• There are no items in your cart

ASTM D 6470 : 1999 : R2015

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Test Method for Salt in Crude Oils (Potentiometric Method)
Available format(s)

Hardcopy , PDF

Superseded date

08-17-2020

Language(s)

English

Published date

04-01-2015

CONTAINED IN VOL. 05.03, 2018 Defines the determination of salt in crude oils. For the purpose of this test method, salt is expressed as % (m/m) NaCl (sodium chloride) and covers the range from 0.0005 to 0.15% (m/m).

1.1This test method covers the determination of salt in crude oils. For the purpose of this test method, salt is expressed as % (m/m) NaCl (sodium chloride) and covers the range from 0.0005 % to 0.15 % (m/m).

1.2The limit of detection is 0.0002 % (m/m) for salt (as NaCl).

1.3The test method is applicable to nearly all of the heavier petroleum products, such as crude oils, residues, and fuel oils. It may also be applied to used turbine oil and marine diesel fuel to estimate seawater contamination. Water extractable salts, originating from additives present in oils, are codetermined.

1.4The values stated in SI units are to be regarded as the standard.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 02
DocumentType
Test Method
Pages
6
ProductNote
Reconfirmed 2015
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 7455 : 2019 Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis
ASTM D 8056 : 2018 Standard Guide for Elemental Analysis of Crude Oil
ASTM D 4057 : 2012 : R2018 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4057 : 2019 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 7578 : 2018 Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants

ASTM D 4057 : 2019 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4057 : 1995 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4377 : 2000 : EDT 1 Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
ASTM D 4928 : 2000 Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration
ASTM D 4177 : 2016 : EDT 1 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 4006 : 1981 : R2000 : EDT 1 Standard Test Method for Water in Crude Oil by Distillation
ASTM D 4177 : 1995 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 4057 : 2012 : R2018 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4377 : 2000 Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
ASTM D 4006 : 2016 Standard Test Method for Water in Crude Oil by Distillation
ASTM D 1193 : 1977 : R1983 : EDT 1 Standard Specification for Reagent Water
ASTM D 4006 : 2016 : EDT 1 Standard Test Method for Water in Crude Oil by Distillation
ASTM D 4057 : 1981 : EDT 2 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4377 : 2000 : R2006 Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
ASTM D 4006 : 2011 : R2012 : EDT 1 Standard Test Method for Water in Crude Oil by Distillation
ASTM D 4928 : 2000 : EDT 1 Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration
ASTM D 4057 : 2006 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 1193 : 2006 : R2011 Standard Specification for Reagent Water
ASTM D 4006 : 2007 Standard Test Method for Water in Crude Oil by Distillation
ASTM D 4177 : 2015 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM E 200 : 2016 : REDLINE Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis
ASTM D 4057 : 2012 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4928 : 2000 : R2010 Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration
ASTM D 4928 : 2000 : R2005 Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration
ASTM D 1193 : 1991 Standard Specification for Reagent Water
ASTM D 4177 : 1995 : R2010 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 4177 : 1995 : R2000 Standard Practice for Automatic Sampling of Peroleum and Petroleum Products
ASTM D 4928 : 2011 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration
ASTM D 4006 : 2011 : R2012 Standard Test Method for Water in Crude Oil by Distillation
ASTM D 4006 : 1981 : R2005 Standard Test Method for Water in Crude Oil by Distillation
ASTM D 4928 : 2012 : R2018 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration
ASTM D 4006 : 2011 Standard Test Method for Water in Crude Oil by Distillation
ASTM D 4177 : 2016 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 1193 : 1970 Standard Specification For Reagent Water
ASTM D 4177 : 1995 : R2005 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 1193 : 2006 Standard Specification for Reagent Water
ASTM D 1193 : 1999 Standard Specification for Reagent Water
ASTM D 4928 : 2012 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration
ASTM D 4057 : 1995 : R2000 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 1193 : 2006 : R2018 Standard Specification for Reagent Water
ASTM D 4177 : 2015 : REV A Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D 4057 : 2006 : R2011 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4377 : 2000 : R2011 Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration (Withdrawn 2020)
ASTM D 329 : 2007 Standard Specification for Acetone

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.