Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

07-01-2017

Publisher

American Society for Testing and Materials

CONTAINED IN VOL. 04.03, 2017 Defines the material requirements for preformed thermoplastic vulcanizate (TPV) elastomeric joint seals for bridges.

1.1This specification covers the material requirements for preformed thermoplastic vulcanizate (TPV) elastomeric joint seals for bridges. The seal consists of a multiple-web design composed of a TPV and functions only by compression of the seal between the faces of the joint with the seal folding inward at the top to facilitate compression. The seal is installed with a lubricant adhesive and is designed to seal the joint and reject incompressibles.

Note 1:This specification may not be applicable for seals whose height is less than 90 % of its nominal width.

1.2The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are provided for information only.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	D 04
DocumentType	Standard
Pages	4
ProductNote	Reconfirmed 2017
PublisherName	American Society for Testing and Materials
Status	Current
Supersedes	ASTM D 6924 : 2003 : R2012

ASTM D 2240 : 2000	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1149 : 2016	Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM D 6338 : 2009	Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs) Based on ASTM Standard Test Methods
ASTM D 4483 : 1999	Standard Practice for Determining Precision for Test Method Standards in the Rubber and Carbon Black Industries
ASTM D 6338 : 2003	Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizate (HCTPVs)
ASTM D 4483 : 2020	Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM D 4483 : 2005 : REV A	Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM D 6338 : 2017 : REDLINE	Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods
ASTM D 6338 : 1998	Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizate (HCTPVs)
ASTM D 1149 : 2016-02	TEST METHODS FOR RUBBER DETERIORATION - CRACKING IN AN OZONE CONTROLLED ENVIRONMENT
ASTM D 2240 : 2004	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1149 : 2015	Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM D 412 : 2016 : EDT 1	Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D 1149 : 2007	Standard Test Methods for Rubber Deterioration-Cracking in an Ozone Controlled Environment
ASTM D 2240 : 2004 : EDT 1	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 6338 : 2017	Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods
ASTM D 412 : 2016	Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D 1149 : 2018	Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM D 2240 : 2015 : R2021	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 6338 : 2010	Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs) Based on ASTM Standard Test Methods
ASTM D 575 : 1991 : R1996	Standard Test Methods for Rubber Properties in Compression
ASTM D 2240 : 2002	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 2240 : 2015	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1149 : 2007 : R2012	Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM D 2240 : 2003	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 4483 : 2005	Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM D 1149 : 1978 : REV A	Standard Test Method for Rubber Deterioration - Surface Ozone Cracking In A Chamber ( Flat Specimen)
ASTM D 2240 : 2002 : REV B	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 2240 : 2015 : EDT 1	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 4483 : 2014 : REV A	Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM D 412 : 2016 : R2021	Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D 4483 : 2014	Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM D 2240 : 2005	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 4483 : 2018	Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM D 4483 : 2005 : REV A : R2011	Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
ASTM D 4483 : 2014-02	PRACTICE FOR EVALUATING PRECISION FOR TEST METHOD STANDARDS IN THE RUBBER AND CARBON BLACK MANUFACTURING INDUSTRIES
ASTM D 2240 : 2005 : R2010	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 2240 : 2002 : REV A	Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1149 : 1999	Standard Test Method for Rubber Deterioration-Surface Ozone Cracking in a Chamber