ASTM E 176 : 2018 : REV A

Name: ASTM E 176 : 2018 : REV A
Brand: ASTM
Price: 90.00 USD

Superseded

View Superseded by

Standard Terminology of Fire Standards

Available format(s)

Hardcopy , PDF

Superseded date

07-02-2021

Language(s)

English

Published date

12-15-2018

Publisher

American Society for Testing and Materials

This terminology covers terms, related definitions, and descriptions of terms used or likely to be used in fire-test-response standards, fire-hazard-assessment standards, and fire-risk-assessment standards.

1.1This terminology covers terms, related definitions, and descriptions of terms used or likely to be used in fire-test-response standards, fire-hazard-assessment standards, and fire-risk-assessment standards. Definitions of terms are special-purpose definitions that are consistent with the standard definitions but are written to ensure that a specific fire-test-response standard, fire-hazard-assessment standard, or fire-risk-assessment standard is properly understood and precisely interpreted.

Note 1:For additional information, refer to ASTM Policy on Fire Standards.2

1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.3This fire standard cannot be used to provide quantitative measures.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	E 05
DocumentType	Reference Material
Pages	27
PublisherName	American Society for Testing and Materials
Status	Superseded
SupersededBy	ASTM E 176 : 2018 : REV A : EDT 1
Supersedes	ASTM E 176 : 2018 ASTM E 176 : 2015 : REV A : EDT 1

