Standard Practice for Manufacturing Quality Control of Geotextiles

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

02-15-2017

Publisher

American Society for Testing and Materials

CONTAINED IN VOL. 04.13, 2017 Defines the manufacturing quality control of geotextiles, describing types of tests, the proper test methods, minimum testing frequencies, and best practices for sampling.

1.1This practice covers the manufacturing quality control of geotextiles, describing types of tests, the proper test methods, minimum testing frequencies, and best practices for sampling.

1.2This practice does not address manufacturing quality assurance, product acceptance testing, or conformance testing. These are independent activities taken by organizations other than the geotextiles manufacturer.

1.3This practice is intended to aid manufacturers, suppliers, purchasers, installers, and end users of geotextiles in establishing a minimum level of effort for maintaining quality control.

1.4This practice covers procedures for sampling geotextiles for the purpose of manufacturing quality control (MQC). These procedures are designed to ensure that the correct number of representative samples are obtained and properly reported by the manufacturer.

1.5The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee	D 35
DocumentType	Standard Practice
Pages	7
PublisherName	American Society for Testing and Materials
Status	Current

ASTM D 4354 : 2012	Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products(RECPs) for Testing
ASTM D 4751 : 2016 : REDLINE	Standard Test Methods for Determining Apparent Opening Size of a Geotextile
ASTM D 5261 : 2010 : R2018	Standard Test Method for Measuring Mass per Unit Area of Geotextiles
ASTM D 4355 : 2007	Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus
ASTM D 4533 : 2004 : R2009	Standard Test Method for Trapezoid Tearing Strength of Geotextiles
ASTM D 4491 : 1999 : REV A : R2009	Standard Test Methods for Water Permeability of Geotextiles by Permittivity
ASTM D 4533 : 2011	Standard Test Method for Trapezoid Tearing Strength of Geotextiles
ASTM D 4533 : 2004	Standard Test Method for Trapezoid Tearing Strength of Geotextiles
ASTM D 5261 : 2010	Standard Test Method for Measuring Mass per Unit Area of Geotextiles
ASTM D 4355 : 1999	Standard Test Method for Deterioration of Geotextiles from Exposure to Ultraviolet Light and Water (Xenon-Arc Type Apparatus)
ASTM D 4354 : 2012 : R2020	Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products (RECPs) for Testing
ASTM D 4595 : 1986 : R2001	Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
ASTM D 4533 : 1991 : R1996	Standard Test Method for Trapezoid Tearing Strength of Geotextiles
ASTM D 4751 : 2021	Standard Test Methods for Determining Apparent Opening Size of a Geotextile
ASTM D 6241 : 2014 : REDLINE	Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
ASTM D 123 : 2019	Standard Terminology Relating to Textiles
ASTM D 4751 : 1999 : REV A	Standard Test Method for Determining Apparent Opening Size of a Geotextile
ASTM D 4751 : 2004	Standard Test Method for Determining Apparent Opening Size of a Geotextile
ASTM D 4491 : 1999 : REV A : R2004 : EDT 1	Standard Test Methods for Water Permeability of Geotextiles by Permittivity
ASTM D 5261 : 1992 : R2003	Standard Test Method for Measuring Mass per Unit Area of Geotextiles
ASTM D 4632 : 1991 : R1996	Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
ASTM D 4595 : 2011	Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
ASTM D 4751 : 1999 : REV A : R2004	Standard Test Method for Determining Apparent Opening Size of a Geotextile
ASTM D 4751 : 2021 : REV A	Standard Test Methods for Determining Apparent Opening Size of a Geotextile
ASTM D 5261 : 1992 : R1996	Standard Test Method for Measuring Mass per Unit Area of Geotextiles
ASTM D 4595 : 1986 : R1994	Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
ASTM D 4491 : 1999 : REV A : R2014 : EDT 1	Standard Test Methods for Water Permeability of Geotextiles by Permittivity
ASTM D 5261 : 1992 : R2009	Standard Test Method for Measuring Mass per Unit Area of Geotextiles
ASTM D 6241 : 2014	Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
ASTM D 4751 : 2012	Standard Test Method for Determining Apparent Opening Size of a Geotextile
ASTM D 6241 : 2004 : R2009	Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
ASTM D 4354 : 1999 : R2009	Standard Practice for Sampling of Geosynthetics for Testing
ASTM D 4595 : 2017	Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
ASTM D 6241 : 1999	Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
ASTM D 4354 : 2012 : REDLINE	Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products(RECPs) for Testing
ASTM D 4354 : 1999	Standard Practice for Sampling of Geosynthetics for Testing
ASTM D 4595 : 2009	Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
ASTM D 6241 : 2022	Standard Test Method for Static Puncture Index Strength of Geotextiles and Geotextile-Related Products Using a 50 mm Probe
ASTM D 123 : 2023	Standard Terminology Relating to Textiles
ASTM D 6241 : 2004	Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
ASTM D 4632 : 2008	Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
ASTM D 4751 : 2020 : REV B	Standard Test Methods for Determining Apparent Opening Size of a Geotextile
ASTM D 6241 : 2004 : R2009 : EDT 1	Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
ASTM D 4751 : 2016	Standard Test Methods for Determining Apparent Opening Size of a Geotextile
ASTM D 4355 : 2002	Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus
ASTM D 4491 : 1999 : REV A	Standard Test Methods for Water Permeability of Geotextiles by Permittivity
ASTM D 123 : 2001	Standard Terminology Relating to Textiles
ASTM D 4355 : 2005	Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus
ASTM D 4491 : 1999 : REV A : R2004	Standard Test Methods for Water Permeability of Geotextiles by Permittivity
ASTM D 4354 : 1999 : R2004	Standard Practice for Sampling of Geosynthetics for Testing
ASTM D 6241 : 2022 : REV A	Standard Test Method for Measuring Static Puncture Strength of Geotextiles and Geosynthetic-Related Products Using a 50 mm Probe
ASTM D 4632 : 1991 : R2003	Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
ASTM D 4595 : 2005	Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
ASTM D 4595 : 2017 : REDLINE	Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
ASQ Z1.9:2003 (R2013)	Sampling Procedures And Tables For Inspection By Variables For Percent Nonconforming