ASTM E 659 : 2015 : REDLINE
Current
The latest, up-to-date edition.
Standard Test Method for Autoignition Temperature of Chemicals
English
09-25-2015
CONTAINED IN VOL. 14.02, 2015 Specifies the determination of hot- and cool-flame autoignition temperatures of a liquid chemical in air at atmospheric pressure in a uniformly heated vessel.
1.1This test method covers the determination of hot- and cool-flame autoignition temperatures of a liquid chemical in air at atmospheric pressure in a uniformly heated vessel.
Note 1:Within certain limitations, this test method can also be used to determine the autoignition temperature of solid chemicals which readily melt and vaporize at temperatures below the test temperature and for chemicals that are gaseous at atmospheric pressure and temperature.
Note 2:After a round robin study, Test Method D2155 was discontinued, and replaced by Test Method E659 in 1978. See also Appendix X2.
1.2This standard should be used to measure and describe the properties of materials, products, or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products, or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire risk assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use.
| Committee |
E 27
|
| DocumentType |
Redline
|
| Pages |
7
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| MIL-PRF-83282 Revision D:1997 | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 |
| NFPA 497M : 1991 | CLASSIFICATION OF GASES, VAPORS AND DUSTS FOR ELECTRICAL EQUIPMENT IN HAZARDOUS (CLASSIFIED) LOCATIONS |
| SAE MS 1003-2 : 2004 | Lubricants, Industrial Oils, and Related Products Type D Compressor Oils - Specification - Addendum(Cancelled Jan 2013) |
| ASTM C 647 : 2008 | Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation |
| NFPA 496 : 2017 | PURGED AND PRESSURIZED ENCLOSURES FOR ELECTRICAL EQUIPMENT |
| IEC 60335-2-40:2018 RLV | Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers |
| SAE ARP 6385 : 2017 | AIRCRAFT FUEL PUMP MECHANICAL AND ELECTRICAL SAFETY DESIGN |
| ISA TR12.24.01 : 1998 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS CLASSIFIED AS CLASS 1, ZONE 0, ZONE 1, OR ZONE 2 |
| API 2216 : 2003 : R2015 | IGNITION RISK OF HYDROCARBON LIQUIDS AND VAPORS BY HOT SURFACES IN THE OPEN AIR |
| MIL-HDBK-510 Revision A:2014 | AEROSPACE FUELS CERTIFICATION |
| MIL H 46170 : B | HYDRAULIC FLUID, RUST INHIBITED, FIRE-RESISTANT, SYNTHETIC HYDROCARBON BASE |
| NFPA 497 : 2017 | CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
| ASTM D 2878 : 2010 | Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils |
| UNE 206015:2018 | Heat transfer fluids for solar thermal power plants with parabolic trough collector technology. Requirements and tests |
| NFPA 49 : 1994 | HAZARDOUS CHEMICALS DATA |
| IEC 60335-2-40 REDLINE : 6.0 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS |
| SAE MS 1005 : 2017 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS TYPE HF FIRE-RESISTANT HYDRAULIC FLUIDS - SPECIFICATION |
| ASTM E 1445 : 2008 | Standard Terminology Relating to Hazard Potential of Chemicals |
| ASTM D 2878 : 2010 : R2016 | Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils |
| SAE ARP594 : 2017 | FUEL PUMP THERMAL SAFETY DESIGN |
| 12/30234431 DC : 0 | BS ISO 9940 - AEROSPACE - FIRE RESISTANT HYDRAULIC FLUIDS |
| ASTM D 5372 : 2017 : REDLINE | Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids |
| MIL-HDBK-510-1 Revision A:2010 | AEROSPACE FUELS CERTIFICATION |
| MIL H 83282 : C | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, AIRCRAFT, METRIC, NATO CODE NUMBER H 537 |
| MIL-PRF-87100 Revision A:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, POLYPHENYL ETHER BASE |
| IEC 60335-2-40:2018 | Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers |
| ASTM D 2883 : 1995 : R2009 | Standard Test Method for Reaction Threshold Temperature of Liquid and Solid Materials (Withdrawn 2016) |
| ASTM D 2883 : 1995 | Standard Test Method for Reaction Threshold Temperature of Liquid and Solid Materials |
| ASTM D 7863 : 2017 : REDLINE | Standard Guide for Evaluation of Convective Heat Transfer Coefficient of Liquids |
| ISA RP12.24.01 : 1998 | RECOMMENDED PRACTICE FOR CLASSIFICATIONS OF LOCATIONS FOR ELECTRICAL INSTALLATIONS CLASSIFIED AS CLASS I ZONE 0, ZONE 1, OR ZONE 2 |
| NFPA 53 : 2016 | MATERIALS, EQUIPMENT, AND SYSTEMS USED IN OXYGEN-ENRICHED ATMOSPHERES |
| SAE AIR 81 : 2016 | IMPORTANCE OF PHYSICAL AND CHEMICAL PROPERTIES OF AIRCRAFT HYDRAULIC FLUIDS |
| NFPA 921 : 2017 | GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS |
| ASTM D 2883 : 1995 : R2000 : EDT 1 | Standard Test Method for Reaction Threshold Temperature of Liquid and Solid Materials |
| ASTM C 1696 : 2016 : REDLINE | Standard Guide for Industrial Thermal Insulation Systems |
| ASTM E 1445 : 2008 : R2015 | Standard Terminology Relating to Hazard Potential of Chemicals |
| ASTM D 6813 : 2002 : REV A : R2007 | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
| ASTM D 6813 : 2002 | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
| ASTM D 6813 : 2002 : REV A : R2013 | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps (Withdrawn 2015) |
| ASTM D 6813 : 2002 : REV A | Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps |
| ASTM D 7665 : 2017 : REDLINE | Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids |
| NFPA 325M : 1991 | FIRE HAZARD PROPERTIES OF FLAMMABLE LIQUIDS, GASES, AND VOLATILE SOLIDS |
| ASTM E 1491 : 2006 : R2012 | Standard Test Method for Minimum Autoignition Temperature of Dust Clouds |
| MIL-PRF-46170 Revision E:2013 | HYDRAULIC FLUID, RUST INHIBITED, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, NATO CODE NO. H-544 |
| ASTM E 1491 : 2006 : R2019 | Standard Test Method for Minimum Autoignition Temperature of Dust Clouds |
| SAE MS 1000 : 2013 | LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS - CLASSIFICATION |
| ASTM C 647 : 2008 : R2013 | Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation |
| ASTM E 1491 : 2006 | Standard Test Method for Minimum Autoignition Temperature of Dust Clouds |
| API RP 2216 : 2003 | IGNITION RISK OF HYDROCARBON LIQUIDS AND VAPORS BY HOT SURFACES IN THE OPEN AIR |
| IEEE 1349-2011 REDLINE | IEEE Guide for Application of Electric Motors in Class I, Division 2 and Class I, Zone 2 Hazardous (Classified) Locations |
| ASTM D 2883 : 1995 : R2005 | Standard Test Method for Reaction Threshold Temperature of Liquid and Solid Materials |
| ASTM D 2155 : 2012 | Standard Test Method for Determination of Fire Resistance of Aircraft Hydraulic Fluids by Autoignition Temperature |
| ASTM D 2883 : 1995 | Standard Test Method for Reaction Threshold Temperature of Liquid and Solid Materials |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.