ASTM E 1995 : 1998	Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally
ASTM E 2032 : 2009 : R2017	Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119
ASTM E 1474 : 1996 : REV A	Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
ASTM E 1546 : 2015	Standard Guide for Development of Fire-Hazard-Assessment Standards
ASTM E 1354 : 2010	Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 2226 : 2007	Standard Practice for Application of Hose Stream
ASTM E 2061 : 2003	Guide for Fire Hazard Assessment of Rail Transportation Vehicles
ASTM E 2335 : 2017	Standard Guide for Laboratory Monitors
ASTM E 2058 : 2001	Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM C 1224 : 2015	Standard Specification for Reflective Insulation for Building Applications
ASTM E 2707 : 2015	Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure
ASTM E 2058 : 2006	Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM E 1740 : 2009	Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
ASTM E 1590 : 2002	Standard Test Method for Fire Testing of Mattresses
ASTM E 2187 : 2004	Standard Test Method for Measuring the Ignition Strength of Cigarettes
ASTM E 1354 : 2014 : EDT 1	Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 2652 : 2016	Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C
ASTM D 5865 : 2011 : REV A	Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM E 2912 : 2013	Standard Test Method for Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction
ASTM E 2187 : 2020 : REV A	Standard Test Method for Measuring the Ignition Strength of Cigarettes
ASTM E 2573 : 2012	Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics
ASTM E 2067 : 2002	Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
ASTM E 1590 : 1999	Standard Test Method for Fire Testing of Mattresses
ASTM E 1317 : 2008 : REV A	Standard Test Method for Flammability of Marine Surface Finishes
ASTM E 1678 : 1997	Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis
ASTM E 1509 : 1995 : R2000	Standard Specification for Room Heaters, Pellet Fuel-Burning Type
ASTM E 2032 : 2007 : REV A	Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119
ASTM E 1822 : 2017	Standard Test Method for Fire Testing of Stacked Chairs
ASTM E 2231 : 2002 : EDT 1	Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
ASTM E 2653 : 2008	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer Than Six Participating Laboratories
ASTM E 2816 : 2012	Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems
ASTM E 2280 : 2003	Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities
ASTM C 1313 : 2005	Standard Specification for Sheet Radiant Barriers for Building Construction Applications
ASTM E 3082 : 2017	Standard Test Methods for Determining the Effectiveness of Fire Retardant Treatments for Natural Christmas Trees
ASTM D 3675 : 2005	Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
ASTM E 2226 : 2015 : REV B : R2019	Standard Practice for Application of Hose Stream
ASTM E 2226 : 2002	Standard Practice for Application of Hose Stream
ASTM E 2653 : 2009	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer Than Six Participating Laboratories
ASTM E 1474 : 2014	Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
ASTM E 2404 : 2012	Standard Practice for Specimen Preparation and Mounting of Wall or Ceiling Coverings to Assess Surface Burning Characteristics
ASTM E 2749 : 2010	Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
ASTM E 1353 : 1999	Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture
ASTM E 2307 : 2020	Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
ASTM C 1224 : 2009	Standard Specification for Reflective Insulation for Building Applications
ASTM E 2816 : 2017	Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems
ASTM E 2058 : 2019	Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM E 2187 : 2009	Standard Test Method for Measuring the Ignition Strength of Cigarettes
ASTM E 1321 : 1997 : REV A	Standard Test Method for Determining Material Ignition and Flame Spread Properties
ASTM E 2599 : 2009	Standard Practice for Specimen Preparation and Mounting of Reflective Insulation Materials and Radiant Barrier Materials for Building Applications to Assess Surface Burning Characteristics
ASTM E 2257 : 2013 : REV A	Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
ASTM E 1740 : 2020	Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
ASTM E 2061 : 2009	Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles
ASTM E 1546 : 2009 : REV A	Standard Guide for Development of Fire-Hazard-Assessment Standards
ASTM E 1623 : 2000	Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
ASTM D 3675 : 2009 : REV A	Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
ASTM E 1354 : 2004 : REV A	Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 1354 : 1999	Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 2536 : 2015	Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
ASTM E 1352 : 2002	Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies
ASTM E 1623 : 2014	Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
ASTM E 1474 : 2001	Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
ASTM D 3675 : 2009	Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
ASTM E 1354 : 2010 : REV A	Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 2652 : 2018	Standard Test Method for Assessing Combustibility of Materials Using a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C
ASTM E 1529 : 2000	Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
ASTM E 2837 : 2013	Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies
ASTM E 1995 : 2018	Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally
ASTM E 1474 : 2020	Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
ASTM E 1678 : 2015	Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis
ASTM E 1474 : 2004 : EDT 1	Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
ASTM E 1529 : 2016 : EDT 1	Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
ASTM E 2816 : 2012 : REV A	Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems
ASTM E 1352 : 2008 : REV A	Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies
ASTM E 1740 : 2001	Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
