ASTM D 7800/D7800M : 2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
12-07-2023
English
11-26-2014
1.1 This test method is primarily for the determination of elemental sulfur in natural gas pipelines, but it may be applied to other gaseous fuel pipelines and applications provided the user has validated its suitability for use.
1.1This test method is primarily for the determination of elemental sulfur in natural gas pipelines, but it may be applied to other gaseous fuel pipelines and applications provided the user has validated its suitability for use. The detection range for elemental sulfur, reported as sulfur, is 0.0018 to 30 mg/L. The results may also be reported in units of mg/kg or ppm.
1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Committee |
D 03
|
| DocumentType |
Test Method
|
| Pages |
13
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
| ASTM D 7607 : 2011 | Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method) |
| ASTM D 1072 : 2006 : R2012 | Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration |
| ASTM D 6228 : 2010 | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection (Withdrawn 2019) |
| ASTM D 4150 : 2021 : REV A | Standard Terminology Relating to Gaseous Fuels |
| ASTM D 4150 : 2020 : REV A | Standard Terminology Relating to Gaseous Fuels |
| ASTM D 3609 : 2000 : R2014 | Standard Practice for Calibration Techniques Using Permeation Tubes |
| ASTM D 5504 : 2012 : REDLINE | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence |
| ASTM D 4468 : 1985 : R2015 | Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and<brk/> Rateometric Colorimetry |
| ASTM D 4468 : 1985 : R2000 | Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry |
| ASTM D 5287 : 1997 | Standard Practice for Automatic Sampling of Gaseous Fuels |
| ASTM D 1945 : 1996 : EDT 1 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
| ASTM D 7165 : 2022 | Standard Practice for Gas Chromatograph Based On-line/At-line Analysis for Sulfur Content of Gaseous Fuels |
| ASTM D 6228 : 1998 | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection |
| ASTM D 7165 : 2010 : R2015 | Standard Practice for Gas Chromatograph Based On-line/At-line Analysis for Sulfur Content of Gaseous Fuels |
| ASTM D 1945 : 1996 : R2001 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
| ASTM D 4084 : 1982 : R1988 | Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method) |
| ASTM D 6228 : 2019 | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection |
| ASTM D 7166 : 2005 | Standard Practice for Total Sulfur Analyzer Based On-line/At-line for Sulfur Content of Gaseous Fuels |
| ASTM D 1072 : 1990 : R1999 | Standard Test Method for Total Sulfur in Fuel Gases |
| ASTM D 4084 : 2006 | Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method) |
| ASTM D 7551 : 2010 : R2015 | Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence |
| ASTM D 7166 : 2010 : R2015 | Standard Practice for Total Sulfur Analyzer Based On-line/At-line for Sulfur Content of Gaseous Fuels |
| ASTM D 4084 : 2005 | Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method) |
| ASTM D 4626 : 1995 : R2005 | Standard Practice for Calculation of Gas Chromatographic Response Factors |
| ASTM D 4150 : 2019 | Standard Terminology Relating to Gaseous Fuels |
| ASTM D 4084 : 1994 : R1999 | Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method) |
| ASTM D 7165 : 2010 | Standard Practice for Gas Chromatograph Based On-line/At-line Analysis for Sulfur Content of Gaseous Fuels |
| ASTM D 7165 : 2006 | Standard Practice for Gas Chromatograph Based On-line/At-line Analysis for Sulfur Content of Gaseous Fuels |
| ASTM D 3609 : 2000 : R2005 | Standard Practice for Calibration Techniques Using Permeation Tubes |
| ASTM D 5504 : 2008 | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence |
| ASTM D 4084 : 2007 : R2017 | Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method) |
| ASTM D 5287 : 2008 | Standard Practice for Automatic Sampling of Gaseous Fuels |
| ASTM D 1072 : 2006 : R2017 | Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration |
| ASTM D 3609 : 2000 : R2010 | Standard Practice for Calibration Techniques Using Permeation Tubes |
| ASTM D 7166 : 2010 | Standard Practice for Total Sulfur Analyzer Based On-line/At-line for Sulfur Content of Gaseous Fuels |
| ISO 14532:2014 | Natural gas — Vocabulary |
| ASTM D 3609 : 2022 | Standard Practice for Calibration Techniques Using Permeation Tubes |
| ASTM D 4150 : 2008 | Standard Terminology Relating to Gaseous Fuels |
| ASTM D 3609 : 2000 | Standard Practice for Calibration Techniques Using Permeation Tubes |
| ASTM D 7551 : 2010 | Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence |
| ASTM D 1072 : 2006 | Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration |
| ASTM D 4150 : 2000 | Standard Terminology Relating to Gaseous Fuels |
| ASTM D 5287 : 2008 : R2015 | Standard Practice for Automatic Sampling of Gaseous Fuels (Withdrawn 2024) |
| ASTM D 4626 : 1995 : R2019 | Standard Practice for Calculation of Gas Chromatographic Response Factors |
| ASTM D 1945 : 2003 : R2010 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
| ASTM D 5504 : 1998 | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence |
| ASTM D 1945 : 2014 : R2019 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
| ASTM D 4468 : 1985 : R2011 | Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and<br> Rateometric Colorimetry |
| ASTM D 1945 : 2003 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
| ASTM D 4468 : 1985 : R2006 | Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry |
| ASTM D 4150 : 2003 | Standard Terminology Relating to Gaseous Fuels |
| ASTM E 840 : 1995 : R2013 | Standard Practice for Using Flame Photometric Detectors in Gas Chromatography |
| ASTM D 4626 : 1995 : R2015 | Standard Practice for Calculation of Gas Chromatographic Response Factors |
| ASTM D 5504 : 2001 | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence |
| ASTM D 5504 : 2001 : R2006 | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence |
| ASTM D 4626 : 1995 : R2000 | Standard Practice for Calculation of Gas Chromatographic Response Factors |
| ASTM D 4150 : 2021 | Standard Terminology Relating to Gaseous Fuels |
| ASTM D 5504 : 2012 | Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence |
| ASTM D 4084 : 2007 : R2012 | Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method) |
| ASTM D 4150 : 2008 : R2016 | Standard Terminology Relating to Gaseous Fuels |
| ASTM D 4626 : 1995 : R2010 | Standard Practice for Calculation of Gas Chromatographic Response Factors |
| ASTM D 1945 : 2014 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
| ASTM D 4150 : 2021 : REV B | Standard Terminology Relating to Gaseous Fuels |
| ASTM D 4084 : 2007 | Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method) |
| ASTM D 1145 : 1980 | Test Method for Sampling Natural Gas (Withdrawn 1986) |
| ASTM E 840 : 1995 : R2021 : EDT 1 | Standard Practice for Using Flame Photometric Detectors in Gas Chromatography |
| ASTM D 1945 : 2014 : REDLINE | Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
| ASTM D 1945 : 1991 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.