : REV A Standard Practice for Quality of Wood Members of Containers and Pallets
ASTM F 1667 : 2010 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
ASTM F 1667 : 2018 : REV A Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
ASTM D 3953 : 2005 Standard Specification for Strapping, Flat Steel and Seals
ASTM D 3951 : 2015 Standard Practice for Commercial Packaging
ASTM D 4169 : 2004 : REV A Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D 4444 : 1992 : R2003 Standard Test Methods for Use and Calibration of Hand-Held Moisture Meters
ASTM D 4444 : 2013 Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters
ASTM D 4442 : 2016 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials
ASTM D 3951 : 2018 Standard Practice for Commercial Packaging
ASTM D 4444 : 2013 : R2018 Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters
ASTM D 4169 : 2001 : EDT 1 Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D 6253 : 2005 Standard Practice for Treatment and/or Marking of Wood Packaging Materials
ASTM F 1667 : 2000 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
ASTM F 1667 : 2003 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
ASTM D 3953 : 2007 : REV A Standard Specification for Strapping, Flat Steel and Seals
ASTM F 1667 : 2001 : REV A Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
ASTM D 4169 : 2004 Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D 4169 : 2008 Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D 4442 : 2020 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials
ASTM D 6253 : 2010 Standard Practice for Treatment and/or Marking of Wood Packaging Materials
ASTM D 6199 : 2018 Standard Practice for Quality of Wood Members of Containers and Pallets
ASTM F 1667 : 2011 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
ASTM F 1667 : 2002 : REV A Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
ASTM D 6253 : 2005 : REV A Standard Practice for Treatment and/or Marking of Wood Packaging Materials
ASTM D 4169 : 2014 Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM F 1667 : 2017 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
ASTM D 3953 : 2002 Standard Specification for Strapping, Flat Steel and Seals
ASTM D 6199 : 2007 : R2012 Standard Practice for Quality of Wood Members of Containers and Pallets
ASTM D 4169 : 2009 Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D 3953 : 2013 Standard Specification for Strapping, Flat Steel and Seals
ASTM F 1667 : 2002 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
ASTM D 6253 : 2016 Standard Practice for Treatment and/or Marking of Wood Packaging Materials
ASTM D 3953 : 1997 Standard Specification for Strapping, Flat Steel and Seals
ASTM D 6253 : 1998 Standard Practice for Marking of Pallets
ASTM D 4442 : 1992 : R1997 : EDT 1 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials
ASTM D 4442 : 1984 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials
ASTM D 4442 : 1992 : R2003 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials
ASTM D 6199 : 2007 Standard Practice for Quality of Wood Members of Containers and Pallets

View more information
US$83.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.