ASTM E 1354 : 2003	Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 1537 : 2015	Standard Test Method for Fire Testing of Upholstered Furniture
ASTM D 5865 : 2004	Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM E 1678 : 2002	Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis
ASTM E 2336 : 2016	Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems
ASTM E 1529 : 2010	Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
ASTM E 1623 : 2003 : REV A	Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
ASTM E 2067 : 2000 : REV A	Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
ASTM E 2707 : 2014	Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure
ASTM E 1590 : 2017	Standard Test Method for Fire Testing of Mattresses
ASTM E 2061 : 2002 : REV A	Guide for Fire Hazard Assessment of Rail Transportation Vehicles
ASTM E 2061 : 2001 : REV A	Guide for Fire Hazard Assessment of Rail Transportation Vehicles
ASTM E 2226 : 2015	Standard Practice for Application of Hose Stream
ASTM E 2573 : 2007	Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics
ASTM E 2226 : 2015 : REV B	Standard Practice for Application of Hose Stream
ASTM D 3675 : 2014	Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
ASTM E 1354 : 2002 : REV D : EDT 1	Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM C 1224 : 2001	Standard Specification for Reflective Insulation for Building Applications
ASTM E 3048 : 2017	Standard Test Method for Determination of Time to Burn-Through Using the Intermediate Scale Calorimeter (ICAL) Radiant Panel
ASTM D 5865 : 2000	Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM E 2102 : 2011	Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E 2749 : 2010 : R2014	Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
ASTM E 2231 : 2014	Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
ASTM E 2536 : 2015 : REV A	Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
ASTM E 1317 : 1997 : REV A : R2002	Standard Test Method for Flammability of Marine Surface Finishes
ASTM E 1590 : 2016	Standard Test Method for Fire Testing of Mattresses
ASTM E 2404 : 2009	Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics
ASTM E 2230 : 2008	Standard Practice for Thermal Qualification of Type B Packages for Radioactive Material
ASTM E 1474 : 2002	Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
ASTM E 2652 : 2009 : EDT 1	Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750<span class='unicode'>°</span>C
ASTM D 5865 : 2013	Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM E 2404 : 2006	Standard Practice for Specimen Preparation and Mounting of Paper or Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics
ASTM E 2573 : 2007 : REV A	Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics
ASTM E 1509 : 2012 : R2017	Standard Specification for Room Heaters, Pellet Fuel-Burning Type
ASTM E 1354 : 2008 : REV A	Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM D 5865 : 2007 : REV A	Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM D 5865 : 2003	Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM E 1537 : 2016	Standard Test Method for Fire Testing of Upholstered Furniture
ASTM E 1354 : 2002 : REV D	Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 1317 : 1997 : REV A	Standard Test Method for Flammability of Marine Surface Finishes
ASTM E 2067 : 2015	Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
ASTM E 1529 : 2014 : REV A	Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
ASTM D 5865 : 1998 : REV A	Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM E 2231 : 2019	Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
ASTM E 1474 : 2007	Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
ASTM D 5865 : 2003 : REV A	Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM E 1537 : 2002 : REV A	Standard Test Method for Fire Testing of Upholstered Furniture
ASTM E 2336 : 2004	Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems
ASTM E 2230 : 2013	Standard Practice for Thermal Qualification of Type B Packages for Radioactive Material
ASTM E 2336 : 2004 : R2009	Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems
ASTM E 2957 : 2017	Standard Test Method for Resistance to Wildfire Penetration of Eaves, Soffits and Other Projections
ASTM E 2653 : 2015	Standard Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Fire Test Method with Fewer Than Six Participating Laboratories
ASTM E 2404 : 2015	Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) Wall or Ceiling Coverings, and of Facings and Wood Veneers Intended to be Applied on Site Over a Wood Substrate, to Assess Surface Burning Characteristics
ASTM E 2226 : 2008	Standard Practice for Application of Hose Stream
ASTM E 2690 : 2017 : REV A	Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics
ASTM E 2336 : 2020	Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems
ASTM E 1822 : 2002 : REV B	Standard Test Method for Fire Testing of Stacked Chairs
ASTM E 1623 : 2004	Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
ASTM E 2067 : 2003	Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
ASTM E 2257 : 2016	Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
ASTM E 2187 : 2002	Standard Test Method for Measuring the Ignition Strength of Cigarettes
ASTM E 1678 : 2010	Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis
ASTM E 1513 : 1993 : R2011	Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)
ASTM E 1529 : 2013	Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
ASTM E 2058 : 2002	Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM E 1321 : 2008	Standard Test Method for Determining Material Ignition and Flame Spread Properties
ASTM E 2231 : 2007 : REV A	Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
ASTM E 2061 : 2006	Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles
ASTM E 2837 : 2011	Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies
ASTM D 5865 : 1999 : REV A	Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM E 2187 : 2016	Standard Test Method for Measuring the Ignition Strength of Cigarettes
ASTM E 2335 : 2004	Standard Guide for Laboratory Monitors
ASTM E 1354 : 2009	Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 2280 : 2017	Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities
ASTM E 2231 : 2002	Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
