ASTM E 3152 : 2018
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Guide for Standard Test Methods and Practices Available for Determining Antifungal Activity on Natural or Synthetic Substrates Treated with Antimicrobial Agents
Superseded date
04-29-2023
Published date
03-29-2018
CONTAINED IN VOL. 11.08, 2018 Gives information on various test methods currently available to assess antifungal activity on natural or synthetic substrates.
1.1This guide provides information on various test methods currently available to assess antifungal activity on natural or synthetic substrates.
1.2Knowledge of microbiological techniques is required for the practice of this guide.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Committee |
E 35
|
| DocumentType |
Guide
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
| ASTM E 3227 : 2020 | Standard Test Practice for Qualitative Assessment of Antifungal Activity on Textiles |
| ASTM E 1326 : 1998 | Standard Guide for Evaluating Nonconventional Microbiological Tests Used for Enumerating Bacteria |
| ASTM F 1094 : 1987 : R2020 | Standard Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method (Withdrawn 2023) |
| ASTM F 1094 : 1987 : R1999 | Standard Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method |
| ASTM D 6469 : 2004 | Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
| ASTM E 1326 : 2015 | Standard Guide for Evaluating Non-culture Microbiological Tests Used for Enumerating Bacteria |
| ASTM D 3456 : 2018 | Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack |
| ASTM D 6974 : 2016 | Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures |
| ASTM E 1326 : 2015-07 | GUIDE FOR EVALUATING NON-CULTURE MICROBIOLOGICAL TESTS |
| ASTM D 4141/D4141M : 2022 | Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings |
| ASTM D 7855/D7855M : 2013 : R2021 | Standard Test Method for Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation |
| ASTM E 1326 : 2015 : REV A | Standard Guide for Evaluating Non-culture Microbiological Tests |
| ASTM D 4576 : 2001 | Standard Test Method for Mold Growth Resistance of Wet Blue |
| ASTM D 6974 : 2009 : R2013 : EDT 2 | Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures |
| ASTM D 5259 : 2014 | Standard Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure |
| ASTM E 2471 : 2005 | Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity In Carpets |
| ASTM D 4576 : 2016 : R2021 | Standard Test Method for Mold Growth Resistance of Wet Blue and Wet White |
| BS EN 1104:2005 | Paper and board intended to come into contact with foodstuffs. Determination of the transfer of antimicrobial constituents |
| ASTM D 3273 : 2000 : R2005 | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM D 3273 : 2012 : EDT 1 | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM D 3456 : 1986 : R1996 | Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack |
| ASTM D 6329 : 1998 : R2008 | Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers |
| AATCC TM 90 : 2011(R2016) | ANTIBACTERIAL ACTIVITY ASSESSMENT OF TEXTILE MATERIALS: AGAR PLATE METHOD |
| ASTM D 3273 : 2012 | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM D 4141/D4141M : 2014 : REDLINE | Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings |
| ASTM D 4783 : 2001 | Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi |
| ASTM D 6329 : 1998 : R2003 | Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers |
| ASTM E 2197 : 2002 | Standard Quantitative Disk Carrier Test Method for Determining the Bactericidal, Virucidal, Fungicidal, Mycobactericidal and Sporicidal Activities of Liquid Chemical Germicides |
| ASTM G 21 : 2015 : REDLINE | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
| ASTM E 1326 : 2006 | Standard Guide for Evaluating Nonconventional Microbiological Tests Used for Enumerating Bacteria |
| ASTM D 6469 : 2012 | Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| ASTM D 3273 : 1986 : R1991 : EDT 1 | Standard Test Method for Resistance to Growth of Moid on the Surface of Interior Coatings in an Enviormental Chamber |
| ASTM D 5259 : 1992 : R2000 | Standard Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure |
| ASTM D 2020 : 1992 : R2003 | Standard Test Methods for Mildew (Fungus) Resistance of Paper and Paperboard (Withdrawn 2009) |
| ASTM C 1338 : 2000 | Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings |
| ASTM F 1094 : 1987 : R2005 | Standard Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method |
| ASTM D 4445 : 2009 | Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method) |
