• There are no items in your cart

ASTM E 1012 : 2014 : EDT 1

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
Available format(s)

Hardcopy , PDF

Superseded date

05-28-2020

Language(s)

English

Published date

05-10-2018

1.1Included in this practice are methods covering the determination of the amount of bending that occurs during the application of tensile and compressive forces to notched and unnotched test specimens during routine testing in the elastic range. These methods are particularly applicable to the force levels normally used for tension testing, creep testing, and uniaxial fatigue testing. The principal objective of this practice is to assess the amount of bending exerted upon a test specimen by the ordinary components assembled into a materials testing machine, during routine tests.

1.2This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
E 28
DocumentType
Standard Practice
Pages
18
ProductNote
ε1NOTE—10.5.2was editorially corrected in May 2018.
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM E 2789 : 2010 : R2015 Standard Guide for Fretting Fatigue Testing
ASTM C 1360 : 2017 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
ASTM E 2714 : 2013 Standard Test Method for Creep-Fatigue Testing
ASTM D 3552 : 2017 Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
ASTM D 3479/D3479M : 2019 Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
ASTM C 1361 : 2010 : R2019 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
ASTM D 3039/D3039M : 2017 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
ASTM C 1863 : 2018 Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Direct Pressurization
ASTM E 328 : 2013 Standard Test Methods for Stress Relaxation Tests for Materials and Structures
ASTM C 1275 : 2018 Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
ASTM D 7913/D7913M : 2014 Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing
ASTM C 1468 : 2019 : REV A Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
ASTM E 132 : 2017 Standard Test Method for Poisson’s Ratio at Room Temperature
ASTM C 1359 : 2018 : EDT 1 Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross Section Test Specimens at Elevated Temperatures
ASTM C 1862 : 2017 Standard Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures
ASTM C 1273 : 2018 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
ASTM E 647 : 2015 : EDT 1 Standard Test Method for Measurement of Fatigue Crack Growth Rates
ASTM E 143 : 2013 Standard Test Method for Shear Modulus at Room Temperature
ASTM E 139 : 2011 : R2018 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
ASTM C 1366 : 2004 : R2013 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
ASTM C 1424 : 2015 : R2019 Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
ASTM E 111 : 2017 Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus
ASTM C 1358 : 2018 Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross Section Test Specimens at Ambient Temperatures
ASTM E 2207 : 2015 Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens
ASTM F 1160 : 2014 : R2017 : EDT 1 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
ASTM C 1819 : 2015 Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Elastomeric Inserts
ASTM B 557 : 2015 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
ASTM D 7337/D7337M : 2012 : R2019 Standard Test Method for Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars
ASTM C 364/C364M : 2016 Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
ASTM C 1337 : 2017 Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures
ASTM D 638 : 2014 Standard Test Method for Tensile Properties of Plastics
ASTM E 466 : 2015 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
ASTM D 7205/D7205M : 2006 : R2016 Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
ASTM C 1869 : 2018 Standard Test Method for Open-Hole Tensile Strength of Fiber-Reinforced Advanced Ceramic Composites
ASTM E 2899 : 2015 Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending
ASTM C 1366 : 2019 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
ASTM E 8/E8M : 2016 : REV A : EDT 1 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 2899 : 2019 Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending
ASTM E 74 : 2018 : EDT 1 Standard Practices for Calibration and Verification for Force-Measuring Instruments
ASTM C 1773 : 2017 Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
ASTM C 1291 : 2018 Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics
ASTM E 1450 : 2016 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
ASTM D 7291/D7291M : 2015 Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
ASTM F 1801 : 1997 : R2014 Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials
ASTM E 606/E606M : 2012 Standard Test Method for Strain-Controlled Fatigue Testing
ASTM E 1856 : 2013 Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines
ASTM C 394/C394M : 2016 Standard Test Method for Shear Fatigue of Sandwich Core Materials
ASTM E 2368 : 2010 : R2017 Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
ASTM B 557M : 2015 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)

ASTM E 1237 : 1993 : R1998 Standard Guide for Installing Bonded Resistance Strain Gages
ASTM E 1237 : 1993 : R2009 Standard Guide for Installing Bonded Resistance Strain Gages
ASTM E 1237 : 1993 : R2003 Standard Guide for Installing Bonded Resistance Strain Gages
ASTM E 1237 : 1993 : R2014 Standard Guide for Installing Bonded Resistance Strain Gages

View more information
US$83.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.