• There are no items in your cart

ASTM F 2213 : 2017 : REDLINE

Current
Current

The latest, up-to-date edition.

Standard Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment
Available format(s)

PDF

Language(s)

English

Published date

09-01-2017

CONTAINED IN VOL. 13.01, 2017 Defines the measurement of the magnetically induced torque produced by the static magnetic field in the magnetic resonance environment on medical devices and the comparison of that torque a user-specified acceptance criterion.

1.1This test method covers the measurement of the magnetically induced torque produced by the static magnetic field in the magnetic resonance environment on medical devices and the comparison of that torque a user-specified acceptance criterion.

1.2This test method does not address other possible safety issues which may include, but are not limited to, magnetically induced deflection force, tissue heating, device malfunction, imaging artifacts, acoustic noise, interaction among devices, and the functionality of the device and the MR system.

1.3The torque considered here is the magneto-static torque due to the interaction of the MRI static magnetic field with the magnetization of the implant. The dynamic torque due to interaction of the static field with eddy currents induced in a rotating device is not addressed in this test method. Torque induced by currents in lead wires is not addressed by this standard.

1.4The methods in this standard are applicable for MR systems with a horizontal magnetic field. Not all of the methods described in this standard are applicable for use in an MR system with a vertical magnetic field. The Suspension Method and the Low Friction Surface Method require gravity to be orthogonal to the magnetically induced torsion and may not be performed using a vertical magnetic field. The Torsional Spring and Pulley Methods can be adapted to work in a vertical magnetic field, however the example apparatus are not appropriate for use in a vertical magnetic field. The Calculation Based on Measured Displacement Force Method is independent of the MR system and thus could be used for an MR system with a vertical magnetic field.

1.5The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
F 04
DocumentType
Redline
Pages
17
PublisherName
American Society for Testing and Materials
Status
Current

