Name: ASTM F 2660 : 2013
Brand: ASTM
Price: 75.00 USD

ASTM F 2660 : 2013

Superseded

Standard Test Method for Qualifying Coatings for Use on A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement

Available format(s)

Hardcopy , PDF

Superseded date

08-24-2020

Language(s)

English

Published date

11-01-2013

Publisher

American Society for Testing and Materials

1.1This test method defines the procedures and tests to evaluate the effect of a coating system on the susceptibility to environmental hydrogen embrittlement (EHE) of an ASTM A490 high strength structural bolt.

1.2This test method shall qualify a coating system for use with any size of A490 bolts (that is, ¹/₂to 1-¹/₂in.) high strength structural bolts, relative to EHE.

1.3The characteristic to be evaluated by this test method is the susceptibility to EHE caused by hydrogen generated from corrosion protection of the steel bolt by sacrificial galvanic corrosion of the coating. Testing shall be performed on coated, specimen ASTM A490 bolts manufactured to the maximum susceptible tensile strength values (see Table 1) of the bolt (see Section 5 Specimen Bolt Requirements). The internal hydrogen embrittlement (IHE) susceptibility will also be inherently evaluated when the EHE is tested through this test method. There is no need for a separate IHE susceptibility test.

1.4The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee	F 16
DocumentType	Test Method
Pages	7
PublisherName	American Society for Testing and Materials
Status	Superseded
SupersededBy	ASTM F 2660 : 2020
Supersedes	ASTM F 2660 : 2012

ASTM F 3111 : 2016	Standard Specification for Heavy Hex Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
ASTM F 3125/F3125M : 2018	Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
ASTM F 3043 : 2015	Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength

ASTM F 1789 : 2014 : REV A	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2016	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2017	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2008	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2006 : REV A	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2001 : REV A	Standard Terminology of F16 Mechanical Fasteners
ASTM F 1789 : 2017 : REV A	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2012 : REV A	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1624 : 2012 : R2018	Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique
ASTM F 1789 : 2001 : REV B	Standard Terminology of F16 Mechanical Fasteners
ASTM F 1789 : 2005 : REV C	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2003 : REV A	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2008 : REV B	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2006 : REV B	Standard Terminology for F16 Mechanical Fasteners
ASTM F 2078 : 2015	Standard Terminology Relating to Hydrogen Embrittlement Testing
ASTM F 1789 : 2014	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2002 : REV A	Standard Terminology of F16 Mechanical Fasteners
ASTM F 1789 : 2009 : REV A	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1624 : 2012	Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique
ASTM F 1789 : 2006 : REV C	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2004 : REV B	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2007 : REV C	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2007 : REV A	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2008 : REV C	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2015	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2002 : REV B	Standard Terminology of F16 Mechanical Fasteners
ASTM F 1789 : 2010 : REV A	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2012	Standard Terminology for F16 Mechanical Fasteners
ASTM F 2078 : 2001	Standard Terminology Relating to Hydrogen Embrittlement Testing
ASTM F 1624 : 2000	Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique
ASTM F 1789 : 2005 : REV D	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2010 : REV B	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2010 : REV A : EDT 1	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2015 : REV A	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1624 : 2006	Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique
ASTM F 1789 : 2000 : REV A	Standard Terminology of F16 Mechanical Fasteners
ASTM F 1789 : 2007 : REV B	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2011 : REV B	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2004 : REV A	Standard Terminology for F16 Mechanical Fasteners
ASTM F 2078 : 2008 : REV A	Standard Terminology Relating to Hydrogen Embrittlement Testing
ASTM F 1789 : 2005 : REV A	Standard Terminology for F16 Mechanical Fasteners
ASTM F 2078 : 2007	Standard Terminology Relating to Hydrogen Embrittlement Testing
ASTM F 1789 : 2008 : REV D	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2007	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2008 : REV A	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2011 : REV A	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2005 : REV B	Standard Terminology for F16 Mechanical Fasteners
ASTM F 1789 : 2002	Standard Terminology of F16 Mechanical Fasteners
ASTM F 1624 : 2009	Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique