ASTM E 50 : 2017
Current
The latest, up-to-date edition.
Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
Hardcopy , PDF
English
09-01-2017
These practices cover laboratory apparatus and reagents that are required for the chemical analysis of metals, ores and related materials by standard methods of ASTM.
1.1These practices cover laboratory apparatus and reagents that are required for the chemical analysis of metals, ores and related materials by standard methods of ASTM. Detailed descriptions of recommended apparatus and detailed instructions for the preparation of standard solutions and certain nonstandardized reagents will be found listed or specified in the individual methods of analysis. Included here are general recommendations on the purity of reagents and protective measures for the use of hazardous reagents.
1.2These recommendations are intended to apply to the ASTM methods of chemical analysis of metals when definite reference is made to these practices, as covered in Section 4.
1.3The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazards are given in Section 8.
Note 1:The use of the verb “shall” (with its obligatory third person meaning) in this standard has been confined to those aspects of laboratory safety where regulatory requirements are known to exist. Such regulations, however, are beyond the scope of these practices.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Committee |
E 01
|
DocumentType |
Standard Practice
|
Pages |
12
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
ASTM E 1044 : 1996 : R2006 | Standard Specification for Glass Serological Pipets (General Purpose and Kahn) |
ASTM E 100 : 1995 : R2001 | Standard Specification for ASTM Hydrometers |
ASTM E 1621 : 2013 | Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
ASTM E 135 : 2023 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM D 1193 : 1977 : R1983 : EDT 1 | Standard Specification for Reagent Water |
ASTM E 135 : 2021 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 1621 : 2005 | Standard Guide for X-Ray Emission Spectrometric Analysis |
ASTM E 542 : 2001 : R2021 | Standard Practice for Calibration of Laboratory Volumetric Apparatus |
ASTM E 135 : 2003 : REV B | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 77 : 2014 : EDT 1 | Standard Test Method for Inspection and Verification of Thermometers |
ASTM D 1193 : 2006 : R2011 | Standard Specification for Reagent Water |
ASTM E 1621 : 2022 | Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
ASTM E 288 : 1994 : R1998 | Standard Specification for Laboratory Glass Volumetric Flasks |
ASTM E 135 : 2023 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 1044 : 1996 : R2001 | Standard Specification for Glass Serological Pipets (General Purpose and Kahn) |
ASTM E 1044 : 1996 : R2011 | Standard Specification for Glass Serological Pipets (General Purpose and Kahn) |
ASTM E 438 : 1992 : R2018 | Standard Specification for Glasses in Laboratory Apparatus |
ASTM E 1044 : 1996 : R2018 | Standard Specification for Glass Serological Pipets (General Purpose and Kahn) |
ASTM E 1621 : 2021 | Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
ASTM D 1193 : 1991 | Standard Specification for Reagent Water |
ASTM E 135 : 2002 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 135 : 2022 : REV B | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 438 : 1992 : R2024 | Standard Specification for Glasses in Laboratory Apparatus |
ASTM E 1044 : 1996 : R2024 | Standard Specification for Glass Serological Pipets (General Purpose and Kahn) |
ASTM E 135 : 2022 : REV A | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 694 : 2018 : R2024 | Standard Specification for Laboratory Glass Volumetric Apparatus |
ASTM E 542 : 2001 : R2012 | Standard Practice for Calibration of Laboratory Volumetric Apparatus |
ASTM E 1 : 2014 : R2020 | Standard Specification for ASTM Liquid-in-Glass Thermometers |
ASTM E 135 : 2021 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 135 : 2003 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 135 : 2003 : REV C | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 694 : 2018 | Standard Specification for Laboratory Glass Volumetric Apparatus |
ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
ASTM D 1193 : 2006 | Standard Specification for Reagent Water |
ASTM E 135 : 2022 | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM D 1193 : 1999 | Standard Specification for Reagent Water |
ASTM E 1044 : 1996 | Standard Specification for Glass Serological Pipets (General Purpose and Kahn) |
ASTM E 1621 : 1994 : R1999 | Standard Guide for X-Ray Emission Spectrometric Analysis |
ASTM E 135 : 2020 : REV B | Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
ASTM E 77 : 1998 | Standard Test Method for Inspection and Verification of Thermometers |
ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
ASTM E 77 : 2014 : R2021 | Standard Test Method for Inspection and Verification of Thermometers |
ASTM E 542 : 2022 | Standard Practice for Gravimetric Calibration of Laboratory Volumetric Instruments |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.