ASTM E 2688 : 2010	Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics
ASTM E 2816 : 2018 : REV A	Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems
ASTM E 2257 : 2013	Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
ASTM E 1317 : 2008 : REV B	Standard Test Method for Flammability of Marine Surface Finishes
ASTM E 2404 : 2013	Standard Practice for Specimen Preparation and Mounting of Wall or Ceiling Coverings to Assess Surface Burning Characteristics
ASTM E 1353 : 2002	Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture
ASTM E 1623 : 2002 : REV A	Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
ASTM E 2061 : 2001 : EDT 1	Guide for Fire Hazard Assessment of Rail Transportation Vehicles
ASTM E 2404 : 2005	Standard Practice for Specimen Preparation and Mounting of Paper or Vinyl Wall Coverings to Assess Surface Burning Characteristics
ASTM E 2032 : 2008 : REV A	Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119
ASTM E 2257 : 2008	Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
ASTM E 2307 : 2015 : REV B : EDT 1	Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
ASTM E 1623 : 2002 : REV B	Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
ASTM E 1474 : 2004	Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
ASTM E 1529 : 2006	Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
ASTM E 2280 : 2003 : EDT 1	Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities
ASTM E 1321 : 2018	Standard Test Method for Determining Material Ignition and Flame Spread Properties
ASTM E 2102 : 2013	Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E 2599 : 2015	Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics
ASTM C 1224 : 1999	Standard Specification for Reflective Insulation for Building Applications
ASTM E 2058 : 2013 : REV A	Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM E 1537 : 2007	Standard Test Method for Fire Testing of Upholstered Furniture
ASTM E 2280 : 2013	Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities
ASTM D 5865 : 2011	Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM E 2599 : 2016	Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics
ASTM E 2536 : 2006	Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
ASTM E 1546 : 2000	Standard Guide for Development of Fire-Hazard-Assessment Standards
ASTM E 1529 : 2016	Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
ASTM E 2307 : 2015 : REV A	Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
ASTM E 1995 : 2008	Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally
ASTM E 2957 : 2015	Standard Test Method for Resistance to Wildfire Penetration of Eaves, Soffits and Other Projections
ASTM E 2032 : 2009	Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119
ASTM E 1995 : 2004 : REV A	Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally
ASTM C 1224 : 2011	Standard Specification for Reflective Insulation for Building Applications
ASTM E 1354 : 2015	Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 2226 : 2010	Standard Practice for Application of Hose Stream
ASTM E 2058 : 2002 : REV A	Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM E 2404 : 2008	Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics
ASTM E 2573 : 2019	Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics
ASTM E 2061 : 2000 : REV B	Guide for Fire Hazard Assessment of Rail Transportation Vehicles
ASTM E 1354 : 2016 : REV A	Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 1678 : 2008	Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis
ASTM E 2231 : 2009	Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
ASTM E 2307 : 2015 : REV B	Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
ASTM E 2307 : 2010	Standard Test Method for Determining Fire Resistance of Perimeter Fire Barrier Systems Using Intermediate-Scale, Multi-story Test Apparatus
ASTM D 3675 : 2001	Standard Test Method for Surface Flammability of Flexible Cellular Materials Using A Radiant Heat Energy Source
ASTM D 3675 : 2008	Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
ASTM E 1353 : 2016	Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture
ASTM E 2231 : 2007	Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
ASTM E 1353 : 2008 : REV A : EDT 1	Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture
ASTM E 2307 : 2004	Standard Test Method for Determining Fire Resistance of Perimeter Fire Barrier Systems Using Intermediate-Scale, Multi-story Test Apparatus
ASTM E 3048 : 2016	Standard Test Method for Determination of Time to Burn-Through Using the Intermediate Scale Calorimeter (ICAL) Radiant Panel
ASTM E 2816 : 2011	Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems
ASTM E 2573 : 2017	Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics
ASTM E 2187 : 2020	Standard Test Method for Measuring the Ignition Strength of Cigarettes
ASTM E 2690 : 2010 : EDT 2	Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics
ASTM E 1740 : 2015	Standard Test Method for Determining the Heat Release Rate and Other<brk/> Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
ASTM E 2749 : 2015	Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
ASTM E 2653 : 2014	Standard Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Fire Test Method with Fewer Than Six Participating Laboratories
ASTM E 1355 : 1997	Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models
ASTM E 2404 : 2013 : EDT 1	Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) Wall or Ceiling Coverings, and of Facings and Wood Veneers Intended to be Applied on Site Over a Wood Substrate, to Assess Surface Burning Charact
ASTM E 2336 : 2004 : R2013	Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems
ASTM D 3675 : 2019	Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
ASTM E 1740 : 2002	Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
ASTM E 1623 : 2011	Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
ASTM E 2307 : 2019	Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
ASTM E 1321 : 2013	Standard Test Method for Determining Material Ignition and Flame Spread Properties
ASTM E 2061 : 2009 : REV A	Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles
ASTM E 2816 : 2015 : REV A	Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems
ASTM E 1355 : 2004 : REV A	Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models
