• There are no items in your cart

ASTM D 7714 : 2011 : R2016 : EDT 1

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Specification for Glycerin Base Engine Coolant for Automobile and Light-Duty Service
Available format(s)

Hardcopy , PDF

Superseded date

08-25-2023

Language(s)

English

Published date

05-13-2016

CONTAINED IN VOL. 15.05, 2016 Defines the requirements for glycerin base engine coolants used in automobiles or other light duty service cooling systems.

1.1This specification covers the requirements for glycerin base engine coolants used in automobiles or other light duty service cooling systems. When concentrates are used at 50 to 60 % concentration by volume in water, or when prediluted glycerin base engine coolants (50 volume % minimum) are used without further dilution, they will function effectively to provide protection against freezing, boiling, and corrosion.

1.2The coolants governed by this specification are categorized as follows:

Coolant Type

Description

I

Glycerin base concentrate

II

Glycerin predilute (50 to 60 volume %)

Note 1:This specification is based on the knowledge of the performance of engine coolants prepared from new or virgin ingredients that comply with Specification D7640.

1.3The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See X1.5 and X3.1.3 for specific warning statements.

Note 2:This specification applies to automobiles and light duty service. A glycerin based specification for heavy duty engine service is under development.

Committee
D 15
DocumentType
Standard
Pages
5
ProductNote
Reconfirmed EDT 1
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 7715 : 2012 : R2016 : EDT 1 Standard Specification for Fully-Formulated Glycerin Base Engine Coolant for Heavy-Duty Engines
ASTM D 2847 : 2015 Standard Practice for Testing Engine Coolants in Car and Light Truck Service

