• There are no items in your cart

ASTM F 477 : 2014 : REDLINE

Current
Current

The latest, up-to-date edition.

Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
Available format(s)

PDF

Language(s)

English

Published date

09-15-2014

CONTAINED IN VOL. 08.04, 2018 Specifies elastomeric seals (gaskets) used to seal the joints of plastic pipe used for gravity, low-pressure, and high-pressure applications.

1.1This specification covers elastomeric seals (gaskets) used to seal the joints of plastic pipe used for gravity, low-pressure, and high-pressure applications. This refers to push-on joints which require no internal or external pressure to effect the initial seal.

1.2Requirements are given for natural or synthetic rubber gaskets, or a combination of both.

1.3The text of this specification references notes, footnotes, and appendixes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification.

1.4The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.5The following precautionary caveat pertains only to the test method portion, Section 7, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
F 17
DocumentType
Redline
Pages
4
PublisherName
American Society for Testing and Materials
Status
Current

ASTM D 3139 : 1998 : R2011 Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
ASTM F 1987 : 2001 Standard Specification for Multilayer Pipe Type 2 , Compression Fittings, and Compression Joints for Hydronic Heating Systems
ASTM D 3517 : 2014 : REDLINE Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
ASTM D 3262 : 2016 : REDLINE Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
ASTM F 1901 : 2016 : REDLINE Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems
ASTM F 794:2003 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
ASTM F 794 : 2003 : R2014 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
ASTM D 3754 : 2014 : REDLINE Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
ASTM D 6783 : 2005 Standard Specification for Polymer Concrete Pipe
ASTM F 2881 : 2011 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
ASTM F 2946 : 2012 : R2017 Standard Specification for PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes
ASTM F 2881 : 2011 : R2015 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
ASTM D 3212 : 2007 : R2013 Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
ASTM F 892 : 1995 Specification for Polyethylene (PE) Corrugated Pipe With a Smooth Interior and Fittings (Withdrawn 2001)
ASTM F 2737 : 2011 : R2017 Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
ASTM F 2762 : 2011 : EDT 1 Standard Specification for 12 to 30 in. (300 to 750 mm) Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications (Withdrawn 2016)
ASTM F 2947 : 2012 Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
ASTM F 2763 : 2016 : REDLINE Standard Specification for 12 to 60 in. [300 to 1500 mm] Dual and Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
ASTM F 1759 : 1997 : R2004 Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
ASTM F 3058 : 2016 Standard Practice for Preliminary Field Testing of Thermoplastic Pipe Joints for Gravity Flow (Non-Pressure) Sewer Lines
ASTM D 2680 : 2001 : R2014 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
ASTM D 3139 : 1998 : R2005 Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
ASTM F 1986 : 2001 : R2011 Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems (Withdrawn 2020)
ICC 2009 INT. RESI.CODE & COMM.-I1 : 2009 2009 INTERNATIONAL RESIDENTIAL CODE & COMMENTARY - VOLUME 2: CHAPTERS 12 TO 44
AWWA M45 : 3 FIBERGLASS PIPE DESIGN
ASTM F 1759 : 1997 : R2010 Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
AWWA C908 : 2001 PVC SELF-TAPPING SADDLE TEES FOR USE ON PVC PIPE
ASTM F 679 : 2016 : REDLINE Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
FM 1614 : 2017 FIBER REINFORCED COMPOSITE (FRC) PIPE AND FITTINGS FOR UNDERGROUND FIRE PROTECTION SERVICE
AASHTO M 304 : 2011 : R2015 SPECIFICATION FOR POLY(VINYL CHLORIDE) (PVC) PROFILE WALL DRAIN PIPE AND FITTINGS BASED ON CONTROLLED INSIDE DIAMETER
ASTM F 1668 : 2016 : REDLINE Standard Guide for Construction Procedures for Buried Plastic Pipe
ASTM F 1336 : 2015 : REDLINE Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
ASTM D 3212 : 2007 Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
ASTM F 3219 : 2017 Standard Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single Wall Pipe and Fittings
ASTM D 2680 : 2001 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
ASTM F 2510/F2510M : 2017 : REDLINE Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Dual- and Triple-Wall Polyethylene and Polypropylene Pipes
ASTM F 2737 : 2011 Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
ASTM F 2762 : 2011 Standard Specification for 12 to 30 in. [300 to 750 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
ASTM F 949 : 2015 : REDLINE Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
ASTM F 2562/F2562M : 2015 : REDLINE Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage
AASHTO M 326 : 2008 SPECIFICATION FOR POLYETHYLENE (PE) LINER PIPE, 300- TO 1600-MM DIAMETER, BASED ON CONTROLLED OUTSIDE DIAMETER
AASHTO M 278 : 2015 SPECIFICATION FOR CLASS PS46 POLY(VINYL CHLORIDE) (PVC) PIPE
ASTM D 2751 : 2005 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings (Withdrawn 2014)