ASTM E 1822 : 2002 : REV A	Standard Test Method for Fire Testing of Stacked Chairs
ASTM E 2187 : 2002 : REV B	Standard Test Method for Measuring the Ignition Strength of Cigarettes
ASTM E 2816 : 2015	Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems
ASTM E 1740 : 2000	Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
ASTM E 2837 : 2013 : R2017	Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies
ASTM D 5865 : 2012	Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM E 1590 : 2012	Standard Test Method for Fire Testing of Mattresses
ASTM E 2231 : 2018	Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
ASTM E 2102 : 2015	Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM D 3675 : 2016	Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
ASTM E 2404 : 2010	Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics
ASTM E 1355 : 2012	Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models
ASTM E 1678 : 2008 : REV B	Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis
ASTM E 1353 : 2008	Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture
ASTM E 1822 : 2009	Standard Test Method for Fire Testing of Stacked Chairs
ASTM E 2599 : 2010	Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics
ASTM E 1354 : 2016	Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 2226 : 2011	Standard Practice for Application of Hose Stream
ASTM E 2257 : 2017	Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
ASTM E 1995 : 2016	Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally
ASTM E 2226 : 2010 : EDT 1	Standard Practice for Application of Hose Stream
ASTM E 2335 : 2008	Standard Guide for Laboratory Monitors
ASTM E 2536 : 2009	Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
ASTM E 3048 : 2019 : REV A	Standard Test Method for Determination of Time to Burn-Through Using the Intermediate Scale Calorimeter (ICAL) Radiant Panel
ASTM E 2652 : 2009	Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750<span class='unicode'>°</span>C
ASTM E 2404 : 2015 : REV A	Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) and Wood Wall or Ceiling Coverings, Facings and Veneers, to Assess Surface Burning Characteristics
ASTM E 1352 : 2008	Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies
ASTM E 2187 : 2002 : REV A	Standard Test Method for Measuring the Ignition Strength of Cigarettes
ASTM E 1355 : 2005 : REV A	Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models
ASTM E 1354 : 2017	Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 2599 : 2011	Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics
ASTM E 2102 : 2008	Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E 2749 : 2015 : REV A	Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
ASTM E 1537 : 2002	Standard Test Method for Fire Testing of Real Scale Upholstered Furniture
ASTM E 1740 : 2007	Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
ASTM E 2307 : 2015	Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
ASTM E 2226 : 2015 : REV A	Standard Practice for Application of Hose Stream
ASTM E 2102 : 2011 : REV A	Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E 1740 : 2010	Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
ASTM E 1354 : 2002 : REV A	Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 2404 : 2017	Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) and Wood Wall or Ceiling Coverings, Facings and Veneers, to Assess Surface Burning Characteristics
ASTM E 2257 : 2003	Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
ASTM E 1740 : 2020 : REV A	Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
ASTM D 5865 : 2001 : REV A	Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM E 2061 : 2015	Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles
ASTM E 1590 : 2007	Standard Test Method for Fire Testing of Mattresses
ASTM E 2067 : 2020	Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
ASTM E 1546 : 2000 : EDT 1	Standard Guide for Development of Fire-Hazard-Assessment Standards
ASTM E 2652 : 2009 : REV A	Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750<span class='unicode'>°</span>C
ASTM E 1354 : 2015 : REV A	Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 2067 : 2008	Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
ASTM E 2102 : 2014	Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E 1678 : 2008 : REV A	Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis
ASTM D 5865 : 2001 : REV A : EDT 1	Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM E 1740 : 2007 : REV A	Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
ASTM E 1537 : 1999	Standard Test Method for Fire Testing of Real Scale Upholstered Furniture
ASTM E 1354 : 2011	Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 2061 : 2012	Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles
ASTM E 2102 : 2004 : REV A	Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E 2749 : 2015 : REV A : R2019	Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
ASTM E 1590 : 2001	Standard Test Method for Fire Testing of Mattresses
ASTM E 1354 : 2011 : REV B	Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM C 1224 : 2003	Standard Specification for Reflective Insulation for Building Applications
ASTM E 1529 : 2014	Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
ASTM E 2058 : 2000	Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM E 2058 : 2009	Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM E 2688 : 2018	Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics
ASTM E 2067 : 2012	Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
ASTM D 5865 : 2010 : REV A	Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM E 1678 : 2009	Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis
ASTM C 1313 : 2000	Standard Specification for Sheet Radiant Barriers for Building Construction Applications
ASTM E 1822 : 2013	Standard Test Method for Fire Testing of Stacked Chairs
ASTM E 1353 : 2008 : REV A	Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture
ASTM E 1995 : 2012	Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally
ASTM E 3048 : 2019	Standard Test Method for Determination of Time to Burn-Through Using the Intermediate Scale Calorimeter (ICAL) Radiant Panel
ASTM E 2816 : 2018	Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems
