Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

08-01-2017

Publisher

American Society for Testing and Materials

CONTAINED IN VOL. 15.03, 2017 Describes the test requirements for (FRP) composite smooth round rods and textured bars for determining the transverse shear strength via a double shear fixture.

1.1This test method specifies the test requirements for (FRP) composite smooth round rods and textured bars for determining the transverse shear strength via a double shear fixture. FRP rods and bars are often loaded in transverse shear when these elements are used as dowels in concrete pavements, as stirrups in concrete beams, or as shear reinforcements in glued-laminated wood beams, for example.

1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.2.1Within the text, the inch-pound units are shown in brackets.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	D 30
DocumentType	Test Method
Pages	12
ProductNote	Reconfirmed 2017
PublisherName	American Society for Testing and Materials
Status	Current

ASTM A 615/A615M : 2020	Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
ASTM D 883 : 2023	Standard Terminology Relating to Plastics
ASTM E 122 : 2017 : REDLINE	Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
ASTM A 615/A615M : 2016-03	SPECIFICATION FOR DEFORMED AND PLAIN CARBON-STEEL BARS FOR CONCRETE REINFORCEMENT
ASTM E 456 : 2002	Standard Terminology for Relating to Quality and Statistics
ASTM D 3878 : 2002 : REV A	Standard Terminology for Composite Materials
ASTM D 883 : 2024	Standard Terminology Relating to Plastics
ASTM D 3878 : 2023	Standard Terminology for Composite Materials
ASTM E 456 : 2013 : REV A : R2022	Standard Terminology Relating to Quality and Statistics
ASTM D 5229/D5229M : 2014-06	TEST METHOD FOR MOISTURE ABSORPTION PROPERTIES AND EQUILIBRIUM CONDITIONING OF POLYMER MATRIX COMPOSITE MATERIALS
ASTM D 3878 : 2015	Standard Terminology for Composite Materials
ASTM D 3878 : 2019	Standard Terminology for Composite Materials
ASTM D 3878 : 2000	Standard Terminology Composite Materials
ASTM D 883 : 2022	Standard Terminology Relating to Plastics
ASTM D 883 : 2020 : REV B	Standard Terminology Relating to Plastics
ASTM E 6 : 2002	Standard Terminology Relating to Methods of Mechanical Testing
ASTM D 7205/D7205M : 2021	Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
ASTM E 456 : 2013 : REV A : R2017 : EDT 5	Standard Terminology Relating to Quality and Statistics
ASTM E 122 : 2017 : R2022	Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
ASTM A 615/A615M : 2022	Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
ASTM E 122 : 2017	Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
ASTM D 3878 : 2003 : REV A	Standard Terminology for Composite Materials
ASTM D 3878 : 2016	Standard Terminology for Composite Materials
ASTM D 3878 : 2019 : REV A	Standard Terminology for Composite Materials
ASTM D 3878 : 2020 : REV A	Standard Terminology for Composite Materials
ASTM D 3878 : 1998	Standard Terminology Composite Materials
ASTM D 3878 : 2018	Standard Terminology for Composite Materials
ASTM D 3878 : 2002	Standard Terminology for Composite Materials
ASTM D 7205/D7205M : 2006 : R2016	Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
ASTM E 6 : 2015 : EDT 3	Standard Terminology Relating to Methods of Mechanical Testing
ASTM D 3878 : 2020 : REV B	Standard Terminology for Composite Materials
ASTM E 6 : 2023 : REV A	Standard Terminology Relating to Methods of Mechanical Testing
ASTM D 3878 : 2004	Standard Terminology for Composite Materials
ASTM E 4 : 2021	Standard Practices for Force Calibration and Verification of Testing Machines
ASTM D 3878 : 2007 : R2013	Standard Terminology for Composite Materials
ASTM D 3878 : 2020 : REDLINE	Standard Terminology for Composite Materials
ASTM D 3878 : 2020	Standard Terminology for Composite Materials
ASTM D 3878 : 2003	Standard Terminology for Composite Materials
ASTM E 6 : 2015 : EDT 4 : REDLINE	Standard Terminology Relating to Methods of Mechanical Testing
ASTM D 3878 : 2007	Standard Terminology for Composite Materials
ASTM E 6 : 2015 : EDT 4	Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 6 : 2023	Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 456 : 2013 : REV A : R2017 : EDT 4	Standard Terminology Relating to Quality and Statistics
ASTM E 456 : 2013 : REV A : R2017 : EDT 6	Standard Terminology Relating to Quality and Statistics
ASTM D 3878 : 2004 : REV A	Standard Terminology for Composite Materials
ASTM D 3878 : 2001	Standard Terminology Composite Materials