| ASTM D 4300 : 2001 : R2013 | Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi |
| ASTM D 7436 : 2012 | Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology |
| ASTM D 6469 : 2008 | Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
| ASTM D 4783 : 2001 : EDT 1 | Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi |
| ASTM D 6974 : 2009 : R2013 | Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures |
| ASTM D 7910 : 2014 | Standard Practice for Collection of Fungal Material From Surfaces by Tape Lift |
| ASTM D 5590 : 2000 : R2010 : EDT 1 | Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay |
| ASTM E 1326 : 2008 | Standard Guide for Evaluating Nonconventional Microbiological Tests Used for Enumerating Bacteria |
| ASTM D 4445 : 2010 : R2015 | Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method) |
| ASTM C 1338 : 2014 | Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings |
| ASTM D 7855/D7855M : 2013 : R2017 | Standard Test Method for Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation |
| ASTM D 4445 : 1991 : R1996 : EDT 1 | Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method) |
| ISO 846:1997 | Plastics Evaluation of the action of microorganisms |
| ASTM D 5259 : 1992 : R2012 | Standard Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure |
| ASTM E 2722 : 2014 | Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity in Fabric and Air Filter Media (Withdrawn 2022) |
| ASTM D 4445 : 2003 | Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method) |
| ASTM D 3456 : 1986 : R2008 | Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack |
| ASTM D 4445 : 2009 : REV A | Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method) |
| ASTM D 4300 : 2001 | Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi |
| ASTM D 4783 : 1998 : REV A | Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi |
| ASTM D 5259 : 1992 : R2006 | Standard Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure |
| ASTM C 1338 : 2019 | Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings |
| ASTM D 3456 : 1986 : R2002 | Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack |
| ASTM C 1338 : 2008 | Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings |
| ASTM D 4576 : 2008 | Standard Test Method for Mold Growth Resistance of Wet Blue |
| ASTM D 7436 : 2017 : REDLINE | Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology |
| ASTM D 6469 : 2014 | Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
| ASTM E 2111 : 2012 | Standard Quantitative Carrier Test Method to Evaluate the Bactericidal, Fungicidal, Mycobactericidal, and Sporicidal Potencies of Liquid Chemicals |
| ASTM E 2471 : 2005 : R2011 : EDT 1 | Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity In Carpets |
| ASTM C 1338 : 2019 : R2022 | Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings |
| ASTM D 3273 : 2021 | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM D 4141/D4141M : 2014 | Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings |
| ASTM D 4576 : 1986 : R1996 | Standard Test Method for Mold Growth Resistance of Wet Blue |
| ASTM D 4300 : 1998 : REV A | Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi |
| ASTM E 2111 : 2000 | Standard Quantitative Carrier Test Method To Evaluate the Bactericidal, Fungicidal, Mycobactericidal and Sporicidal Potencies of Liquid Chemical Germicides |
| ASTM D 7436 : 2017 | Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology |
| ASTM E 2197 : 2017 | Standard Quantitative Disk Carrier Test Method for Determining Bactericidal, Virucidal, Fungicidal, Mycobactericidal, and Sporicidal Activities of Chemicals |
| ISO 16256:2012 | Clinical laboratory testing and in vitro diagnostic test systems Reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases |
| ASTM E 2471 : 2005 : R2016 | Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity In Carpets |
| ASTM D 5590 : 1994 | Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay |
| ASTM D 5590 : 2017 : R2021 | Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay |
| ASTM D 6974 : 2009 : R2013 : EDT 1 | Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures |
| ASTM D 6974 : 2009 | Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures |
| TAPPI T 487 : 0 | FUNGUS RESISTANCE OF PAPER AND PAPERBOARD |
| ASTM D 4576 : 2001 : R2006 : EDT 1 | Standard Test Method for Mold Growth Resistance of Wet Blue |
| ASTM D 3273 : 2000 | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM D 4576 : 2016 : REDLINE | Standard Test Method for Mold Growth Resistance of Wet Blue and Wet White |