ASTM D 1122 : 2016 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D 1177 : 2012 Standard Test Method for Freezing Point of Aqueous Engine Coolants
ASTM D 1123 : 1999 : R2009 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
ASTM D 5931 : 1996 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
ASTM D 1122 : 2016 : R2017 : EDT 1 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D 1177 : 2017 Standard Test Method for Freezing Point of Aqueous Engine Coolants
ASTM D 3321 : 2019 Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
ASTM D 1122 : 2020 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D 1177 : 2005 Standard Test Method for Freezing Point of Aqueous Engine Coolants
ASTM D 1122 : 2008 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D 1287 : 2011 : R2020 Standard Test Method for pH of Engine Coolants and Antirusts
ASTM D 1120 : 1994 : R1998 Standard Test Method for Boiling Point of Engine Coolants
ASTM D 1384 : 2001 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 1120 : 2011 Standard Test Method for Boiling Point of Engine Coolants
ASTM D 1287 : 1991 : R1997 : EDT 1 Standard Test Method for pH of Engine Coolants and Antirusts
ASTM D 512 : 2012 Standard Test Methods for Chloride Ion In Water (Withdrawn 2021)
ASTM D 3634 : 1999 : R2009 Standard Test Method for Trace Chloride Ion in Engine Coolants
ASTM D 1287 : 2009 Standard Test Method for pH of Engine Coolants and Antirusts
ASTM D 1177 : 2017 : REDLINE Standard Test Method for Freezing Point of Aqueous Engine Coolants
ASTM D 1122 : 1997 : REV A Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D 1177 : 1994 : R1998 : EDT 1 Standard Test Method for Freezing Point of Aqueous Engine Coolants
ASTM D 4725 : 2011 Standard Terminology for Engine Coolants
ASTM D 1120 : 1994 : R1998 : EDT 1 Standard Test Method for Boiling Point of Engine Coolants
ASTM D 1119 : 2005 : R2015 Standard Test Method for Percent Ash Content of Engine Coolants
ASTM D 1120 : 2008 Standard Test Method for Boiling Point of Engine Coolants
ASTM D 4340 : 1996 : R2007 Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
ASTM D 2570 : 1991 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM E 29 : 2002 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM D 1122 : 2013 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D 1123 : 1999 : R2003 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
ASTM D 1287 : 2011 Standard Test Method for pH of Engine Coolants and Antirusts
ASTM D 3634 : 1999 : R2005 Standard Test Method for Trace Chloride Ion in Engine Coolants
ASTM D 1121 : 2007 Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
ASTM D 1882 : 1996 Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
ASTM D 5931 : 1996 : R2002 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
ASTM D 2570 : 2016 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM D 1120 : 2017 : REDLINE Standard Test Method for Boiling Point of Engine Coolants
ASTM D 4725 : 1998 Standard Terminology for Engine Coolants
ASTM D 1121 : 2011 : R2020 Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
ASTM D 1177 : 1994 : R1998 Standard Test Method for Freezing Point of Aqueous Engine Coolants
ASTM D 1882 : 1996 : R2006 Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
ASTM D 4725 : 2015 : REDLINE Standard Terminology for Engine Coolants and Related Fluids
ASTM D 1121 : 1967 Standard Method Of Test For Reserve Alkalinity Of Engine Antifreezes And Antirusts
ASTM D 2809 : 1994 : R1999 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
ASTM D 7640 : 2016 : REDLINE Standard Specification for Engine Coolant Grade Glycerin
ASTM D 3321 : 2013 Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
ASTM D 4327 : 2011 Standard Test Method for Anions in Water by Suppressed Ion Chromatography
ASTM D 5827 : 2009 : EDT 1 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 1384 : 2005 : EDT 1 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 6660 : 2001 : R2014 : EDT 1 Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
ASTM D 6130 : 1997 : REV A : R2009 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D 1287 : 2011 : REDLINE Standard Test Method for pH of Engine Coolants and Antirusts
ASTM D 1123 : 1999 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
ASTM D 6660 : 2001 : R2007 Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
ASTM D 3321 : 1994 : R1998 Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
ASTM D 1119 : 2005 : R2009 Standard Test Method for Percent Ash Content of Engine Coolants
ASTM D 1882 : 1996 : R2001 Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
ASTM D 516 : 2016 : REDLINE Standard Test Method for Sulfate Ion in Water
ASTM D 1123 : 1999 : R2015 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
ASTM D 3634 : 1999 : R2005 : EDT 1 Standard Test Method for Trace Chloride Ion in Engine Coolants
ASTM D 1126 : 2002 Standard Test Method for Hardness in Water
ASTM D 6660 : 2001 Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
ASTM D 1293 : 1999 Standard Test Methods for pH of Water
ASTM D 1881 : 1997 : R2009 Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
ASTM D 1881 : 1997 : R2002 : EDT 1 Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
ASTM D 1120 : 1994 : R2004 Standard Test Method for Boiling Point of Engine Coolants
ASTM D 4327 : 2003 Standard Test Method for Anions in Water by Chemically Suppressed Ion Chromatography
ASTM D 1121 : 2011 : REDLINE Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
ASTM D 1882 : 2017 Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
ASTM D 6130 : 2011 : R2018 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D 4725 : 2006 Standard Terminology for Engine Coolants
ASTM D 1881 : 2017 Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
ASTM D 1881 : 1997 : R2002 Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
ASTM D 1119 : 2005 Standard Test Method for Percent Ash Content of Engine Coolants
ASTM D 1882 : 1996 : R2012 Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
ASTM D 2809 : 2009 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
ASTM D 2570 : 2009 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM D 1123 : 1959 : R1968 Standard Method Of Test For Water In Concentrated Engine Antifreezes By The Iodine Reagent Method
ASTM D 4725 : 2015 Standard Terminology for Engine Coolants and Related Fluids
ASTM D 1119 : 2000 Standard Test Method for Percent Ash Content of Engine Coolants and Antirusts
ASTM D 4340 : 1996 Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
ASTM E 394 : 2015 : REDLINE Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method
ASTM D 7640 : 2016 Standard Specification for Engine Coolant Grade Glycerin
ASTM D 1293 : 1999 : R2005 Standard Test Methods for pH of Water
ASTM D 6130 : 1997 : REV A : R2003 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D 1121 : 2011 Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
ASTM D 1384 : 1997 : REV A Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 1287 : 1991 : R2002 Standard Test Method for pH of Engine Coolants and Antirusts
ASTM D 1384 : 2004 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 1126 : 2012 Standard Test Method for Hardness in Water
ASTM D 1121 : 1998 Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
ASTM D 2570 : 2008 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM D 1384 : 2005 : R2019 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 1293 : 2018 Standard Test Methods for pH of Water
ASTM D 4327 : 2017 Standard Test Method for Anions in Water by Suppressed Ion Chromatography
ASTM D 4327 : 1997 Standard Test Method for Anions in Water by Chemically Suppressed Ion Chromatography
ASTM D 1126 : 2002 : R2007 : EDT 1 Standard Test Method for Hardness in Water
ASTM D 1177 : 2016 Standard Test Method for Freezing Point of Aqueous Engine Coolants
ASTM D 5827 : 1995 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 4340 : 2019 Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
ASTM D 4340 : 1996 : R2001 Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
ASTM D 6660 : 2001 : R2019 Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
ASTM D 1126 : 2017 Standard Test Method for Hardness in Water
ASTM D 4725 : 2004 Standard Terminology for Engine Coolants
ASTM D 2809 : 2009 : R2017 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
ASTM D 3634 : 1999 : R2015 Standard Test Method for Trace Chloride Ion in Engine Coolants
ASTM E 394 : 2000 Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method
ASTM D 1126 : 1996 Standard Test Method for Hardness in Water
ASTM D 2809 : 2004 : EDT 2 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
ASTM D 2809 : 2004 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
ASTM D 6130 : 2011 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D 1120 : 2017 Standard Test Method for Boiling Point of Engine Coolants
ASTM D 4725 : 2008 Standard Terminology for Engine Coolants
ASTM D 3321 : 1994 : R2002 Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
ASTM D 3321 : 2012 Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
ASTM D 1384 : 2005 : R2012 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 7640 : 2011 Standard Specification for Engine Coolant Grade Glycerin
ASTM D 5931 : 1996 : R2007 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
ASTM D 5827 : 2009 : R2015 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 1120 : 2016 Standard Test Method for Boiling Point of Engine Coolants
ASTM D 2809 : 2004 : EDT 1 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
ASTM D 1293 : 2012 Standard Test Methods for pH of Water
ASTM D 1122 : 1997 : REV A : R2002 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D 4725 : 2008 : REV A Standard Terminology for Engine Coolants
ASTM D 1120 : 2011 : EDT 1 Standard Test Method for Boiling Point of Engine Coolants
ASTM D 1384 : 2005 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
ASTM D 1881 : 1997 : R2002 : EDT 2 Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
ASTM D 5931 : 2013 : R2017 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
ASTM D 2570 : 1996 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM D 5827 : 2009 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 4340 : 2010 Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
ASTM D 2570 : 2016 : REDLINE Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM D 1881 : 1997 Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
ASTM D 2570 : 2010 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM D 1177 : 2007 Standard Test Method for Freezing Point of Aqueous Engine Coolants
ASTM D 3634 : 1999 : EDT 1 Standard Test Method for Trace Chloride Ion in Engine Coolants
ASTM D 1293 : 1984 : R1990 Standard Test Methods for pH of Water
ASTM D 4725 : 2013 Standard Terminology for Engine Coolants and Related Fluids
ASTM D 5931 : 2013 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
ASTM D 3321 : 1994 : R2007 Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
ASTM D 6130 : 1997 : REV A Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D 5931 : 2020 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.