• There are no items in your cart

ASTM F 331 : 2013 : REDLINE

Current
Current

The latest, up-to-date edition.

Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)
Available format(s)

PDF

Language(s)

English

Published date

06-01-2013

CONTAINED IN VOL. 15.03, 2014 Defines the determination of nonvolatile matter, that is, residue on evaporation, in solvent extract from aerospace components, using a rotary flash evaporator.

1.1This test method covers the determination of nonvolatile matter, that is, residue on evaporation, in solvent extract from aerospace components, using a rotary flash evaporator.

1.2The procedure for extraction from components is described in practices such as Practice F303. Before subjecting the extract to the following method, it should be processed to remove the insoluble particulate in accordance with Practice F311 (Note 1). Particle count analysis of the removed particulate may then be performed in accordance with Test Method F312. If particulate is not removed from the extract prior to performing this method, this should be noted on the test report.

Note 1Membrane filters with a maximum extractable content of 0.5 weight % should be used on samples to be processed by this test method. Conventional membranes contain 5 to 10 % extractables. For obtaining very low background levels, consideration should be given to using membranes without grid marks.

1.3The values stated in SI units are to be regarded as standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
E 21
DocumentType
Redline
Pages
3
PublisherName
American Society for Testing and Materials
Status
Current

MIL-STD-1330 Revision D:1996 STANDARD PRACTICE FOR PRECISION CLEANING AND TESTING OF SHIPBOARD OXYGEN, HELIUM, HELIUM-OXYGEN, NITROGEN AND HYDROGEN SYSTEMS
A-A-50427 Base Document:1996 CLEANING COMPOUND, SOLVENT, 1,1-DICHLORO-1-FLUOROETHANE, HCFC-141B, FOR OXYGEN SYSTEMS
MIL-STD-1246 Revision C:1994 PRODUCT CLEANLINESS LEVELS AND CONTAMINATION CONTROL PROGRAM
ASTM G 136 : 2003 : R2009 Standard Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction
ASTM G 144 : 2001 Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High-Temperature Combustion Analyzer
ASTM G 144 : 2001 : R2006 Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
ASTM G 136 : 2003 : R2016 Standard Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction
ASTM G 93 : 2003 : R2011 Standard Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments
ASTM G 131 : 1996 : R2008 Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques
ASTM G 121 : 1998 Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
ASTM G 120 : 2015 : REDLINE Standard Practice for Determination of Soluble Residual Contamination by Soxhlet Extraction
ASTM G 131 : 1996 : R2016 Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques
MIL-G-18997 Revision E:1991 GAUGE, PRESSURE, DIAL INDICATING
A-A-50425 Base Document:1996 CLEANING COMPOUND, HALOGENATED HYDROCARBON, FOR OXYGEN SYSTEM COMPONENTS, AEROSOL (SPOT CLEANER)
ASTM G 131 : 1996 : R2016 : EDT 1 Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques
NASA RPTSTD 8070 0001 : 2010 CHANGE 2 2013 SURFACE CLEANLINESS STANDARD OF FLUID SYSTEMS FOR ROCKET ENGINE TEST FACILITIES OF THE NASA ROCKET PROPULSION TEST PROGRAM
NASA KSC C 123 : 2009 SURFACE CLEANLINESS OF GROUND SUPPORT EQUIPMENT FLUID SYSTEMS, SPECIFICATION FOR
NASA MSFC SPEC 164 : 2010 CLEANLINESS OF COMPONENTS FOR USE IN OXYGEN, FUEL, AND PNEUMATIC SYSTEMS, SPECIFICATION FOR
NASA MSFC STD 246 : 2011 STANDARD DESIGN AND OPERATIONAL CRITERIA FOR CONTROLLED ENVIRONMENTAL AREAS
ASTM G 121 : 1998 : R2004 Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
ASTM G 131 : 1996 : R2002 Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques
ASTM G 121 : 1998 : R2010 : EDT 1 Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
ASTM G 144 : 2001 : R2014 Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
ASTM G 93 : 2003 : EDT 1 Standard Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments
ASTM G 136 : 2003 : R2016 : EDT 1 Standard Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction
ASTM G 121 : 1998 : R2015 : EDT 1 Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
A-A-59150 Revision A:1998 CLEANING COMPOUND, SOLVENT, HYDROFLUOROETHER (HFE)
ASTM G 131 : 1996 Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques
ASTM G 136 : 2003 Standard Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction

View more information
US$66.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.