| ASTM D 4576 : 2016 | Standard Test Method for Mold Growth Resistance of Wet Blue and Wet White |
| ASTM D 7910 : 2014 : R2021 | Standard Practice for Collection of Fungal Material From Surfaces by Tape Lift |
| ASTM D 6974 : 2003 | Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels-Filtration and Culture Procedures |
| ASTM D 4576 : 2001 : R2006 | Standard Test Method for Mold Growth Resistance of Wet Blue |
| ASTM D 4576 : 2008 : R2013 | Standard Test Method for Mold Growth Resistance of Wet Blue |
| ASTM D 6974 : 2020 | Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures |
| ASTM D 6469 : 2017 | Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
| ASTM E 2722 : 2009 | Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity in Fabric and Air Filter Media |
| ASTM D 4300 : 2001 : R2021 : EDT 1 | Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi |
| ASTM D 6469 : 2011 | Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
| AATCC TM 174 : 2011(R2016)e | ANTIMICROBIAL ACTIVITY ASSESSMENT OF NEW CARPETS |
| ASTM D 4300 : 2001 : R2008 | Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi |
| ASTM D 6469 : 1999 | Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
| ASTM D 4783 : 2001 : R2013 | Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi |
| ASTM D 6329 : 1998 : R2023 | Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers |
| ASTM D 4783 : 2001 : R2021 | Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi |
| ASTM D 6329 : 1998 : R2015 | Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers |
| BS EN 113:1997 | Wood preservatives. Test method for determining the protective effectiveness against wood destroying basidiomycetes. Determination of the toxic values |
| ASTM E 2197 : 2017 : EDT 1 | Standard Quantitative Disk Carrier Test Method for Determining Bactericidal, Virucidal, Fungicidal, Mycobactericidal, and Sporicidal Activities of Chemicals |
| ASTM E 2722 : 2014 : REDLINE | Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity in Fabric and Air Filter Media |
| ASTM D 7436 : 2011 | Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology |
| ASTM D 6974 : 2016 : REDLINE | Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures |
| ASTM D 3456 : 1986 : R2012 | Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack |
| ASTM D 2020 : 1992 : R1999 | Standard Test Methods for Mildew (Fungus) Resistance of Paper and Paperboard |
| ASTM D 5590 : 2000 | Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay |
| ASTM G 21 : 2015 | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
| ASTM D 6469 : 2008 : EDT 1 | Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
| ASTM E 2111 : 2005 | Standard Quantitative Carrier Test Method to Evaluate the Bactericidal, Fungicidal, Mycobactericidal, and Sporicidal Potencies of Liquid Chemical Microbicides |
| ASTM F 1094 : 1987 : R2012 | Standard Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method |
| ASTM D 6974 : 2004 | Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures |
| ASTM D 4445 : 2010 | Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method) |
| ASTM D 3273 : 2016 | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM D 6469 : 2017 : REDLINE | Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
| ASTM D 5590 : 2000 : R2010 | Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay |
| ASTM G 21 : 2015 : R2021 : EDT 1 | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
| ASTM E 2197 : 2011 | Standard Quantitative Disk Carrier Test Method for Determining the Bactericidal, Virucidal, Fungicidal, Mycobactericidal and Sporicidal Activities of Liquid Chemical Germicides |
| ASTM D 3273 : 2016 : REDLINE | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM D 5590 : 2017 | Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay |
| ASTM D 4783 : 2001 : R2008 | Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi |
| ASTM D 6329 : 1998 | Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers |
| ASTM D 4445 : 2010 : R2019 | Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method) |
| ASTM E 2111 : 2012 : R2018 | Standard Quantitative Carrier Test Method to Evaluate the Bactericidal, Fungicidal, Mycobactericidal, and Sporicidal Potencies of Liquid Chemicals |
| BS 3900-G6:1989 | Methods of test for paints Assessment of resistance to fungal growth |
| ASTM D 5259 : 2019 | Standard Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure |
| ASTM E 1326 : 2013 | Standard Guide for Evaluating Nonconventional Microbiological Tests Used for Enumerating Bacteria |
| ASTM D 5590 : 2000 : R2005 | Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.