ICC 2012 INT. PVT. SEWAGE DISP.CODE : 2012 INTERNATIONAL PRIVATE SEWAGE DISPOSAL CODE
ASTM F 2768 : 2009 Standard Specification for Modified Stub ACME Thread Joint with Elastomeric Seal in Plastic Piping Components (Withdrawn 2016)
AWWA C900 : 2016 POLYVINYL CHLORIDE (PVC) PRESSURE PIPE AND FABRICATED FITTINGS, 4 IN. THROUGH 60 IN. (100 MM THROUGH 1,500 MM)
AASHTO MP 20 : 2013 SPECIFICATION FOR STEEL-REINFORCED POLYETHYLENE (PE) RIBBED PIPE, 300- TO 1500-MM (12- TO 60-IN.) DIAMETER
ASTM F 2947 : 2012 : EDT 1 Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
ASTM F 1483 : 2017 : REDLINE Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe
CSA B137 COMPENDIUM : 2017 THERMOPLASTIC PRESSURE PIPING COMPENDIUM
AWWA C905 : 2010 POLYVINYL CHLORIDE (PVC) PRESSURE PIPE AND FABRICATED FITTINGS, 14 IN. THROUGH 48 IN. (350 MM THROUGH 1,200 MM), FOR WATER TRANSMISSION AND DISTRIBUTION
ASTM F 1759 : 1997 : R2018 Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
ASTM F 2946 :2012 Standard Specification for PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes
ASTM F 1760 : 2016 : REDLINE Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
ASTM D 6783 : 2005 : REV A : R2017 Standard Specification for Polymer Concrete Pipe
ICC IPC CODE & COMMENTARY : 2015 IPC® Code and Commentary
ICC IRC CODE AND COMMENTARY VOLUME 2 : 2015 IRC® Code and Commentary, Volume 2
ICC 2012 INTERNATIONAL RESI. CODE : 2012 INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS
ICC 2012 INTERNATIONAL PLUMBING CODE : 2012 INTERNATIONAL PLUMBING CODE (INCLUDES IPSDC)
ANSI/AWWA C950:2013 FIBERGLASS PRESSURE PIPE
ASTM D 2680 : 2001 : R2009 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
ASTM D 3840 : 2014 : REDLINE SPECIFICATION FOR 'FIBERGLASS' (GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) PIPE FITTINGS FOR NONPRESSURE APPLICATIONS
DWA-M 143-20:2018 TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS
AASHTO PP 63 : 2009 : R2014 PRACTICE FOR PIPE JOINT SELECTION FOR HIGHWAY CULVERT AND STORM DRAINS
AASHTO MP 20 : 2013 : R2014 SPECIFICATION FOR STEEL-REINFORCED POLYETHYLENE (PE) RIBBED PIPE, 300- TO 1500-MM (12- TO 60-IN.) DIAMETER
AWWA C907 : 2017 INJECTION-MOLDED POLYVINYL CHLORIDE (PVC) PRESSURE FITTINGS, 4 IN. THROUGH 12 IN. (100 MM THROUGH 300 MM), FOR WATER, WASTEWATER, AND RECLAIMED WATER SERVICE
R 82 : 2017 PRACTICE FOR PIPE JOINT SELECTION FOR HIGHWAY CULVERT AND STORM DRAINS
ASTM F 2307 : 2003 Standard Specification for Series 10 Poly(Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter (Withdrawn 2011)
ASTM D3139 : 1998 Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
FM 1612 : 2016 POLYVINYL CHLORIDE (PVC) PIPE AND FITTING FOR UNDERGROUND FIRE PROTECTION SERVICE
ASTM F 1987 : 2001 : R2011 Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems (Withdrawn 2020)
GOST 849:2018 Primary nickel. SpecificationsE
AWWA M23 : 2 PVC PIPE - DESIGN AND INSTALLATION
ASTM F 1803 : 2015 Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
ASTM F 1866 : 2018 : REDLINE Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
ASTM F 1986 : 2001 : R2006 Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems
ICC IPSDC INTERNATIONAL PVT. SEWAGE DISPOSAL CODE : 2015 INTERNATIONAL PRIVATE SEWAGE DISPOSAL CODE
AASHTO M 304 : 2011 SPECIFICATION FOR POLY(VINYL CHLORIDE) (PVC) PROFILE WALL DRAIN PIPE AND FITTINGS BASED ON CONTROLLED INSIDE DIAMETER
ASTM F 1759 : 1997 Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
ASAE S376.1 : 1992 DESIGN, INSTALLATION AND PERFORMANCE OF UNDERGROUND, THERMOPLASTIC IRRIGATION PIPELINES
AASHTO M 294 : 2015 SPECIFICATION FOR CORRUGATED POLYETHYLENE PIPE, 300- TO 1500-MM (12- TO 60-IN.) DIAMETER
NSF 14 : 2016 PLASTICS PIPING SYSTEM COMPONENTS AND RELATED MATERIALS
ASTM D 6783 : 2005 : R2011 Standard Specification for Polymer Concrete Pipe
ASTM F 1986 : 2001 Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems
ASTM F 1987 : 2001 : R2006 Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems
ASTM F 2881/F2881M : 2018 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
ASTM F 2435 : 2015 : REDLINE Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe
ASTM F 891 : 2016 : REDLINE Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
ASTM F 2947/F2947M : 2014-03 SPECIFICATION FOR 150 TO 1500 MM [6 TO 60 IN.] ANNULAR CORRUGATED PROFILE-WALL POLYETHYLENE (PE) PIPE AND FITTINGS FOR SANITARY SEWER APPLICATIONS
ASTM A 1107/A1107M : 2017 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Steel Drainage Pipes
ASTM F 794 : 2003 : R2009 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter

NSF 61 : 2016 DRINKING WATER SYSTEM COMPONENTS - HEALTH EFFECTS
NSF 14 : 2016 PLASTICS PIPING SYSTEM COMPONENTS AND RELATED MATERIALS
ASTM D 1149 : 2016-02 TEST METHODS FOR RUBBER DETERIORATION - CRACKING IN AN OZONE CONTROLLED ENVIRONMENT
ASTM D 1414 : 2015 : REDLINE Standard Test Methods for Rubber O-Rings
ASTM D 1349 : 2014 : REDLINE Standard Practice for Rubber—Standard Conditions for Testing
ASTM F 913 : 2002 : EDT 1 Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
ASTM D 1566 : 2015 : REDLINE TERMINOLOGY RELATING TO RUBBER
ASTM D 471 : 2016-02 TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS

View more information
US$66.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.