• There are no items in your cart

ASTM E 1000 : 2016 : REDLINE

Current
Current

The latest, up-to-date edition.

Standard Guide for Radioscopy
Available format(s)

PDF

Language(s)

English

Published date

12-01-2016

CONTAINED IN VOL. 03.03, 2017 Specifies practices and image quality measuring systems for real-time, and near real-time, nonfilm detection, display, and recording of radioscopic images.

1.1This guide is for tutorial purposes only and to outline the general principles of radioscopic imaging.

1.2This guide describes practices and image quality measuring systems for real-time, and near real-time, nonfilm detection, display, and recording of radioscopic images. These images, used in materials examination, are generated by penetrating radiation passing through the subject material and producing an image on the detecting medium. Although the described radiation sources are specifically X-ray and gamma-ray, the general concepts can be used for other radiation sources such as neutrons. The image detection and display techniques are nonfilm, but the use of photographic film as a means for permanent recording of the image is not precluded.

Note 1:For information purposes, refer to Terminology E1316.

1.3This guide summarizes the state of radioscopic technology prior to the advent of Digital Detector Arrays (DDAs), which may also be used for radioscopic imaging. For a summary of DDAs, see E2736, Standard Guide for Digital Detector Array Radiology. It should be noted that some detector configurations listed herein have similar foundations to those described in Guide E2736.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific safety precautionary statements, see Section 6.

Committee
E 07
DocumentType
Redline
Pages
26
PublisherName
American Society for Testing and Materials
Status
Current