DIN EN ISO 12417-1 E : 2016 CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - VASCULAR DEVICE-DRUG COMBINATION PRODUCTS - PART 1: GENERAL REQUIREMENTS (ISO 12417-1:2015)
ISO 20697:2018 Sterile drainage catheters and accessory devices for single use
13/30261812 DC : 0 BS ISO 10555-6 - INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 6: SUBCUTANEOUS IMPLANTED PORTS
14/30270462 DC : 0 BS EN ISO 5840-1 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 1: GENERAL REQUIREMENTS
BS EN ISO 5840-2:2015 Cardiovascular implants. Cardiac valve prostheses Surgically implanted heart valve substitutes
ANSI/AAMI CI86:2017 COCHLEAR IMPLANT SYSTEMS: REQUIREMENTS FOR SAFETY, FUNCTIONAL VERIFICATION, LABELING AND RELIABILITY REPORTING
09/30177654 DC : 0 BS EN 62570 - MAGNETIC RESONANCE EQUIPMENT FOR MEDICAL IMAGING - INSTRUCTIONS FOR MARKING ITEMS WITHIN THE CONTROLLED ACCESS AREA
DIN EN ISO 12417-1:2016-02 CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - VASCULAR DEVICE-DRUG COMBINATION PRODUCTS - PART 1: GENERAL REQUIREMENTS (ISO 12417-1:2015)
UNE-EN ISO 25539-3:2012 Cardiovascular implants - Endovascular devices - Part 3: Vena cava filters (ISO 25539-3:2011)
17/30336577 DC : 0 BS EN ISO 20697 - STERILE DRAINAGE CATHETERS AND ACCESSORY DEVICES FOR SINGLE USE
17/30336573 DC : 0 BS EN ISO 20696 - STERILE URETHAL CATHETERS FOR SINGLE USE
I.S. EN ISO 10555-6:2017 INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 6: SUBCUTANEOUS IMPLANTED PORTS (ISO 10555-6:2015)
DIN EN ISO 5840-3:2013-06 Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques (ISO 5840-3:2013)
ANSI/AAMI/ISO 25539-1:2017 CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 1: ENDOVASCULAR PROSTHESES
ISO/TR 12417-2:2017 Cardiovascular implants and extracorporeal systems — Vascular device-drug combination products — Part 2: Local regulatory information
ANSI/AAMI/ISO 5840-3:2013 CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY TRANSCATHETER TECHNIQUES
ISO/TS 17137:2014 Cardiovascular implants and extracorporeal systems Cardiovascular absorbable implants
AAMI ISO TIR 10974 : 2012 ASSESSMENT OF THE SAFETY OF MAGNETIC RESONANCE IMAGING FOR PATIENTS WITH AN ACTIVE IMPLANTABLE MEDICAL DEVICE
DIN EN ISO 10555-6:2017-11 INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 6: SUBCUTANEOUS IMPLANTED PORTS (ISO 10555-6:2015)
ISO/TS 12417:2011 Cardiovascular implants and extracorporeal systems Vascular device-drug combination products
PD ISO/TS 17137:2014 Cardiovascular implants and extracorporeal systems. Cardiovascular absorbable implants
ISO 25539-3:2011 Cardiovascular implants Endovascular devices Part 3: Vena cava filters
BS EN ISO 14630:2012 Non-active surgical implants. General requirements
EN ISO 25539-3:2011 Cardiovascular implants - Endovascular devices - Part 3: Vena cava filters (ISO 25539-3:2011)
EN 62570:2015 Standard practice for marking medical devices and other items for safety in the magnetic resonance environment
UNE-EN ISO 25539-2:2013 Cardiovascular implants - Endovascular devices - Part 2: Vascular stents (ISO 25539-2:2012)
17/30345938 DC : 0 BS ISO 20698 - CATHETER SYSTEMS FOR NEURAXIAL APPLICATION - STERILE AND SINGLE-USE CATHETERS AND ACCESSORIES
11/30243761 DC : 0 BS ISO 14708-7 - IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 7: PARTICULAR REQUIREMENTS FOR COCHLEAR IMPLANT SYSTEMS
14/30251609 DC : 0 BS EN ISO 12417-1 - CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - VASCULAR DEVICE-DRUG COMBINATION PRODUCTS - PART 1: GENERAL REQUIREMENTS
ISO 20696:2018 Sterile urethral catheters for single use
I.S. EN ISO 5840-3:2013 CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY TRANSCATHETER TECHNIQUES (ISO 5840-3:2013)
14/30281560 DC : 0 BS EN ISO 5840-2 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 2: SURGICALLY IMPLANTED HEART VALVE SUBSTITUTES
DIN EN ISO 25539-3:2012-03 Cardiovascular implants - Endovascular devices - Part 3: Vena cava filters (ISO 25539-3:2011)
BS EN 45502-2-3:2010 Active implantable medical devices Particular requirements for cochlear and auditory brainstem implant systems
UNI EN ISO 5840-3 : 2013 CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY TRANSCATHETER TECHNIQUES
AAMI ISO TIR 17137 : 2014 CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - CARDIOVASCULAR ABSORBABLE IMPLANTS
I.S. EN ISO 5840-1:2015 CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 1: GENERAL REQUIREMENTS (ISO 5840-1:2015)
