ASTM E 1591 : 2013
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Guide for Obtaining Data for Fire Growth Models
Available format(s)
Hardcopy , PDF
Superseded date
08-25-2020
Language(s)
English
Published date
04-01-2013
CONTAINED IN VOL. 04.07, 2014 Defines data required as input for mathematical fire models.
1.3The emphasis in this guide is on ignition, pyrolysis and flame spread models for solid materials.
1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
| Committee |
E 05
|
| DocumentType |
Guide
|
| Pages |
9
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| 14/30301908 DC : 0 | BS ISO 16730-1 - FIRE SAFETY ENGINEERING - PROCEDURES AND REQUIREMENTS FOR VERIFICATION AND VALIDATION OF CALCULATION METHODS - PART 1: GENERAL |
| NFPA 909 : 2017 | PROTECTION OF CULTURAL RESOURCE PROPERTIES - MUSEUMS, LIBRARIES, AND PLACES OF WORSHIP |
| NFPA 150 : 2016 | FIRE AND LIFE SAFETY IN ANIMAL HOUSING FACILITIES |
| NFPA 914 : 2015 | FIRE PROTECTION OF HISTORIC STRUCTURES |
| NFPA 5000 : 2018 | BUILDING CONSTRUCTION AND SAFETY CODE |
| NFPA 400 : 2016 | HAZARDOUS MATERIALS CODE |
| NFPA 664 : 2017 | PREVENTION OF FIRES AND EXPLOSIONS IN WOOD PROCESSING AND WOODWORKING FACILITIES |
| NFPA 2 : 2016 | HYDROGEN TECHNOLOGIES CODE |
| NFPA 301 : 2018 | SAFETY TO LIFE FROM FIRE ON MERCHANT VESSELS |
| NFPA 1 : 2021 | FIRE CODE |
| UNE-ISO 16730-1:2017 | Fire safety engineering . Procedures and requirements for verification and validation of calculation methods . Part 1: General |
| BS ISO 16730-1:2015 | Fire safety engineering. Procedures and requirements for verification and validation of calculation methods General |
| NFPA 101 : 2018 | LIFE SAFETY CODE |
| ISO 16730-1:2015 | Fire safety engineering Procedures and requirements for verification and validation of calculation methods Part 1: General |
| ASTM D 7309 : 2019 | Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry |
| ASTM E 2280 : 2017 | Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities |
| ISO 16730:2008 | Fire safety engineering Assessment, verification and validation of calculation methods |
| ASTM D 7309 : 2013 : REDLINE | TEST METHOD FOR DETERMINING FLAMMABILITY CHARACTERISTICS OF PLASTICS AND OTHER SOLID MATERIALS USING MICROSCALE COMBUSTION CALORIMETRY |
| ASTM E 2280 : 2017 : REDLINE | Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities |
| NFPA 1 : 2018 | FIRE CODE |
| ASTM C 1371 : 2004 : REV A : R2010 : EDT 1 | Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers |
| ASTM E 1537 : 2016 : REDLINE | Standard Test Method for Fire Testing of Upholstered Furniture |
| ASTM E 1354 : 2010 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 2058 : 2001 | Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA) |
| ASTM E 2058 : 2006 | Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA) |
| ASTM E 1354 : 2014 : EDT 1 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM D 5865 : 2011 : REV A | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM C 518 : 2017 : REDLINE | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
| ASTM E 2058 : 2019 | Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA) |
| ASTM E 1321 : 1997 : REV A | Standard Test Method for Determining Material Ignition and Flame Spread Properties |
| ASTM E 2257 : 2013 : REV A | Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies |
| ASTM E 1623 : 2000 | Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) |
| ASTM E 1354 : 2004 : REV A | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 1354 : 1999 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 1623 : 2014 | Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) |
| ASTM E 1354 : 2010 : REV A | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 1354 : 2003 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 1537 : 2015 | Standard Test Method for Fire Testing of Upholstered Furniture |
| ASTM D 5865 : 2004 | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM E 1623 : 2003 : REV A | Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) |
| ASTM E 1354 : 2002 : REV D : EDT 1 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM D 5865 : 2000 | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM D 5865 : 2013 | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM E 1354 : 2008 : REV A | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM D 5865 : 2007 : REV A | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM D 5865 : 2003 | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM C 1371 : 1998 | Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers |
| ASTM E 1537 : 2016 | Standard Test Method for Fire Testing of Upholstered Furniture |
| ASTM E 1354 : 2002 : REV D | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM D 5865 : 1998 : REV A | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM D 5865 : 2003 : REV A | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM E 1537 : 2002 : REV A | Standard Test Method for Fire Testing of Upholstered Furniture |
| ASTM E 906 : 2009 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method |
| ASTM E 1623 : 2004 | Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) |
| ASTM E 2257 : 2016 | Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies |
| ASTM E 2058 : 2002 | Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA) |
| ASTM E 1321 : 2008 | Standard Test Method for Determining Material Ignition and Flame Spread Properties |
| ASTM D 5865 : 2013 : REDLINE | TEST METHOD FOR GROSS CALORIFIC VALUE OF COAL AND COKE |
