ASTM D 709 : 2017
Current
The latest, up-to-date edition.
Standard Specification for Laminated Thermosetting Materials
Hardcopy , PDF
English
04-18-2017
This specification covers laminated thermosetting materials consisting of two or more plies or layers of reinforcing material bonded by a thermosetting synthetic resin.
1.1This specification covers laminated thermosetting materials consisting of two or more plies or layers of reinforcing material bonded by a thermosetting synthetic resin. Examples of such reinforcement are cellulose paper, cotton fabric, glass fabric, and synthetic fiber fabrics. These materials are available in the form of sheets, rolled and molded tubes, and molded rods.
1.2The values stated in inch-pound units are to be regarded as the standard.
Note 1:This specification resembles IEC 60893-3 in title only. The content is significantly different.
1.3The following safety hazards caveat pertains only to the test methods described in this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Committee |
D 09
|
| DocumentType |
Standard
|
| Pages |
35
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
| ASTM F 992 : 2017 | Standard Specification for Valve Label Plates |
| ASTM D 2132 : 2019 | Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials |
| ASTM D 618 : 2021 | Standard Practice for Conditioning Plastics for Testing |
| ASTM D 883 : 2023 | Standard Terminology Relating to Plastics |
| ASTM D 495 : 2014 | Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation |
| ASTM D 621 : 1964 : R1988 : EDT 1 | Test Methods for Deformation of Plastics Under Load |
| ASTM D 3636 : 2000 | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
| ASTM D 883 : 2024 | Standard Terminology Relating to Plastics |
| ASTM D 2303 : 1997 : R2004 | Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials (Withdrawn 2013) |
| ASTM D 1711 : 2002 | Standard Terminology Relating to Electrical Insulation |
| ASTM D 2304 : 2010 | Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials |
| ASTM D 257 : 2014 | Standard Test Methods for DC Resistance or Conductance of Insulating Materials |
| ASTM D 883 : 2022 | Standard Terminology Relating to Plastics |
| ASTM D 2304 : 2023 | Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials |
| ASTM D 2304 : 1997 | Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials |
| ASTM D 883 : 2020 : REV B | Standard Terminology Relating to Plastics |
| ASTM D 1711 : 2011 | Standard Terminology Relating to Electrical Insulation |
| ASTM D 3636 : 2013 : REV A : EDT 1 | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
| ASTM D 1711 : 2011 : REV A | Standard Terminology Relating to Electrical Insulation |
| ASTM D 2303 : 1997 | Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials |
| ASTM D 6054 : 1997 | Standard Practice for Conditioning Electrical Insulating Materials for Testing |
| ASTM D 1711 : 2013 | Standard Terminology Relating to Electrical Insulation |
| ASTM D 621 : 1964 : R1988 | Test Methods for Deformation of Plastics Under Load (Withdrawn 1994) |
| ASTM D 495 : 1999 | Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation |
| ASTM D 3636 : 2006 | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
| ASTM D 1711 : 1999 | Standard Terminology Relating to Electrical Insulation |
| ASTM D 2303 : 2013 | Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials |
| ASTM D 3636 : 2019 | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
| ASTM D 3636 : 2013 | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
| ASTM D 2303 : 2020 : EDT 1 | Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials |
| ASTM D 1711 : 2014 : REV A | Standard Terminology Relating to Electrical Insulation |
| ASTM D 1180 : 1957 : R1978 | Method of Test for Bursting Strength of Round Rigid Plastic Tubing (Withdrawn 1989) |
| ASTM D 229 : 2019 : EDT 1 | Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation |
| ASTM D 1711 : 2015 | Standard Terminology Relating to Electrical Insulation |
| ASTM D 1711 : 2014 | Standard Terminology Relating to Electrical Insulation |
| ASTM D 2304 : 2018 | Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials |
| ASTM D 1711 : 2024 | Standard Terminology Relating to Electrical Insulation |
| ASTM D 1711 : 2022 | Standard Terminology Relating to Electrical Insulation |
| ASTM D 3636 : 2013 : REV A | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
| ASTM D 1711 : 2020 | Standard Terminology Relating to Electrical Insulation |
| ASTM D 1180 : 1957 : R1976 | Method of Test for Bursting Strength of Round Rigid Plastic Tubing |
| ASTM D 3636 : 2011 | Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
| ASTM D 1711 : 2008 | Standard Terminology Relating to Electrical Insulation |
| ASTM D 6054 : 1997 : R2004 | Standard Practice for Conditioning Electrical Insulating Materials for Testing (Withdrawn 2012) |
| ASTM D 495 : 2022 | Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation |
| ASTM D 257 : 2014 : R2021 : EDT 1 | Standard Test Methods for DC Resistance or Conductance of Insulating Materials |
| ASTM D 2303 : 2020 | Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.