ASTM E 1354 : 2011 : REV A	Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 2536 : 2014	Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
ASTM E 2336 : 2014	Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems
ASTM E 2690 : 2010	Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics
ASTM D 3675 : 2017	Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
ASTM E 1623 : 2001 : EDT 1	Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
ASTM E 3082 : 2017 : EDT 1	Standard Test Methods for Determining the Effectiveness of Fire Retardant Treatments for Natural Christmas Trees
ASTM E 1352 : 1999	Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies
ASTM E 1509 : 2012	Standard Specification for Room Heaters, Pellet Fuel-Burning Type
ASTM E 1537 : 2013	Standard Test Method for Fire Testing of Upholstered Furniture
ASTM E 1352 : 2016	Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies (Withdrawn 2022)
ASTM E 1321 : 2009	Standard Test Method for Determining Material Ignition and Flame Spread Properties
ASTM D 5865 : 2007	Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM E 2816 : 2020	Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems
ASTM E 2226 : 2012	Standard Practice for Application of Hose Stream
ASTM C 1224 : 2015 : R2020	Standard Specification for Reflective Insulation for Building Applications
ASTM E 1317 : 2019	Standard Test Method for Flammability of Surface Finishes
ASTM E 1546 : 2009	Standard Guide for Development of Fire-Hazard-Assessment Standards
ASTM E 2230 : 2002	Standard Practice for Thermal Qualification of Type B Packages for Radioactive Material
ASTM E 2688 : 2016	Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics
ASTM E 1537 : 2012	Standard Test Method for Fire Testing of Upholstered Furniture
ASTM E 2912 : 2017	Standard Test Method for Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction
ASTM D 3675 : 2011	Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
ASTM D 3675 : 2012	Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
ASTM E 2690 : 2017	Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics
ASTM E 1678 : 2007	Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis
ASTM D 5865 : 2002	Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM D 3675 : 1998	Standard Test Method for Surface Flammability of Flexible Cellular Materials Using A Radiant Heat Energy Source
ASTM E 2690 : 2017 : REV B	Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics
ASTM D 5865 : 2001	Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM E 2690 : 2010 : EDT 1	Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics
ASTM E 1474 : 2010	Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
ASTM E 1513 : 1993 : R2005 : EDT 1	Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)
ASTM E 2816 : 2020 : REV A	Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems
ASTM E 1509 : 2004	Standard Specification for Room Heaters, Pellet Fuel-Burning Type
ASTM E 1546 : 2007	Standard Guide for Development of Fire-Hazard-Assessment Standards
ASTM E 2599 : 2018	Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics
ASTM E 2231 : 2015	Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
ASTM E 1355 : 2012 : R2018	Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models
ASTM E 2061 : 2000 : REV A	Guide for Fire Hazard Assessment of Rail Transportation Vehicles
ASTM E 2102 : 2000	Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E 2102 : 2004	Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E 2405 : 2005	Standard Test Method for Determination of Fire and Thermal Parameters of Materials Using an Intermediate Scale Test with Vertically Oriented Specimen (Withdrawn 2011)
ASTM E 2032 : 2009 : R2013	Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119
ASTM E 1995 : 2004	Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally
ASTM E 2058 : 2003	Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM E 1822 : 2002	Standard Test Method for Fire Testing of Stacked Chairs
ASTM E 2404 : 2007	Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics
ASTM E 2599 : 2009 : REV A	Standard Practice for Specimen Preparation and Mounting of Reflective Insulation Materials and Radiant Barrier Materials for Building Applications to Assess Surface Burning Characteristics
ASTM E 1354 : 2004	Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 1822 : 2012	Standard Test Method for Fire Testing of Stacked Chairs
ASTM E 1354 : 2013	Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 1354 : 2014	Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E 1537 : 2001	Standard Test Method for Fire Testing of Real Scale Upholstered Furniture
ASTM E 1317 : 2012	Standard Test Method for Flammability of Marine Surface Finishes
ASTM E 1822 : 2007	Standard Test Method for Fire Testing of Stacked Chairs
ASTM E 1513 : 1993 : R2000	Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)
ASTM E 2102 : 2009	Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E 2404 : 2007 : REV A	Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics
ASTM E 1623 : 2009	Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
ASTM E 2102 : 2017	Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
ASTM E 2707 : 2009	Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure
ASTM E 1623 : 2016	Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
ASTM E 2307 : 2004 : EDT 1	Standard Test Method for Determining Fire Resistance of Perimeter Fire Barrier Systems Using Intermediate-Scale, Multi-story Test Apparatus
ASTM E 1590 : 2013	Standard Test Method for Fire Testing of Mattresses
ASTM D 5865 : 2010 : REV A : EDT 1	Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM E 2335 : 2012	Standard Guide for Laboratory Monitors
ASTM E 2280 : 2009	Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities
ASTM E 1355 : 2011	Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models
ASTM D 5865 : 2010	Standard Test Method for Gross Calorific Value of Coal and Coke
ASTM E 2816 : 2013 : REV A	Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems
ASTM E 2816 : 2013	Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems
ASTM E 2032 : 1999 : EDT 1	Standard Guide for Extension of Data From Fire Endurance Tests
ASTM E 2652 : 2012	Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C