ISO 14708-7:2013 Implants for surgery Active implantable medical devices Part 7: Particular requirements for cochlear implant systems
DIN EN ISO 5840-2 E : 2016 CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 2: SURGICALLY IMPLANTED HEART VALVE SUBSTITUTES (ISO 5840-2:2015)
EN ISO 5840-2:2015 Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2015)
EN ISO 5840-1:2015 Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements (ISO 5840-1:2015)
EN ISO 5840-3:2013 Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques (ISO 5840-3:2013)
I.S. EN ISO 14630:2012 NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS (ISO 14630:2012)
UNE-EN ISO 5840-2:2016 Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2015)
DIN EN ISO 10555-6 E : 2017 INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 6: SUBCUTANEOUS IMPLANTED PORTS (ISO 10555-6:2015)
BS ISO 18190:2016 Anaesthetic and respiratory equipment. General requirements for airways and related equipment
BS EN ISO 12417-1:2015 Cardiovascular implants and extracorporeal systems. Vascular device-drug combination products General requirements
BS EN 62570:2015 Standard practice for marking medical devices and other items for safety in the magnetic resonance environment
BS EN ISO 5840-1:2015 Cardiovascular implants. Cardiac valve prostheses General requirements
ASTM F 2052 : 2015 : REDLINE Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment
ANSI/AAMI/ISO 25539-2:2012 CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 2: VASCULAR STENTS
BS EN ISO 5840-3:2013 Cardiovascular implants. Cardiac valve prostheses Heart valve substitutes implanted by transcatheter techniques
UNE-EN ISO 5840-1:2016 Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements (ISO 5840-1:2015)
DIN EN ISO 5840-2:2016-05 Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2015)
DIN EN ISO 5840-1:2015-12 Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements (ISO 5840-1:2015)
AAMI ISO 25539-3 : 2011 CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 3: VENA CAVA FILTERS
I.S. EN ISO 5840-2:2015 CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 2: SURGICALLY IMPLANTED HEART VALVE SUBSTITUTES (ISO 5840-2:2015)
I.S. EN ISO 25539-2:2012 CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 2: VASCULAR STENTS (ISO 25539-2:2012)
AAMI ISO 5840-1 : 2016 CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 1: GENERAL REQUIREMENTS
I.S. EN ISO 25539-3:2011 CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 3: VENA CAVA FILTERS (ISO 25539-3:2011)
ASTM F 2119 : 2007 Standard Test Method for Evaluation of MR Image Artifacts from Passive Implants
UNI EN ISO 25539-3 : 2012 CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 3: VENA CAVA FILTERS
BS EN ISO 10555-6:2017 Intravascular catheters. Sterile and single-use catheters Subcutaneous implanted ports
ASTM F 2119 : 2007 : R2013 Standard Test Method for Evaluation of MR Image Artifacts from Passive Implants (Withdrawn 2022)
ASTM F 2503 : 2013 : REDLINE Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment
ISO 10555-6:2015 Intravascular catheters Sterile and single-use catheters Part 6: Subcutaneous implanted ports
EN ISO 25539-2:2012 Cardiovascular implants - Endovascular devices - Part 2: Vascular stents (ISO 25539-2:2012)
UNI CEI EN 45502-2-3 : 2010 ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-3: PARTICULAR REQUIREMENTS FOR COCHLEAR AND AUDITORY BRAINSTEM IMPLANT SYSTEMS
UNI EN ISO 14630 : 2013 NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS
10/30196945 DC : 0 BS ISO 25539-3 - CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 3: VENA CAVA FILTERS
BS EN ISO 25539-1:2017 Cardiovascular implants. Endovascular devices Endovascular prostheses
BS EN ISO 25539-3:2011 Cardiovascular implants. Endovascular devices Vena cava filters
11/30219211 DC : 0 BS EN ISO 5840-3 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY MINIMALLY INVASIVE TECHNIQUES
UNE-EN ISO 12417-1:2016 Cardiovascular implants and extracorporeal systems - Vascular device-drug combination products - Part 1: General requirements (ISO 12417-1:2015)
UNI EN ISO 25539-2 : 2013 CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 2: VASCULAR STENTS
DIN EN ISO 25539-2:2013-05 Cardiovascular implants - Endovascular devices - Part 2: Vascular stents (ISO 25539-2:2012)
AAMI ISO 12417-1 : 2015 CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - VASCULAR DEVICE-DRUG COMBINATION PRODUCTS - PART 1: GENERAL REQUIREMENTS
I.S. EN 62570:2015 STANDARD PRACTICE FOR MARKING MEDICAL DEVICES AND OTHER ITEMS FOR SAFETY IN THE MAGNETIC RESONANCE ENVIRONMENT
I.S. EN ISO 25539-1:2017 CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 1: ENDOVASCULAR PROSTHESES (ISO 25539-1:2017)
ASTM F 1831 : 2017 : REDLINE Standard Specification for Cranial Traction Tongs and Halo External Spinal Immobilization Devices
ASTM F 3160 : 2016 Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants
ISO/TS 10974:2012 Assessment of the safety of magnetic resonance imaging for patients with an active implantable medical device
DIN EN ISO 14630:2013-03 Non-active surgical implants - General requirements (ISO 14630:2012)
ISO 5840-3:2013 Cardiovascular implants Cardiac valve prostheses Part 3: Heart valve substitutes implanted by transcatheter techniques
ISO 25539-2:2012 Cardiovascular implants Endovascular devices Part 2: Vascular stents
IEC 62570:2014 Standard practice for marking medical devices and other items for safety in the magnetic resonance environment
ISO 5840-2:2015 Cardiovascular implants Cardiac valve prostheses Part 2: Surgically implanted heart valve substitutes
UNE-EN ISO 14630:2013 Non-active surgical implants - General requirements (ISO 14630:2012)
UNE-EN 45502-2-3:2010 Active implantable medical devices -- Part 2-3: Particular requirements for cochlear and auditory brainstem implant systems
ISO 12417-1:2015 Cardiovascular implants and extracorporeal systems — Vascular device-drug combination products — Part 1: General requirements
EN 45502-2-3:2010 Active implantable medical devices - Part 2-3: Particular requirements for cochlear and auditory brainstem implant systems
EN ISO 12417-1:2015 Cardiovascular implants and extracorporeal systems - Vascular device-drug combination products - Part 1: General requirements (ISO 12417-1:2015)
EN ISO 14630:2012 Non-active surgical implants - General requirements (ISO 14630:2012)
AAMI ISO TIR 12417 : 2011 CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - VASCULAR DEVICE-DRUG COMBINATION PRODUCTS
DIN EN ISO 5840-1 E : 2015 CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 1: GENERAL REQUIREMENTS (ISO 58401:2015)
BS ISO 10555-6 : 2015 INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 6: SUBCUTANEOUS IMPLANTED PORTS
DD ISO/TS 12417:2011 Cardiovascular implants and extracorporeal systems. Vascular device-drug combination products
UNE-EN ISO 5840-3:2013 Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques (ISO 5840-3:2013)
DIN EN ISO 25539-1:2015-07 (Draft) CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 1: ENDOVASCULAR PROSTHESES (ISO 25539-1:2017)
BS EN ISO 25539-2:2012 Cardiovascular implants. Endovascular devices Vascular stents
PD ISO/TS 10974:2012 Assessment of the safety of magnetic resonance imaging for patients with an active implantable medical device
EN ISO 10555-6:2017 Intravascular catheters - Sterile and single-use catheters - Part 6: Subcutaneous implanted ports (ISO 10555-6:2015)
CEI EN 62570 : 2016 STANDARD PRACTICE FOR MARKING MEDICAL DEVICES AND OTHER ITEMS FOR SAFETY IN THE MAGNETIC RESONANCE ENVIRONMENT
I.S. EN 45502-2-3:2010 ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-3: PARTICULAR REQUIREMENTS FOR COCHLEAR AND AUDITORY BRAINSTEM IMPLANT SYSTEMS
ISO 18190:2016 Anaesthetic and respiratory equipment — General requirements for airways and related equipment
I.S. EN ISO 12417-1:2015 CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - VASCULAR DEVICE-DRUG COMBINATION PRODUCTS - PART 1: GENERAL REQUIREMENTS (ISO 12417-1:2015)
ISO 25539-1:2017 Cardiovascular implants — Endovascular devices — Part 1: Endovascular prostheses
ISO 5840-1:2015 Cardiovascular implants Cardiac valve prostheses Part 1: General requirements
ISO 14630:2012 Non-active surgical implants General requirements
DIN EN ISO 25539-1:2017-09 CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 1: ENDOVASCULAR PROSTHESES (ISO 25539-1:2017)

ASTM F 2503 : 2013 : REDLINE Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment
ISO 13485:2016 Medical devices Quality management systems Requirements for regulatory purposes
IEC 60601-2-33:2010+AMD1:2013+AMD2:2015 CSV Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis
ASTM F 2052 : 2015 : REDLINE Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment
ISO/TS 10974:2012 Assessment of the safety of magnetic resonance imaging for patients with an active implantable medical device

View more information
US$83.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.