ASTM F 3049 : 2014

Current

Current The latest, up-to-date edition.

Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

Publisher: American Society for Testing and Materials

Published: 06-01-2014

Available Formats: PDF - English, Hardcopy - English
More Info on product formats

Abstract - (Show below) - (Hide below)

CONTAINED IN VOL. 10.04, 2015 Defines the reader to techniques for metal powder characterization that may be useful for powder-based additive manufacturing processes including binder jetting, directed energy deposition, and powder bed fusion.

Scope - (Show below) - (Hide below)

1.1This guide introduces the reader to techniques for metal powder characterization that may be useful for powder-based additive manufacturing processes including binder jetting, directed energy deposition, and powder bed fusion. It refers the reader to other, existing standards that may be applicable for the characterization of virgin and used metal powders processed in additive manufacturing systems.2

1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Guide
Status	Current
Publisher	American Society for Testing and Materials
Pages
ISBN
Committee	F 42

Standards Referenced By This Book - (Show below) - (Hide below)

ASTM F 3213 : 2017	Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion
ASTM F 3302 : 2018	Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion
ASTM F 3184 : 2016	Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion
ASTM F 3318 : 2018	Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam
ASTM F 3303 : 2018	Standard for Additive Manufacturing – Process Characteristics and Performance: Practice for Metal Powder Bed Fusion Process to Meet Critical Applications

Standards Referencing This Book - (Show below) - (Hide below)

