ASTM F 2007 : 2018
Current
The latest, up-to-date edition.
Standard Practice for Design, Manufacture, and Operation of Concession Go-Karts and Facilities
Hardcopy , PDF
English
11-01-2018
This practice applies to the design, manufacture, and operation of concession go-karts and their associated operating facilities where public or member use is offered with a use fee.
1.1This practice applies to the design, manufacture, and operation of concession go-karts and their associated operating facilities where public or member use is offered with a use fee. This practice defines classifications for the various vehicles offered for public use to replicate motor sports competitive activities.
1.2This standard does not apply to vehicles or facilities specifically offered for racing (race karts) or used for general purpose by private owners (fun karts) other than owners of concession go-kart facilities.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Committee |
F 24
|
| DocumentType |
Standard Practice
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
| ASTM F 2642 : 2008 : R2015 | Standard Consumer Safety Specification for Safety Instructions and Labeling for Recreational Powered Scooters and Pocket Bikes (Withdrawn 2023) |
| ASTM F 2641 : 2008 : R2015 | Standard Consumer Safety Specification for Recreational Powered Scooters and Pocket Bikes |
| ASTM F 2783 : 2017 | Standard Practice for Design, Manufacture, Operation, Maintenance, and Inspection of Amusement Rides and Devices, in Canada |
| ASTM F 2291 : 2011 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 1193 : 2003 | Standard Practice for An Amusement Ride and Device Manufacturer Quality Assurance Program |
| ASTM F 2291 : 2023 : REV B | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 1193 : 2016 | Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices |
| ASTM F 770 : 2019 | Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices |
| ASTM F 770 : 2021 : REV A | Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices |
| ASTM F 770 : 2021 | Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices |
| ASTM F 1159 : 1997 : REV A | Standard Practice for the Design and Manufacture of Amusement Rides and Devices |
| ASTM F 2291 : 2009 : REV B | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 2291 : 2004 : REV A | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 2291 : 2022 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 2291 : 2005 : REV A | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 1159 : 2015 | Standard Practice for Design of Amusement Rides and Devices that are Outside the Purview of Other F24 Design Standards |
| ASTM F 2291 : 2004 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 2291 : 2016 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 1159 : 2003 : REV A | Standard Practice for Design and Manufacture of Patron Directed, Artificial Climbing Walls, Dry Slide, Coin Operated and Purposeful Water Immersion Amusement Rides and Devices and Air-Supported Structures |
| ASTM F 1193 : 2014 | Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices |
| ASTM F 1193 : 2006 | Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices |
| ASTM F 2291 : 2014 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 2291 : 2017 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 2291 : 2018 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 1193 : 2018 : REV A | Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices |
| ASTM F 2291 : 2023 : REV A | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 2291 : 2015 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 1193 : 2004 : REV B | Standard Practice for Amusement Ride and Device Manufacturer Quality Assurance Program and Manufacturing Requirements |
| ASTM F 1159 : 2002 | Standard Practice for the Design and Manufacture of Amusement Rides and Devices |
| ASTM F 2291 : 2003 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 2291 : 2008 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 1193 : 2022 | Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices |
| ASTM F 1193 : 2003 : REV A | Standard Practice for Amusement Ride and Device Manufacturer Quality Assurance Program and Manufacturing Requirements |
| ASTM F 2291 : 2013 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 1193 : 2005 | Standard Practice for Amusement Ride and Device Manufacturer Quality Assurance Program and Manufacturing Requirements |
| ASTM F 2291 : 2022 : REV A | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 1159 : 2011 | Standard Practice for Design and Manufacture of Patron Directed, Artificial Climbing Walls, Dry Slide, Coin Operated and Purposeful Water Immersion Amusement Rides and Devices and Air-Supported Structures |
| ASTM F 2291 : 2009 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 1193 : 2004 | Standard Practice for Amusement Ride and Device Manufacturer Quality Assurance Program and Manufacturing Requirements |
| ASTM F 2291 : 2006 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 1159 : 2016 | Standard Practice for Design of Amusement Rides and Devices that are Outside the Purview of Other F24 Design Standards |
| ASTM F 1193 : 2015 | Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices |
| ASTM F 1193 : 2023 | Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices |
| ASTM F 1193 : 1997 | Standard Practice for An Amusement Ride and Device Manufacturer Quality Assurance Program |
| ASTM F 1193 : 2004 : REV A | Standard Practice for Amusement Ride and Device Manufacturer Quality Assurance Program and Manufacturing Requirements |
| ASTM F 770 : 2022 | Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices |
| ASTM F 2291 : 2005 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 2291 : 2009 : REV A | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 770 : 2023 | Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices |
| ASTM F 1159 : 2003 | Standard Practice for the Design and Manufacture of Amusement Rides and Devices |
| ASTM F 1159 : 2014 | Standard Practice for Design of Amusement Rides and Devices that are Outside the Purview of Other F24 Design Standards |
| ASTM F 1159 : 2016 : EDT 1 | Standard Practice for Design of Amusement Rides and Devices that are Outside the Purview of Other F24 Design Standards |
| ASTM F 1193 : 2018 | Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices |
| ASTM F 2291 : 2019 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 1159 : 2015 : REV A | Standard Practice for Design of Amusement Rides and Devices that are Outside the Purview of Other F24 Design Standards |
| ASTM F 1159 : 2015 : REV B | Standard Practice for Design of Amusement Rides and Devices that are Outside the Purview of Other F24 Design Standards |
| ASTM F 2291 : 2023 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 1193 : 2017 | Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices |
| ASTM F 2291 : 2019 : EDT 1 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 2291 : 2003 : REV A | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 2291 : 2020 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 2291 : 2021 | Standard Practice for Design of Amusement Rides and Devices |
| ASTM F 2291 : 2006 : REV A | Standard Practice for Design of Amusement Rides and Devices |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.