17/30361503 DC : 0 BS EN ISO 20769-1 - NON-DESTRUCTIVE TESTING - RADIOGRAPHIC INSPECTION OF CORROSION AND DEPOSITS IN PIPES BY X- AND GAMMA RAYS - PART 1: TANGENTIAL RADIOGRAPHIC INSPECTION
10/30195039 DC : 0 BS EN ISO 17636-2 - NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING - PART 2: X- AND GAMMA-RAY TECHNIQUES WITH DIGITAL DETECTORS
BS EN 16407-2:2014 Non-destructive testing. Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays Double wall radiographic inspection
I.S. EN 16407-2:2014 NON-DESTRUCTIVE TESTING - RADIOGRAPHIC INSPECTION OF CORROSION AND DEPOSITS IN PIPES BY X- AND GAMMA RAYS - PART 2: DOUBLE WALL RADIOGRAPHIC INSPECTION
ASTM E 1817 : 2008 Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs)
EN 12681-2:2017 Founding - Radiographic testing - Part 2: Techniques with digital detectors
UNI EN ISO 17636-2 : 2013 NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING - PART 2: X- AND GAMMA-RAY TECHNIQUES WITH DIGITAL DETECTORS
BS EN 16407-1:2014 Non-destructive testing. Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays Tangential radiographic inspection
ASTM E 1165 : 2012 : R2017 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
ASTM E 2736 : 2017 : REDLINE Standard Guide for Digital Detector Array Radiography
ASTM C 1175 : 1999 : REV A : R2004 Standard Guide to Test Methods and Standards for Nondestructive Testing of Advanced Ceramics
BS EN ISO 17636-2:2013 Non-destructive testing of welds. Radiographic testing X- and gamma-ray techniques with digital detectors
ASTM E 2698 : 2010 Standard Practice for Radiological Examination Using Digital Detector Arrays
UNE-EN ISO 17636-2:2013 Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013)
UNI EN 16407-2 : 2014 NON-DESTRUCTIVE TESTING - RADIOGRAPHIC INSPECTION OF CORROSION AND DEPOSITS IN PIPES BY X- AND GAMMA RAYS - PART 2: DOUBLE WALL RADIOGRAPHIC INSPECTION
ASTM E 1817 : 2008 : R2014 Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs)
I.S. EN ISO 17636-2:2013 NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING - PART 2: X- AND GAMMA-RAY TECHNIQUES WITH DIGITAL DETECTORS (ISO 17636-2:2013)
ASTM E 2662 : 2015 : REDLINE Standard Practice for Radiographic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications
ASTM E 1165:2012 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
ASTM E 1161 : 2009 : R2014 Standard Practice for Radiologic Examination of Semiconductors and Electronic Components
BS EN 12681-2:2017 Founding. Radiographic testing Techniques with digital detectors
18/30338016 DC BS ISO 20890-6. In-service inspections for primary coolant circuit components of light water reactors Part 6. Radiographic testing
17/30361506 DC : 0 BS EN ISO 20769-2 - NON-DESTRUCTIVE TESTING - RADIOGRAPHIC INSPECTION OF CORROSION AN DEPOSITS IN PIPES BY X- AND GAMMA RAYS - PART 2: DOUBLE WALL RADIOGRAPHIC INSPECTION
ASTM E 801 : 2016 : REDLINE Standard Practice for Controlling Quality of Radiographic Examination of Electronic Devices
I.S. EN 16407-1:2014 NON-DESTRUCTIVE TESTING - RADIOGRAPHIC INSPECTION OF CORROSION AND DEPOSITS IN PIPES BY X- AND GAMMA RAYS - PART 1: TANGENTIAL RADIOGRAPHIC INSPECTION
ASTM C 1175 : 1999 : REV A : R2010 Standard Guide to Test Methods and Standards for Nondestructive Testing of Advanced Ceramics (Withdrawn 2018)
ISO 17636-2:2013 Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors
EN 16407-2:2014 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 2: Double wall radiographic inspection
EN ISO 17636-2:2013 Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013)
EN 16407-1:2014 Non-destructive testing - Radiographic inspection of corrosion and deposits in pipes by X- and gamma rays - Part 1: Tangential radiographic inspection
ABS 0014 : 2018 GUIDE FOR NONDESTRUCTIVE INSPECTION OF HULL WELDS
DIN EN ISO 17636-2:2013-05 Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013)
UNI EN 16407-1 : 2014 NON-DESTRUCTIVE TESTING - RADIOGRAPHIC INSPECTION OF CORROSION AND DEPOSITS IN PIPES BY X- AND GAMMA RAYS - PART 1: TANGENTIAL RADIOGRAPHIC INSPECTION
ASTM E 94/E94M : 2017 : REDLINE Standard Guide for Radiographic Examination Using Industrial Radiographic Film
I.S. EN 12681-2:2017 FOUNDING - RADIOGRAPHIC TESTING - PART 2: TECHNIQUES WITH DIGITAL DETECTORS
ASTM E 1161 : 2009 Standard Practice for Radiologic Examination of Semiconductors and Electronic Components
ASTM E 2982 : 2014 Standard Guide for Nondestructive Testing of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications
ASTM E 1453 : 2014 : REDLINE Standard Guide for Storage of Magnetic Tape Media that Contains Analog or Digital Radioscopic Data
ASTM E 1255 : 2016 : REDLINE Standard Practice for Radioscopy
ASTM C 1175 : 1999 : REV A Standard Guide to Test Methods and Standards for Nondestructive Testing of Advanced Ceramics

ASNT SNT TC 1A : 2016 TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL
ISO 9712:2012 Non-destructive testing Qualification and certification of NDT personnel
NAS410:2003 NAS CERTIFICATION & QUALIFICATION OF NONDESTRUCTIVE TEST PERSONNEL
CFR 21(PTS800-1299) : 0 FOOD AND DRUGS - FOOD AND DRUG ADMINISTRATION, CHAPTER 1 DEPARTMENT OF HEALTH AND HUMAN SERVICES - PARTS 800-1299
ASTM E 2736 : 2010 Standard Guide for Digital Detector Array Radiology
ASNT CP 189 : 2016 QUALIFICATION AND CERTIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL
ASTM E 2002 : 2015 : REDLINE Standard Practice for Determining Total Image Unsharpness and Basic Spatial Resolution in Radiography and Radioscopy
EN 4179:2017 Aerospace series - Qualification and approval of personnel for non-destructive testing

View more information
US$83.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.