ASTM E 1447 : 2001	Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity Method
ASTM E 1941 : 2010 : R2016	Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis
ASTM E 2371 : 2013	Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)
ASTM E 1638 : 1994 : R2004	Standard Terminology Relating to Sieve Analysis
ASTM E 2465 : 2013 : REDLINE	Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ISO 3923-2 : 1981(R2017)	METALLIC POWDERS - DETERMINATION OF APPARENT DENSITY - SCOTT VOLUMETER METHOD
ASTM B 964 : 2016 : REDLINE	Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
ASTM E 1638 : 2007	Standard Terminology Relating to Sieves, Sieving Methods and Screening Media
ASTM E 1941 : 2010	Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis
ASTM E 1638 : 2010	Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media
ASTM F 2792 : 2010	Standard Terminology for Additive Manufacturing Technologies
ASTM F 2792 : 2012-03	TERMINOLOGY FOR ADDITIVE MANUFACTURING TECHNOLOGIES
ASTM E 572 : 2013 : REDLINE	Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM B 783 : 2013 : REDLINE	Standard Specification for Materials for Ferrous Powder Metallurgy (PM) Structural Parts
ASTM E 1447 : 1992 : R1996	Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity Method
ASTM E 2594 : 2020	Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based)
ASTM B 855 : 2017 : REDLINE	Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
ASTM E 1638 : 2018	Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media
ASTM E 2626 : 2008	GUIDE FOR SPECTROMETRIC ANALYSIS OF REACTIVE AND REFRACTORY METALS
ASTM B 212 : 2017 : REDLINE	Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
ASTM B 417 : 2013-11	TEST METHOD FOR APPARENT DENSITY OF NON-FREE-FLOWING METAL POWDERS USING THE CARNEY FUNNEL
ASTM F 2792 : 2009 : EDT 1	Standard Terminology for Additive Manufacturing Technologies
ASTM E 1447 : 2009	TEST METHOD FOR DETERMINATION OF HYDROGEN IN TITANIUM AND TITANIUM ALLOYS BY INERT GAS FUSION THERMAL CONDUCTIVITY/INFRARED DETECTION METHOD
ASTM E 539 : 2011-07	TEST METHOD FOR ANALYSIS OF TITANIUM ALLOYS BY X-RAY FLUORESCENCE SPECTROMETRY
ASTM E 2594 : 2009	TEST METHOD FOR ANALYSIS OF NICKEL ALLOYS BY INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY (PERFORMANCE-BASED METHOD)
ASTM B 213 : 2017 : REDLINE	Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
AS ISO/ASTM 52910:2020	Additive manufacturing - Design - Requirements, guidelines and recommendations
ASTM B 329 : 2015-02	TEST METHOD FOR APPARENT DENSITY OF METAL POWDERS AND COMPOUNDS USING THE SCOTT VOLUMETER
ASTM E 1569 : 2003	Standard Test Method for Determination of Oxygen in Tantalum Powder
ASTM E 2465 : 2011 : EDT 1	Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ISO 4497 : 1983(R2014)	METALLIC POWDERS - DETERMINATION OF PARTICLE SIZE BY DRY SIEVING
ASTM E 1638 : 2013	Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media
ASTM E 1447 : 2004	Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity Method
ISO 8302 : 1991(R2013)	THERMAL INSULATION - DETERMINATION OF STEADY-STATE THERMAL RESISTANCE AND RELATED PROPERTIES - GUARDED HOT PLATE APPARATUS
ASTM E 1638 : 2007 : REV A	Standard Terminology Relating to Sieves, Sieving Methods and Screening Media
ASTM B 214 : 2016 : REDLINE	Standard Test Method for Sieve Analysis of Metal Powders
ASTM E 1447 : 2009	Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method
ASTM E 2465 : 2006	Standard Test Method for Analysis of Ni-Base Alloys by X-ray Fluorescence Spectrometry
ASTM E 2626 :2008	Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals
ASTM B 923 : 2016 : REDLINE	Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
ASTM B 215 : 2015 : REDLINE	Standard Practices for Sampling Metal Powders
ASTM F 2792 : 2012	Standard Terminology for Additive Manufacturing Technologies^,
ASTM E 1569 : 2009	Standard Test Method for Determination of Oxygen in Tantalum Powder by Inert Gas Fusion Technique (Withdrawn 2018)
ASTM E 2792 : 2011	Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion
ASTM E 2594 : 2009	Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method)
ASTM E 1941 : 2004	Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys
ASTM E 1638 : 2012	Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media
ASTM F 2792 : 2010 : EDT 1	Standard Terminology for Additive Manufacturing Technologies
ASTM B 822 : 2017 : REDLINE	Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
ASTM F 2792 : 2012 : REV A	Standard Terminology for Additive Manufacturing Technologies^, (Withdrawn 2015)
ASTM E 1638 : 1994 : R1999	Standard Terminology Relating to Sieve Analysis
ASTM E 2465 : 2019	Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM E 2371 : 2004	Standard Test Method for Analysis of Titanium and Titanium Alloys by Atomic Emission Plasma Spectrometry (Withdrawn 2013)
ASTM B 703 : 2017	Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
ASTM E 1447 : 2009 : R2016	Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by Inert Gas Fusion Thermal Conductivity/Infrared Detection Method
ASTM E 2792 : 2013	Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion
ASTM E 2792 : 2013 : REDLINE	Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion
ASTM B 243 : 2016-08	TERMINOLOGY OF POWDER METALLURGY
ASTM B 527 : 2015 : REDLINE	Standard Test Method for Tap Density of Metal Powders and Compounds
ASTM E 2594 : 2009 : R2014	Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method)
ASTM E 1569 : 2009-02	TEST METHOD FOR DETERMINATION OF OXYGEN IN TANTALUM POWDER BY INERT GAS FUSION TECHNIQUE
ASTM E 2626 : 2008 : EDT 1	Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals (Withdrawn 2017)
ASTM E 1638 : 2013-08	TERMINOLOGY RELATING TO SIEVES, SIEVING METHODS, AND SCREENING MEDIA
ASTM F 2792 : 2009	Standard Terminology for Additive Manufacturing Technologies
ASTM E 1941 : 2010	TEST METHOD FOR DETERMINATION OF CARBON IN REFRACTORY AND REACTIVE METALS AND THEIR ALLOYS BY COMBUSTION ANALYSIS
ASTM E 1638 : 2011 : REV A	Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media
ISO 3923-1 : 2008	METALLIC POWDERS - DETERMINATION OF APPARENT DENSITY - PART 1: FUNNEL METHOD
ASTM E 1569 : 1993 : R1998	Standard Test Method for Determination of Oxygen in Tantalum Powder
ASTM E 1638 : 2009	Standard Terminology Relating to Sieves, Sieving Methods and Screening Media
ASTM E 1941 : 1998	Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys
ISO 13320-1 : 1999	PARTICLE SIZE ANALYSIS - LASER DIFFRACTION METHODS - PART 1: GENERAL PRINCIPLES
ASTM E 1447 : 2005	Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method
ASTM E 2465 : 2013	Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry

Add To Cart

Product Format

Quantity

add to cart

ASTM F 3049 : 2014

Abstract - (Show below) - (Hide below)

Scope - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

Standards Referenced By This Book - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?