| ASTM D 5865 : 1999 : REV A | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM E 1354 : 2009 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 2257 : 2013 | Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies |
| ASTM E 2257 : 2017 : REDLINE | Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies |
| ASTM E 1623 : 2002 : REV A | Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) |
| ASTM E 472 : 1986 | PRACTICE FOR REPORTING THERMO-ANALYTICAL DATA |
| ASTM D 2395 : 1993 : R1997 : EDT 1 | Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials |
| ASTM E 2257 : 2008 | Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies |
| ASTM E 1623 : 2002 : REV B | Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) |
| ASTM D 2395 : 2007 : REV A | Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials |
| ASTM E 1321 : 2018 | Standard Test Method for Determining Material Ignition and Flame Spread Properties |
| ASTM E 2058 : 2013 : REV A | Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA) |
| ASTM E 1537 : 2007 | Standard Test Method for Fire Testing of Upholstered Furniture |
| ASTM D 5865 : 2011 | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM E 1354 : 2015 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 2058 : 2002 : REV A | Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA) |
| ASTM E 1354 : 2016 : REV A | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM D 2395 : 2017 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials |
| ASTM E 1623 : 2011 | Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) |
| ASTM E 1321 : 2013 | Standard Test Method for Determining Material Ignition and Flame Spread Properties |
| ASTM D 5865 : 2012 | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM E 408 : 2013 : REDLINE | Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques |
| ASTM E 1354 : 2016 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 2257 : 2017 | Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies |
| ASTM D 2395 : 2014 : EDT 1 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials |
| ASTM C 1371 : 2015 : REDLINE | Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers |
| ASTM D 2395 : 2017 : REDLINE | Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials |
| ASTM C 1371 : 2004 | Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers |
| ASTM D 2395 : 2014 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials |
| ASTM E 1354 : 2017 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 1537 : 2002 | Standard Test Method for Fire Testing of Real Scale Upholstered Furniture |
| ASTM E 1354 : 2002 : REV A | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 2257 : 2003 | Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies |
| ASTM D 5865 : 2001 : REV A | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM D 2395 : 2006 | Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials |
| ASTM E 1354 : 2015 : REV A | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM D 5865 : 2001 : REV A : EDT 1 | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM E 1537 : 1999 | Standard Test Method for Fire Testing of Real Scale Upholstered Furniture |
| ASTM E 1354 : 2011 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 1354 : 2011 : REV B | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 2058 : 2000 | Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA) |
| ASTM E 2058 : 2009 | Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA) |
| ASTM D 5865 : 2010 : REV A | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM E 1354 : 2011 : REV A | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM D 2395 : 2007 : REV A : EDT 1 | Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials |
| ASTM E 1623 : 2001 : EDT 1 | Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) |
| ASTM C 1371 : 2004 : REV A | Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers |
| ASTM E 1537 : 2013 | Standard Test Method for Fire Testing of Upholstered Furniture |
| ASTM E 1321 : 2009 | Standard Test Method for Determining Material Ignition and Flame Spread Properties |
| ASTM D 5865 : 2007 | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM E 1537 : 2012 | Standard Test Method for Fire Testing of Upholstered Furniture |
| ASTM D 5865 : 2002 | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM D 5865 : 2001 | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM E 537 : 2012 : REDLINE | Standard Test Method for The Thermal Stability of Chemicals by Differential Scanning Calorimetry |
| ASTM D 2395 : 2002 | Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials |
| ASTM E 2058 : 2003 | Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA) |
| ASTM C 1371 : 2015 | Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers |
| ASTM E 1354 : 2004 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 1354 : 2013 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 1354 : 2014 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 1537 : 2001 | Standard Test Method for Fire Testing of Real Scale Upholstered Furniture |
| ASTM E 1623 : 2009 | Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) |
| ASTM E 1354 : 2017 : REDLINE | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 1623 : 2016 | Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) |
| ASTM E 1623 : 2016 : REDLINE | Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) |
| ASTM D 5865 : 2010 : REV A : EDT 1 | Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM D 5865 : 2010 | Standard Test Method for Gross Calorific Value of Coal and Coke |
US$75.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.